TWS1 Pro True Wireless Stereo Earbuds www.edifier.com

Product description and accessories

Note: • There are different size of ear tips attached in the package, please select the suitable ones to wear. • Images are for illustrative purposes only and may differ from the actual product.

User guide

Charge the earbuds

• You may hear a warning tone when the earbuds are at a low battery level, please place the earbuds in the case for charging.
•  Charging time: around 1.5 hours for a full charging

Charge the charging case

•  Indicator steady lit = charging Indicator off = fully charged
•  Charging time: around 40 minutes for a full charging
• 

Indicator

• When the charging case is opened/closed, the indicator will show the case’s battery level; if the indicator flashes three times slowly: high battery level; if the indicator flashes twice slowly: medium battery level; if the indicator flashes once slowly: low battery level; if the indicator flashes three times rapidly: excessively low battery level, please charge the case in time. Input: 5V= 60mA(earbuds) 5V 1.5A=(charging case)

Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in fire to prevent an explosion.

• Power on when taken out of the charging case.
• Power off when placed in the charging case.

• Bluetooth connection
• For initial connection, the earbuds will auto-enter the pairing mode after being taken out;
•  When connected to other mobile phones, take the earbuds out and press and hold the touch button of the left or right earbud for around 2-3 seconds to enter Bluetooth pairing
•  Bluetooth pairing: red and blue lights flash rapidly

•  Search for and connect to “EDIFIER TWS1 Pro”, after pairing is successful, the blue light will flash slowly.
• TWS pairing of the left and right earbuds
• The left and right earbuds have finished TWS pairing before leaving the factory.
• When the earbuds are in the charging case, respectively click the touch buttons of the left and right earbuds five times to enter TWS pairing mode, the blue light will flash rapidly.
•  After pairing is done, the blue light will flash rapidly, and then the red light will be steady lit. Clear pairing records
• Clear pairing records
• Functional operation

Accept a call: single-click the left or right earbud Decline/end a call: press and hold the left or right earbud Pause/Play: single-click the left or right earbud Previous track: double click the left earbud Next track: double click the right earbud Volume up: press and hold the right earbud Volume down: Press and hold the left earbud

FAQs

When charging the charging case, the indicator is off.

• Please ensure the charging case is correctly connected with the power source.

No sound

•  Check if the earbuds are operating.
•  Check if the earbud’s volume is at an appropriate level.
•  Check if the earbuds are correctly connected to the mobile phone.
•  Check if the earbuds are operating within a normal working range.

The call quality of the earbuds is not good.

•  Check if the mobile phone is in an area with a strong signal.
•  Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone.

When playing music, cannot control pause/play/previous track/next track via the earbuds.

•  Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.

Maintenance

•  If it is not used for long periods of time, please charge the product with a lithium battery every three months.
•  Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
•  Do not put the product in places exposed to the sun or with high temperatures. The high temperature will shorten the service life of electronic components, damage the battery, and make plastic components deformed.
• Do not put the product in cold places to avoid damaging the internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with a hard object to avoid damaging the internal circuit.
•  Do not use drastic chemicals or cleaner to clean the product.
•  Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting facade.

Model: EDF200017 Edif is International Limited P.O. Box 6264 General Post Off ice Hong Kong www.edifier.com 2021 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade, the information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.

SPECIFICATIONS

FAQS

Documents / Resources

Edifier TWS1 Pro [pdf] User Manual TWS1 Pro, TWS1, EDF200017, Edifier

References

• User Manual