EESENS P32D1 Guardian Alarm Device

Product Specifications

• Alarm device
• Alarm remote
• Plastic zip tie x 2
• Screw driver x 1
• L wrench x 1
• Carabiner x 1
• Plastic spacers x 2
• Security screws

Product Usage Instructions:

Alarm Device Overview:
The alarm device is a versatile security tool that can be attached in various ways to enhance safety.

Initial Commissioning:
To start using the alarm device, follow the initial commissioning steps outlined in the manual.

Battery Replacement:
When the device indicates low battery, promptly replace it with a new CR2032 battery from the same brand. Ensure correct polarity and dispose of depleted batteries properly.

Alarm Controller Overview:
The alarm remote controls the alarm device and facilitates pairing and unpairing procedures.

Install Alarm Device:
Choose from various installation options based on your preference and needs using the provided tools and accessories.

Pairing a New Device:
Follow the steps to pair a new device ensuring they are within wireless range and follow the LED notifications for successful pairing.

Unpairing a Connected Device:
When needed, unpair a connected device by following the specified steps for successful unpairing.

Battery Instructions:
Proper battery maintenance is crucial for optimal performance and safety. Use recommended batteries, replace when needed, and follow disposal guidelines.

Water-resistant Instructions:
Maintain water resistance by securely installing the device and avoiding prolonged water exposure. Dry thoroughly if exposed to water.

Extended Wireless Instructions:
To maximize wireless range, consider environmental factors and battery status. Proper positioning and battery maintenance are key for optimal performance.

Open and Assembly Instructions:
Refer to the manual for detailed instructions on opening and assembling the device components as needed.

What’s in the Box:

Alarm device Overview

Initial commissioning

Battery Replacement

Alarm controller overview

Initial commissioning

Battery Replacement

Install alarm device

Option 1: Attach to Water Bottle Cage Braze-ons (Without Water Bottle Cage)

• Tools Needed: L-wrench, two security screws, alarm device

Option 2: Attach to Water Bottle Cage Braze-ons (With Water Bottle Cage)

• Tools Needed: L-wrench, two security screws, alarm device, two spacers, your water bottle cage

Option 3: Attach Using Zip Ties on a Strong Tube

Option 4: Attach Using a Carabiner

Option 5: Mount Using an Alarm Fixture Accessory (Available at EESENS Store)

Pairing a new device
Ensure the alarm device and the controller are within wireless range of each other.

1. Short Press the device button to select the desired alarm device color
2. Restart the alarm device and listen for the pairing sound notification ( x5).
3. Long Press the device buttonuntil the LED flashes continuously before pairing mode ends.
4. Quick Beeps (x2) indicate that pairing has succeeded.

Unpairing a connected device
Ensure the alarm device and the controller are within wireless range of each other.

1. Short Press the device button to select the desired alarm device color.
2. Long Press the device button while simultaneously switching from OFF to SOUND
3. Release the device button when the alarm device emits the disarm sound. Unpairing has succeeded.

Battery instructions

• Use new CR2032 batteries in good condition from the same brand to maximize battery capacity.
• Replace the batteries immediately when the device shows a low power indicator. Performance decreases when battery voltage is low.
• Ensure batteries are inserted with the correct polarity (+ and -). Incorrect polarity can short-circuit the battery terminals. There is a risk of burns from contact with leaking or damaged batteries.
• Remove the battery when it’s depleted or if the device will not be used for an extended period.
• For optimal performance, we recommend using our certified batteries, available at Eesens.com.
• Follow the battery manufacturer’s usage and disposal guidelines. Improper use or disposal may cause damage to the device or overheating.

Water-resistant instructions

• Use the supplied tool to securely screw the alarm device in place.
• Do not remove the silicone ring.
• The controller is rain-resistant, and the device is resistant to water splashes. However, do not expose it to water for extended periods.
• If the device is exposed to water, dry it thoroughly before opening the cover.

Extended wireless instructions

• The wireless range can be affected by environmental factors such as walls, metal, water, living beings, or other wireless devices.
• To maximize the range, place the controller in an open area, away from metal, living beings, walls, or floors.
• A low battery will reduce the wireless range. Replace the batteries as soon as you receive a low battery notification.

Open and assembly instructions

• Open the top cover of the alarm device by using your finger to lift through the designated slot.

• Assemble the top cover by aligning and pushing the top and bottom covers together. When assembled correctly, you will hear two clicks.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note:

• The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
• The device has been evaluated to meet general RF exposure requirement.
• This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.

FAQs

Q: What should I do if my alarm device is not pairing with the controller?
A: Ensure both devices are within range, follow the pairing steps carefully, and consider replacing batteries if needed.

Q: Can I use rechargeable batteries with the alarm device?
A: It is recommended to use new CR2032 batteries for optimal performance. Rechargeable batteries may not provide the same level of performance.

Documents / Resources

EESENS P32D1 Guardian Alarm Device [pdf] User Manual 2BM8M-P32D1, 2BM8MP32D1, P32D1 Guardian Alarm Device, P32D1, Guardian Alarm Device, Alarm Device, Device

References

• User Manual