Edwards CS2490 Class 2 Signaling Transformer
Product Information
Specifications
- Model: CS2490
- Input Voltage: 16 Volts
- Output Power: 40 Volt-Amps
- Dimensions:
- A: 2 15/16 inches
- B: 1 5/8 inches
- C: 2 1/4 inches
- D: 2 1/8 inches
- E: 2 inches
Product Usage Instructions
- Place the transformer on a flat, stable surface.
- Ensure that the input voltage matches the specified 16 Volts.
- Connect the appropriate devices to the output terminals.
- Turn on the power using the designated switch/button.
- Monitor the device connected to the transformer for proper functioning.
- When not in use, disconnect the devices and turn off the power.
FAQ
- Q: Can I use this transformer with devices that require lower voltage?
- A: It is not recommended to use this transformer with devices that require lower voltage as it may damage them. Always match the input requirements of your devices with the transformer’s output voltage.
- Q: Is it safe to operate the transformer continuously for long durations?
- A: The transformer is designed to operate safely for extended periods; however, it is advisable to give it breaks to prevent overheating. Refer to the user manual for specific guidelines on continuous usage.
Applications Bulletin
AEBN: 230323
Date: March 23, 2023
Subject: CS2490, 16-Volt, 40 Volt-Amp Transformer
Edwards CS2490 Class 2, Signaling Transformer is easy to install. Mounts in a standard 1/2″ (13mm) knockout or surface mounts using the provided foot mounts. This transformer is suitable for mounting in both plastic and metal electrical boxes. May also be used with the 593- transformer plate for enclosed mounting in a standard two-gang electrical box.
The CS2490 transformer is suitable for standard doorbells and chimes in residential and commercial applications requiring 16-volt AC. This transformer is a 16-volt AC, low-voltage power source for residential, commercial, and industrial uses.
Features and Specifications
- Non-regenerative thermal overload protection
- Grounding wire
- Pre-stripped primary side pigtail wires
- Screw terminal connections on secondary
- Primary, 120 VAC, 50/60 Hz
- Secondary, 16 VAC, 40Volt-Amp
Dimensions
Documents / Resources
 |
Edwards CS2490 Class 2 Signaling Transformer [pdf] User Guide CS2490 Class 2 Signaling Transformer, CS2490, Class 2 Signaling Transformer, 2 Signaling Transformer, Signaling Transformer, Transformer |
