200A12VDC Remote Intelligent Remote Control Switch
“
Product Information
Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 0cm between the radiator and body
Product Usage Instructions
Caution:
Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate
this equipment.
Compliance:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including
interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. It should be installed and
operated with a minimum distance of 0cm between the radiator and
your body.
FAQ
Q: Can I modify the device?
A: No, any changes or modifications not explicitly approved by
the manufacturer could void your authority to operate the
equipment.
Q: What are the compliance conditions for the device?
A: The device must not cause harmful interference and must
accept any interference received.
Q: How should I install the equipment regarding radiation
exposure?
A: The equipment should be installed and operated with a minimum
distance of 0cm between the radiator and your body to comply with
FCC regulations.
“`
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 |
eBay 200A12VDC Remote Intelligent Remote Control Switch [pdf] Instructions 2BOPP-200A12VDC, 2BOPP200A12VDC, 200A12VDC Remote Intelligent Remote Control Switch, 200A12VDC, Remote Intelligent Remote Control Switch, Intelligent Remote Control Switch, Remote Control Switch, Control Switch |