WS69 Wireless 7 In 1 Outdoor Sensor Array

Product Information

Specifications

• Model: WS69 Sensor
• Components: Rain bucket, Wind sensor, Temperature and humidity
  sensor
• Connectors: 5-pin connectors
• Mounting: Secured with screws

Product Usage Instructions

Part 1: Rain Bucket Disassembly and Assembly

1. Loosen the two screws securing the rain bucket to the main
   unit.
2. Remove the rain bucket carefully.
3. Lift up the black plastic part and unplug the 5-pin
   connector.
4. Separate the rain bucket from the main unit.
5. To replace the rain bucket, follow the steps in reverse order
   ensuring a secure connection of the 5-pin plug.

Part 2: Wind Sensor Part

1. Loosen the screw securing the wind speed and direction sensor
   to the main unit.
2. Remove the screw to separate the wind sensor from the main
   unit.
3. Loosen the fixing screw between the wind speed and wind
   direction sensors.
4. Detach and unplug the two 5-pin connectors from the wind sensor
   unit.
5. To replace the wind sensor unit, follow the steps in reverse
   order ensuring correct insertion of the 5-pin plugs.

Part 3: Temperature and Humidity Sensor

1. Loosen the two screws securing the shield outside the
   temperature and humidity module.
2. Remove the shield to access the sensor module.
3. Unplug and replace the temperature and humidity sensor
   module.
4. To replace the sensor, follow the steps in reverse order
   ensuring proper installation and screw tightening.

Frequently Asked Questions (FAQ)

Q: How do I ensure correct reassembly of the components?

A: When reassembling, follow the disassembly steps in reverse
order carefully. Pay attention to connector orientation and proper
screw tightening.

Q: Can I use any replacement sensor modules?

A: It is recommended to use compatible replacement sensor
modules to ensure proper functioning of the WS69 Sensor.

WS69 Sensor Parts Disassembly & Installation Manual
This guide provides a step-by-step explanation of how to disassemble and assemble the various parts of the WS69, including how to replace the rain bucket, the wind sensor, and the temperature and humidity sensor.
Part 1 Rain bucket Disassembly and Assembly
1. The rain bucket is secured to the main unit with two screws. Loosen these screws.
2. Remove the rain bucket.
1/4

3. Lift up the black plastic part. Unplug the 5-pin connector.
4. The rain bucket can now be completely separated from the main unit.
5. To replace the rain bucket: Simply follow the above steps in reverse order. Insert the 5-pin plug into the connector and make sure it is securely connected. Assemble the rain bucket to the main unit. Tighten the two screws to secure it in place.
Part 2 Wind Sensor Part
1. The wind speed and direction sensor is secured to the main unit with one screw. Loosen this screw.
2/4

2. Remove the screw, and the wind speed and direction sensor will separate from the main unit.
3. There is a fixing screw between the wind speed and wind direction sensors. Loosen this screw.
4. Detach the two parts.
5. Unplug the two 5-pin connectors and remove the them from the wind speed and direction sensor unit.
6. To replace the wind speed and direction sensor unit Simply follow the above steps in reverse order. First, insert the two 5-pin plugs into the wind direction sensor sockets. Pay special attention that the black 5-pin plug corresponds to the J1 socket on the PCB board. Then assemble the wind direction sensor part with the wind speed sensor part.
3/4

Part 3 Temperature and humidity sensor
1. The shield outside the temperature and humidity module is secured with two screws. Loosen these screws.
2. Remove the entire shield.
3. Unplug the temperature and humidity sensor module and replace it with a new one.
4. To replace the temperature and humidity sensor, simply follow the above steps in reverse order: first insert the new sensor module, then install the four rain shields, and finally tighten the screws.
4/4

Documents / Resources

ecowitt WS69 Wireless 7 In 1 Outdoor Sensor Array [pdf] Instruction Manual WS69, WS69 Wireless 7 In 1 Outdoor Sensor Array, Wireless 7 In 1 Outdoor Sensor Array, 7 In 1 Outdoor Sensor Array, Outdoor Sensor Array, Sensor Array

References

• User Manual