e-conolight C-SW-B Series LED Stairwell Light with Emergency Battery Backup
Specifications
- Input Voltage: 120-277v
- Wiring: Black(Line), White(Neutral), Green(Ground), Purple(Dim+), Pink(Dim-), Blue(-), Red(+)
- Dimming Compatibility: 0-10v IEC compliant control
- Features: CCT Switch, Lumens Switch, Field-Adjustable Wattage & CCT
Wall Mounting
- Remove Lens Cover screws.
- Locate wall mounting anchors and make electrical connections (refer to wiring diagram).
- Secure the luminaire body to the wall on a junction box or over a junction box.
- Close luminaire Lens Cover.
Ceiling Mounting
- Remove Lens Cover screws.
- Locate ceiling mounting anchors and make electrical connections (refer to wiring diagram).
- Secure the luminaire body to the ceiling on a junction box or over a junction box.
- Close luminaire Lens Cover.
Installation Instruction
WARNING
- To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- Commercial installation, service, and maintenance of luminaires should be performed by a qualified licensed electrician.n
- For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation..
WARNING
- Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
- Turn off the power when you perform any maintenance.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
- All wiring connections should be capped with UL approved wire connectors.
CAUTION
- Avoid direct eye exposure to the light source while it is on.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handing fixture.
NOTICE: Green ground screw provided in proper location n.Do not relocate.
NOTICE: Minimum 90° supply conductors.
NOTICE: Specifications and dimensions subject to change without notice.
NOTICE: Suitable for Dry or Damp location
Installation Instruction
A. Wall mounting
- Remove Lens Cover screws
- Locate wall mounting anchors and make electrical connections (see wiring diagram)
- Secure the luminaire body to the wall on a junction box or over a junction box.
- Close luminaire Lens Cover.
B. Ceiling mounting
- Remove Lens Cover screws.
- Locate ceiling mounting anchors and make electrical connections (see wiring diagram).
- Secure the luminaire body to the ceiling on a junction box or over a junction box.
- Close luminaire lens cover.
FAQs
Q: How do I adjust the CCT (Correlated Color Temperature) on the luminaire?
A: Use the CCT Switch provided on the luminaire to adjust the color temperature to your preference.
Q: Can I dim the luminaire brightness?
A: Yes, you can dim the luminaire using a 0-10v IEC compliant control by connecting the Dim+ and Dim- wires as per the wiring diagram.
Q: What is the purpose of the purple and pink wires in the wiring diagram?
A: The purple wire is for Dim+ and the pink wire is for Dim-, which are used for dimming functionality of the luminaire.
Documents / Resources
 |
e-conolight C-SW-B Series LED Stairwell Light with Emergency Battery Backup [pdf] Installation Guide C-SW-B Series LED Stairwell Light with Emergency Battery Backup, C-SW-B Series, LED Stairwell Light with Emergency Battery Backup, Light with Emergency Battery Backup, Emergency Battery Backup, Battery Backup |