Linklemo App For Smart WiFi Camera

Product Information

Specifications

• Product: Smart Camera
• Compatibility: WeChat/browser
• APP: Linklemo
• WiFi Support: 2.4GHz WiFi network
• Power Supply: Standard power outlet
• FCC Compliance: Part 15
• Radiation Exposure: Minimum distance of 20cm recommended

Product Usage Instructions

1. 1. Download and Install the APP:

Using WeChat/browser, scan the QR code provided in the manual or
search for “Linklemo” in the Apple Store/Google Play/Mobile App
Store to download and install the APP.

1. 1. Matters Needing Attention:
      • Ensure that Bluetooth is turned on and connect to a 2.4GHz WiFi
        network.
      • Avoid installing the camera near metal doors.
      • Grant necessary permissions through the APP for normal product
        usage.
      • Ensure sufficient power supply and proper connection.
      • Remove the protective film from the lens after
        installation.
   2. FCC Compliance:

The device complies with Part 15 of the FCC Rules. Follow the
guidelines provided to avoid interference and ensure proper
operation.

1. 1. Radiation Exposure Statement:

Operate the equipment with a minimum distance of 20cm between
the radiator and your body to comply with FCC radiation exposure
limits.

FAQ

Q: What should I do if the device cannot be
added?
A: Long press the MODE key for 5 seconds to re-enter the
distribution network mode.

Q: Can the device connect to a 5G WiFi
network?
A: No, the device supports only 2.4GHz WiFi networks.

Q: How do I ensure proper installation?
A: Avoid sticking the camera near metal doors, grant necessary
permissions through the APP, ensure sufficient power supply, and
remove the lens protective film after installation.

Smart camera
Instruction Manual
1. Download and Install the APP Using WeChat/browser, etc. , scan the QR code to download and install the APP, or search for”/Linklemo” in the Apple Store/Google Play/Mobile App Store and install it.
APP “/Linklemo”
2. APP Connection (1) Open the APP, register and log in; (2) Open the mobile phone settings to connect to 2.4G WiFi(wireless fidelity) and turn on the mobile phone Bluetooth; (3) Enter the distribution network mode a. Key payment: Long press ON / OFF for 2 seconds to open the machine, long press MODE for 5 seconds until the blue indicator light flashes to enter the distribution network mode; b. Dial payment: after turning on the key to open the machine, long press the MODE key for 5 seconds until the blue indicator light flashes into the distribution network mode; (4) Click “Add Device” in APP to automatically scan devices until the device ” is scanned (FIG. 1), click “Bind Now” corresponding device and click “Next” (FIG. 2). After adding the successful blue indicator lights on, you can customize the device name(FIG. 3), which means successful addition.

FIG.1

FIG.2

FIG.3

* If the device cannot be added for a long time, long press the MODE key for 5 seconds

to re-enter the distribution network mode

3. Matters Needing Attention

(1)Ensure that Bluetooth is turned on and WiFi network environment is good. The device

does not support 5G WiFi;

(2)Try not to stick to the metal door above the installation;

(3) You must set permissions through the APP to normally use the product;

(4)Ensure that the power supply is sufficient and the power supply is connected;

(5) After installation, please tear off the lens protective film before use.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Documents / Resources

ejoin Linklemo App For Smart WiFi Camera [pdf] Instruction Manual Linklemo App For Smart WiFi Camera, App For Smart WiFi Camera, Smart WiFi Camera, WiFi Camera, Camera

References

• User Manual