EDIFIER K800 USB Computer Headset User Guide
USB K800
USB Computer Headset
Product Description
Functional Operation
Power on: Please insert the USB-A plug of the headset into a computer, the headset should be ready to go and blue LED light will be steady lit, now you can play or input audio;
Power off: Please unplug the USB-A plug from the computer, LED light will be off;
Mute: Please switch to mute state through the computer, microphone will turn off and red LED light will be lit;
Volume control: Please adjust the headset and microphone volume through the computer.
Note: Images are for illustrative purposes only and may differ from the actual product.
Maintenance
- Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2020 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly
different from actual product. Images are for illustrative purposes only and may differ from the actual product.
Documents / Resources
 | K800 USB Computer Headset |
Does Edifier K800 USB Headphone supports OTG USB to Type-C for regular headphone audio purposes?
Does the Edifier K800 USB headset support OTG USB to Type-C adapters for audio?
The Edifier K800 USB Computer Headset is designed primarily for use with computers via a standard USB-A plug. While the manual does not explicitly mention OTG (On-The-Go) support, many USB-A headsets can function with mobile devices or laptops using a high-quality USB-A to USB-C OTG adapter.
However, please note the following limitations based on the user guide:
Read the full Q&A page
mute option is not working. Been trying to mute through the computer but the lights is not turning red
Why is the mute light not turning red when I try to mute the Edifier K800 USB headset through my computer?
According to the Functional Operation section of the Edifier K800 USB manual, the mute function and its corresponding LED indicator are controlled directly by your computer's software state rather than a physical switch on the headset.
To troubleshoot the mute light not turning red:
If the microphone successfully mutes in your software but the light remains blue (or off), there may be a hardware fault with the LED indicator on the inline controller.
Read the full Q&A page