EasySMX D10 Multiplatform Gaming Controller User Manual

EasySMX D10 is a multi-mode gaming controller that supports 2.4G, Bluetooth, wired connection. It is compatible with PC, Switch, and Android/iOS devices (iOS 13.0 or later, MFI-certified games).

Connection Instructions

Connecting to PC

2.4GHz Receiver Connection:

Insert the receiver into a USB port on your PC.
Slide the ‘Mode Toggle’ to the (2.4 Ghz) Mode
Press the Home button to power on.
The controller’s LED will flash (indicating pairing).
When the LED becomes steady with a short vibration to confirm pairing.

Forced Pairing (if auto-reconnection fails):

Insert the wireless receiver into a USB port on your PC, press and hold the receiver’s button for 3 seconds until its LED flashes rapidly.
With the controller powered off, press and hold the Home button for 3 seconds to power on.
The LED will flash rapidly, then become steady with a short vibration to confirm pairing.

Wired Connection:

Slide the Mode Toggle to the (2.4 GHz) mode.
Connect the controller to the PC using a USB cable.

Connecting to a Mobile Phone

First-Time Connection:

Slide the Mode Toggle to the Bluetooth mode.
Press and hold the Home button for 3 seconds to power on.
The controller’s LED will flash (indicating pairing).
Enable Bluetooth on your phone, then search for “Xbox Wireless Controller” and select it to pair.
When the LED becomes steady with a short vibration to confirm pairing.

Reconnection:

Keep the Mode Toggle under Bluetooth mode, and short-press the Home button to reconnect your phone.

Connecting to a Nintendo Switch

First-Time Connection:

Slide the Mode Toggle to the Switch mode.
Press and hold the Home button for 3 seconds to power on.
The controller’s LED will flash (indicating pairing).
On the Switch, navigate to Controllers > Change Grip/Order to enter pairing mode.
When the LED becomes steady with a short vibration to confirm pairing.

Reconnection:

Keep the Mode Toggle under Switch mode, and short-press the Home button to reconnect your Switch.

【Note】In Switch mode, double-click the M button to take screenshots and press the Home button to wake the console.

Controller Mode Switching

While in 2.4GHz or wired connection mode, you can switch between controller modes:

Long-press View & Menu Button for 3 seconds to cycle through:
①X-input mode (blue LED)
②D-input mode (red LED)

A short vibration confirms a successful mode switch.

Turbo Settings

Manual Turbo:
Press M & A to activate continuous firing while holding the “A” button.
Automatic Turbo:
Press M & A again to toggle auto-firing. The “A” button will now automatically trigger continuous firing with a single press.
Cancel Turbo:
Press M & A a third time to disable continuous firing.

【Note】①Press M & Right Stick Down to decrease Turbo speed.
②Press M & Right Stick Up to increase Turbo speed.
③Only A, B, X, Y, LB, RB, LT, and RT can be set turbo.

Programming Back Button Settings

To Program a button:
①While connected, press and hold M & M1/M2. The left RGB LED will slowly flash white, indicating programming mode.
②Press the buttons you want to program (e.g., A or A & B) to assign a new function.
③Press M1/M2 to save and exit programming mode.
To Cancel a Programming Function:
①Press and hold M & M1/M2 until the left RGB LED slowly flashes white,
②then press M1/M2 to clear the button’s function.

RGB Lighting Adjustment

Cycle Lighting Modes:
①Press M & R3 to cycle through:
Mode 1: Dynamic (colorful)
Mode 2: Breathing effect
Mode 3: Solid color (press Left Stick & Right Stick together to cycle colors)
Mode 4: Off
Adjust Brightness:
①Press M & turn Left Stick left to decrease brightness.
②Press M & turn Left Stick right to increase brightness.

【Note】When the controller is in the charging dock, the dock’s RGB lighting synchronizes with the controller’s settings. Users can choose to enable or disable the dock’s lighting.

Vibration Adjustment

Increase vibration intensity: Press M & turn Left Stick up.
Decrease vibration intensity: Press M & turn Left Stick down.

【Note】Available settings: 0%, 30%, 60%, and 100%.

Joysticks Mode Switching

Dead Zone Adjustment:
①While connected, press and hold Left Stick & View button for 3 seconds to switch between “zero dead zone” and “with dead zone” modes.
②The default setting is “with dead zone.”
Mode Switching:
①While connected, press and hold Right Stick & Menu button for 3 seconds to switch the axis boundary between “circle” and “square” modes.
②The default axis boundary is “circle.”

Joysticks and Triggers Calibration

Calibration Process:
①In power-off mode, press Left Stick & RB & Home to enter calibration mode.
②The Indicator LEDs will flash alternately as red and green.
③Rotate both left and right sticks clockwise for 3 full rotations and fully press both left and right triggers three times at a consistent speed.
④Place the controller on a flat surface and press the “A” button.
⑤Calibration completes as the controller automatically enters motion sensor calibration (indicated by flashing blue LED), then the controller will power off automatically.

Charging and Power

Charging Indicators:
①Off State: When charging, Indicator LED2 remains solid. The LED turns off once fully charged.
②Connected State: The LED indicates the current mode.
(X-input mode / D-input mode / Switch Mode)
Power Off:
①Press and hold the Home button for 5 seconds to power off, or the controller will automatically shut down after 10 minutes of inactivity.
Low Battery Warning:
①When connected, if both Indicator LED2 flash rapidly, it indicates low battery. Please recharge promptly.

Product Specifications

Model: D10
Operating Current: <45mA
Battery Capacity: 1000mAh
Sleep Current: <20μA
Input Voltage: 5V
Charging Time: Approximately 3 hours

Package Contents

Wireless Controller ×1
2.4GHz Receiver ×1
Charging Dock ×1
Type-C Data Cable ×1
User Manual ×1

Safety Information

Before operating the device, please read and adhere to the following safety precautions to ensure optimal performance and avoid hazards:

Operating Temperature:
Use the device between 0°C to 35°C. Store the device and accessories between -10°C and 40°C. Extreme temperatures may cause malfunctions.
Small Parts Warning:
Keep the device and its accessories out of reach of children to prevent accidental damage or choking hazards.
Water and Moisture:
Do not expose the device or accessories to rain or moisture to avoid the risk of fire or electric shock.
Heat and Sunlight:
Keep the device and battery away from fire, high temperatures, and direct sunlight.
Battery Safety:
• Do not throw batteries into fire.
• Do not dismantle, crush, or modify the battery.
• Do not immerse batteries in water or other liquids.
• Avoid external impact or pressure on the battery to prevent leakage, overheating, fire, or explosion.
Battery Replacement:
Do not attempt to replace the battery yourself, as improper handling may lead to overheating or fire.
Tampering:
Do not disassemble or modify the device or its accessories, including the built-in battery, as this will void the warranty.
Disposal:
Dispose of the device, battery, and accessories in accordance with local regulations. Improper disposal may result in battery explosion.

Customer Support & Warrant

Warranty: We provide 1-year warranty. If you experience any issues, please contact us for support.
Returns & Replacements: If your product is defective or damaged, we offer hassle-after-sale service within the warranty period.

Contact Us

For technical support, warranty claims, or general inquiries, reach out to us:
Email: support@easysmx.com
Web: www.easysmx.com/pages/contact-us

FAQs & Troubleshooting

Visit our Discord server: Official EasySMX Server for common questions, troubleshooting guides, and software updates.

Documents / Resources

EasySMX D10 Multiplatform Gaming Controller [pdf] User Manual
D10, D10 Multiplatform Gaming Controller, Multiplatform Gaming Controller, Gaming Controller

References

User Manual

Product Overview