

User Guide
Wireless Controller
PAR-WT60R-E
PAR-WT60R-E Wireless Controller

| Button | Function | |
![]() |
Forced DHW Boost | Used to allow Ecodan to force start the Domestic Hot Water (DHW Mode) |
![]() |
Holiday Mode | Used to allow Ecodan to enter Holiday Mode |
| Up / Down | Used to adjust room temperature and set duration time in Holiday Mode | |
| Main Screen Icons | Description | ||
| A | DHW Boost Indicator | Indicates that Ecodan is in Domestic Hot Water (DHW) Boost Mode | |
| B | Holiday Mode Indicator | Indicates that Ecodan is in Holiday Mode | |
| C | Set Temperature Display | Indicates the set room temperature | |
| D | Room Temperature Display | Indicates the room temperature | |
| E | Room Sensor Status | Indicates this remote controller is used to measure the room temperature | |
| F | SG-Ready Display | Indicates Smart Grid ready | |
| G | Battery Replacement Indicator | Indicates when to replace batteries | |
| H | Touch indicator | Indicates when buttons are touched | |
| I | Error Display | Indicates unit failure or communication error received | |
| j | Error LED | Mode | Flash |
| Failed* | 1 time per 3 minutes | ||
| Back up heater operation | |||
| Low battery | 1 time per 3 minutes | ||
*When any malfunction occurs in the indoor unit, outdoor unit, remote controller or receiver.
Documents / Resources
![]() |
ecodan PAR-WT60R-E Wireless Controller [pdf] User Guide PAR-WT60R-E Wireless Controller, PAR-WT60R-E, Wireless Controller, Controller |


