EasySMX S10 Gaming Controller User Manual

EasySMX S10 Gaming Controller

USER MANUAL

Product Overview

The S10 is a versatile wireless gaming controller designed for Switch platforms, supporting key features including NFC, gyroscope, wake-up, one-touch voice chat, and HD rumble. It is compatible with Switch, Switch OLED, Switch Lite, Switch 2, PC, Android, and iOS devices.

Button Layout

Connection Instructions

Connecting to Switch

First-Time Connection with Switch 2:

• Slide the Mode Toggle to the “S” mode.
• Hold the HOME button for 3 seconds until the LED starts flashing rapidly.
• On the Switch console, navigate to [Controllers] > [Change Grip/Order]; when the LED turns solid and a short vibration occurs, pairing is successful
• Within 20 seconds after pairing, remove the Joy-Con controllers from the console and reattach them— this action activates the wireless wake-up function (only required during first-time connection).

First-Time Connection (Switch/Switch OLED):

• Slide the Mode Toggle to the “S” mode.
• Press and hold the Home button for 5 seconds to power on.
• The controller’s LED will flash (indicating pairing).
• On the Switch, navigate to Controllers > Change Grip/Order to enter pairing mode.
• When the LED becomes steady with a short vibration to confirm pairing.

Reconnection:

Keep the Mode Toggle under “S” mode, and short-press the Home button to reconnect your Switch.
【Additional Notes (S Mode)】

• Short press Home button: One-key wake-up.
• Short press “C” button: Quick access to in-game voice chat (specific scenarios).
• Short press Capture button: Quick capture.

Connecting To PC / Mobile Phone

First-Time Connection (Wired on PC)：

• Slide the Mode Toggle to the “X” mode.
• Connect the controller to PC via Type-C cable.
• When the LED becomes steady with a short vibration to confirm pairing.

First-Time Connection (BlueTooth on Mobile)：

• Slide the Mode Toggle to the “X” mode.
• Press and hold the Home button for 3 seconds to power on.
• The controller’s LED will flash (indicating pairing).
• Enable Bluetooth on your phone / PC, then search for “Xbox Wireless Controller” and select it to pair.
• When the LED becomes steady with a short vibration to confirm pairing.

Reconnection：

Keep the Mode Toggle under “X” mode, and short-press the Home button to reconnect your phone.

Turbo Settings

• Manual Turbo:
  Press M & A to activate continuous firing while holding the “A” button.
• Automatic Turbo:
  Press M & A a second time, press A to activate auto-turbo, press again to pause auto-turbo.
• Cancel Turbo:

Press M & A a third time to cancel turbo.【Note】 (Adjustable Turbo Speed: Level 1 to 3):

① Press M & turn Left Stick left to decrease Turbo speed.
② Press M & turn Left Stick right to increase Turbo speed.
③ Only A, B, X, Y, L, R, ZR, and ZL can be set turbo.

Programming GL & GR Button Settings

To Program A Button:

① While connected, press and hold M & GL/GR. The RGB LED will slowly flash red, indicating programming mode.

② Press the buttons you want to program (e.g., A or A & B) to assign a newfunction.
③ Press GL/GR to save and exit programming mode.

To Cancel A Programming Function:

Press and hold M & GL/GR until the RGB LED slowly flashes red, then press GL/GR to clear the button’s function.

【【NotNotee】】
PrProgrogrammable Buttammable Buttons: A / B / X / Y / ZR / ZL / L / R / L3 / R3 / – / + / D-padons: A / B / X / Y / ZR / ZL / L / R / L3 / R3 / – / + / D-pad

RGB Lighting Adjustment

• Cycle Lighting Modes:
  Press M buttM button twiceon twice to cycle through, a short vibration confirms a successful RGB. Then turn the Left TLeft Triggerrigger up or down to switch between different RGB modes:
• Mode 1: Dynamic (colorful)
• Mode 2: Breathing effect (Turn the Left Stick left or right to cycle colors)
• Mode 3: Solid color (Turn the Left Stick left or right to cycle colors)
• Mode 4: Gradient effect
• Mode 5: Off
• Adjust Brightness:
  Press Left Stick down to adjust brightness (Level 1 to 4).

Vibration Adjustment

• Increase vibration intensity: Press M & turn Left Stick up.
• Decrease vibration intensity: Press M & turn Left Stick down.

【Note】
Available settings: Level 0 to 4 vibration intensity.

Joysticks And Motion Sensor Calibration

Calibration Process:

① Keep the controller connected, press “+” & “-” & “B” to enter calibration mode

② The Indicator LEDs will flash alternately as red.
③ Rotate both left and right sticks clockwise for 3 full rotations.
④ Place the controller on a flat surface and press the “B” button.

Charging And Power

Charging Indicators:

① Off State: When charging, the Indicator LED flashes red. The LED turns green once fully charged.
② Connected State: The LED indicates the current mode.
(X-input Mode / D-input Mode / Switch Mode)

Power Off:
Press and hold the Home button for 5 seconds to power off, or the controller will automatically shut down after 10 minutes of inactivity.

Low Battery Warning:
When connected, if both Indicator LED flashes red rapidly, it indicates low battery. Please recharge promptly.

Safety Information

Before operating the device, please read and adhere to the following safety precautions to ensure optimal performance and avoid hazards:

1. Operating Temperature:
Use the device between 0°C to 35°C. Store the device and accessories between -10°C and 40°C. Extreme temperatures may cause malfunctions.

2. Small Parts Warning:
Keep the device and its accessories out of reach of children to prevent accidental damage or choking hazards.

3. Water and Moisture:
Do not expose the device or accessories to rain or moisture to avoid the risk of fire or electric shock.

4. Heat and Sunlight:
Keep the device and battery away from fire, high temperatures, and direct sunlight.

5. Battery Safety:

• Do not throw batteries into fire.
• Do not dismantle, crush, or modify the battery.
• Do not immerse batteries in water or other liquids.
• Avoid external impact or pressure on the battery to prevent leakage, overheating, fire, or explosion.

6. Battery Replacement:
Do not attempt to replace the battery yourself, as improper handling may lead to overheating or fire.

7. Tampering:
Do not disassemble or modify the device or its accessories, including the built-in battery, as this will void the warranty.

8. Disposal:
Dispose of the device, battery, and accessories in accordance with local regulations. Improper disposal may result in battery explosion.

Customer Support & Warrant

Warranty: We provide 1-year warranty. If you experience any issues, please contact us for support.
Returns & Replacements: If your product is defective or damaged, we offer hassle-after-sale service within the warranty period

Specifications

• Model: S10 Gaming Controller
• Connection: Type-C
• Turbo Speed Levels: 1 to 3
• Vibration Intensity Levels: 0 to 4
• RGB Lighting Options: RGB0-1-2-3

Contact Us

For technical support, warranty claims, or general inquiries, reach out to us: Manufacturer: Shenzhen Yisuma Network Technology Co., LTD
Email: support@easysmx.com
Web: www.easysmx.com/pages/contact-us
Add: Jiaxiye Square 1155, Minzhi St. 318, Shenzhen, Guangdong, CN

Frequently Asked Questions (FAQ)

Q: How can I adjust the vibration intensity of the controller?

A: You can adjust the vibration intensity from Level 0 to Level 4. Refer to the Vibration Adjustment section in the user manual for detailed instructions.