D3K WIFI Module
“
Product Specifications
Trace Layout and Dimensions
- Layout of trace design, parts, antenna, connectors, and
isolation requirements. - Boundary limits of size, thickness, length, width, shape(s),
dielectric contain, and impedance must be clearly described for
each type of antenna.
PCB Antenna Trace Antenna Dimension
Note: RF trace between module RF pinout to antenna width is
0.22mm. RF trace between module and antenna impedance is 50ohm.
IPEX Connector Information
- Size: Connector 1 IPEX Male 50 pin
- Surface mount varies
Appropriate Parts of Manufacturers and Specifications
- Information about devices on RF lines.
| Parts Number | Size |
|---|---|
| Tuning 1/0 | 0201 |
If customers completely refer to our antenna design for their
own design, the antenna performance should also be the same as
ours.
Product Usage Instructions
Test Procedures and Design Verifications
Production test procedures for ensuring compliance.
Frequently Asked Questions (FAQ)
Q: How do I ensure proper antenna performance?
A: Make sure the RF trace width between module RF pinout and
antenna is 0.22mm and the impedance between module and antenna is
50ohm as specified.
“`
User manual Supplementary information
a) Trace layout and dimensions including specific designs for each type: 1. Layout of trace design, parts, antenna, connectors, and isolation requirements:
2. Boundary limits of size, thickness, length, width, shape(s), dielectric contain, and impedance must be clearly described for each type of antenna:
PCB Antenna trace antenna Dimension:
Note: 1. RF trace between module RF pinout to antenna width is 0.22mm. 2. RF trace between module and antenna impedance is 50ohm.
IPEX connector information: Size:
Connector 1 IPEX Male 50 pin
Surface mount varies
b) Appropriate parts of manufacturers and specifications:
Information about devices on RF lines:
Parts list
Parts number Size
Tuning 1/0
/
0201
Manufacturer varies
If customers completely refer to our antenna design for their own design, the antenna performance should also be the same as ours.
C) Test procedures and design verifications:
d) Production test procedures for ensuring compliance
Documents / Resources
 |
Dzees D3K WIFI Module [pdf] User Manual D3K WIFI Module, D3K, WIFI Module, Module |