S866 LCD Instruments
“
Product Specifications
- Product Name: S866 LCD Instrument
- Version: V1.0
- Functionality: Vehicle control and display functions
- Display: LCD
- Power Supply: Electric vehicle
Product Usage Instructions
I. Function and Display
The instrument includes various operation buttons and indicators
for vehicle control and display functions.
II. Functional Operation
- Turn on and turn off:
- Display Interface:
- 2.36 km/h to promote functions:
- Multifunctional Area Display:
Long press the Keyboard to boot the instrument and long press
the Key to shut it down. The instrument will automatically shut
down after 10 minutes of inactivity when the vehicle is
stationary.
Long press the Keyboard to enter the display interface. You can
turn on the headlights by pressing the Keyboard, and help shift
between different power levels by short pressing the Key.
Hold down the Key to display the gear area and release it to
cancel the function.
Short press the Key to switch between viewing ODO, TRIP, VOL,
and TIME information.
The menu allows for parameter modification and setting
adjustments for various functionalities of the instrument.
Frequently Asked Questions (FAQ)
Q: How do I troubleshoot if the instrument is not functioning
correctly?
A: If you encounter issues with the instrument’s performance,
refer to the troubleshooting section in the manual or contact
customer support for assistance.
“`
Chinese Operating Manual for S866 LCD Instruments V1.0
Distinguished users, before you use the S866 LCD instrument, please read this operation manual in detail.The manual will guide you to use the instrument correctly to realize various vehicle control and vehicle display functions. I. Function and Display
4
5
1
6
2
7
3
8
9
12
11
1
Operation button UP 8
key
2
Operation button 9
SW key
3
Operating button 10
key
Brake sign
Troubleshooting (not used)
Real-time riding speed 11
(metric)
4
Real-time
riding
speed
(British
5
system)
6
12
7
5Section Electricity Indicator
Riding mileage (metric system)
II. Functional operation 1Turn on and turn off
Long press Keyboard, boot; long press Key, shut down.When the vehicle stops driving and does not operate the instrument for 10 minutes, the instrument will automatically shut down and turn off the power supply of the electric vehicle. 2Display Interface 1
Long press Keyboard, boot, enter the display interface one.
2.1 Turn on the headlights
Long press Keyboard, turn on backlights and car lights; press again Keyboard, turn off backlights and car lights. 2.2Help shift
Short press or Key, switch 1-5 files.The lowest power level in 1 gear and the lowest power level in 5 gear High power.The initial gear is automatically restored every time the machine is turned on.0 gear powerless function.
2.36 km/h to promote functions
Hold down Key, Gear Area Display Vehicles
travel at speeds not exceeding 6Km/h.release Key, function revocation.
2.4Multifunctional Area Display
Short press Key, looping switch to view ODO-TRIPVOL-TIME-ODO information.
3Fault code display III. Menu Item Settings 1P01-P20 Menu Display Interface and Significance Explanation
P01Backlight brightness the darkest level 1, the brightest level 3; P02: mileage unit 0: KM; 1: MILE; P03: Voltage level: 24V, 36V, 48V, 60V; P04: Dormancy time 0, not dormancy; Other numbers are dormancy times, range: 1-60; Unit minutes; P05: PAS number selection: 0,3 file mode1,5 gear mode: P06: Wheel setting: unit, inch; wheel diameter value: 5.0 ~ 50 Precision: 0.1 inch This parameter is related to the meter display speed and needs to be entered correctly; P07: Speed gauge magnetic steel number: range: 1-100; This parameter is related to the meter display speed and needs to be entered correctly; If it is an ordinary hub motor, the number of magnetic steel is input directly; If it is a high-speed motor, it is also necessary to calculate the deceleration ratio, and the input data = the number of magnetic steel × deceleration ratio;
For example: number of motor magnets 20, deceleration ratio 4.3: input data is: 86 = 20 × 4.3 P08: Speed limit setting: Agreement No. 2 range 0-100km / H, 100 means no speed limit; The input data here represents the maximum operating speed of the vehicle: for example, input 25, indicating that the maximum operating speed of the vehicle will not exceed 25km/h; The drive speed is maintained at the set value, Error: ± 1km/h; (The speed limit for power and turning is equal) Note: The value here is based on kilometers. When the unit setting is converted from kilometers to miles, the speed value of the display interface automatically converts to the correct mile value, but the speed limit value data set at this menu under the mile interface is not converted. Is inconsistent with the actual speed limit of the mile speed; P09: zero start, non-zero start setting 0: zero start; 1: Non-zero start; P10: The drive mode is setting 0: Power Drive(how much power is output is determined by the power file bit, and the switch is invalid at this time). 1: Electric drive(by turning the handle drive, the power file bit is invalid at this time). 2: Power Driven and Electric Driven Coexistence P11: Help sensitivity settingrange: 1-24; P12: Help start intensity settingrange: 1-5; P13: Power Magnetic Steel Disk Type Setting 5, 8, 12
Magnetic Steel Types P14: Controller limit value settingrange: 1-20A P15: Controller undervoltage P16: ODO zero setting length press key 5 seconds ODO zero P17 :Automatic cruise optional0: No enabling cruising, 1: enabling cruising; (valid for protocol 2 only) P18: Display speed ratio adjustment range: 50 % ~ 150 %, P19:Zero PAS selection 0: 0 file, 1: does not include 0 file P20 :0:2 Protocol 1:5 S Protocol 2: Standby 3: Standby
2Menu option parameter modification operation After the instrument is turned on, press long at the same time
key+ Key into P01 menu interface, press short Keys can be switched to the next menu; in the current menu, Click Key sum Keys can modify the current menu parameters; after modification, press short Keys can be switched to the next menu.After menu parameters have been modified, press again at the same time key+ Key, Exit menu interface, return to normal display interface. Among them, the P16 menu parameter value is the current cumulative total mileage, the value can not be modified, but can be cleared.Long press Keyboard 5 seconds, total mileage cleared. 3Instrument body shape size and wiring indication
Documents / Resources
 |
EBIKESFORUM S866 LCD Instruments [pdf] Instruction Manual S866, S866 LCD Instruments, LCD Instruments, Instruments |