Dyness T7 Tower User Guide

Dyness-LOGO

Dyness T7 Tower

Dyness-T7-Tower-PRODUCT

Specifications

  • Models: Tower T7, Tower T10, Tower T14, Tower T17, Tower T21
  • Warranty Period: 5 years
  • Capacity Maintenance: 70% for 10 years
  • Temperature Range: 25~30°C

Product Usage Instructions

Warranty Terms:
The warranty period starts from the date of installation or 180 days after shipment, lasting for 5 years. Self-discharging degradation is covered within 180 days after ex-work.

Performance Warranty:
The product maintains 70% of Nominal Energy for 10 years or reaches the Minimum Energy Throughput first, as specified in the table provided. Ambient temperature and charging/discharging methods are crucial for capacity measurement.

Charging/Discharging Method:

Product Type Charging Discharging
Tower T7 0.2 CC/CV (219 V) 0.2 CC (168 V)
Tower T10 0.2 CC/CV (328.5 V) 0.2 CC (252 V)
Tower T14 0.2 CC/CV (438 V) 0.2 CC (336 V)
Tower T17 0.2 CC/CV (547.5 V) 0.2 CC (420 V)
Tower T21 0.2 CC/CV (657 V) 0.2 CC (504 V)

Technical Parameters

 
Module Number 2 3 4 5 6
Nominal Capacity 37Ah 37Ah 37Ah 37Ah 37Ah
Nominal Battery Energy 7.10kWh 10.66kWh 14.21kWh 17.76kWh 21.31kWh
Nominal Voltage

Maximum Continuous Discharge Power 121

Maximum Continuous Charge Power121

 

Dimension[W*D*H]

192V               288V               384V               480V

 

4.26kW            6.39kW            8.52kW           10.65kW

 

 

4.26kW            6.39kW            8.52kW           10.65kW

 

504*380*700 504*380*900 504*380*1100 504*380*1300

mm                 mm                 mm                 mm

576V
 

12.78kW

 

12.78kW

504*380*1500

mm

Net Weight 105kg 146kg 187kg 228kg 269kg
Depth of Discharge 100%
Charging Temp. Range 0~50°(
Discharging Temp. Range -10~50°(
Communication CAN
Warranty 10 Years
Warranty Document Supplied  

Yes

Calendar Life 111 ;;:6000 Cycles
Protection Level IP54
Color White
Alarms                             Overcharge/Overdischarge/Overcurrent/Overtemperature/Short Circuit
Pros Can be used in both off-grid and hybrid setups, compact design, modular expansion
Battery Module Type HV9637
Module Connection Method Series
Compatible Inverters Goodwe/Solis/Hoymiles/Sermatec/ATESS/Sinexcel/Luxpower/ Sunways, more brands will be announced
Certification TUV/CE/IEC62619/IEC 62040/UN38.3/CEC Accredited/UL 1973

Features and Advantages

Dyness-T7-Tower-FIG-1

WARRANTY TERMS

After-sales service and Limited warranty letters

End User Definition
End User (hereinafter “Buyer”) is the buyer who puts the Products into operation for the first time via the way authorized by Dyness.

Authorized Seller
Authorized Seller is the Agents, Distributors, Partners, etc. authorized by Dyness.

Purpose

  • The primary purpose of Limited warranty letters part is to clearly define the matters related to warranty policy of Products.
  • The primary purpose of After-sales service part is to clearly define the matters related to precautions for use of Products.

Applicable products
Tower T7 / Tower T10 / Tower T14 / Tower T17 / Tower T21 Dyness warrants to the End User as follows:

Product Warranty: Warranty start date definition
The Warranty Period shall commence from the earlier date of the following:

  1. The date of when the first installation of the warranted product is completed
  2. 180 days after the date of shipment from Dyness Digital Energy Technology Co., LTD.

Warranty Period
The Products warranty period is ten (10) years from the warranty start date. Buyer can download the “Dyness” app in the mobile phone store and register it, and the end user can check the battery warranty status at any time. Dyness warrants that the Product will be free from defects in materials or workmanship for ten (10) years from Warranty Start Date, subject to the exclusions and limitations set out below. This Warranty covers a capacity equivalent to 1 full cycle per day.

Full cycle: Discharge the nominal capacity of a fully charged battery and fully charge it afterwards. Micro cycles sum up to full cycles according to amount of energy charged and discharged.

Note. Products are unavailable to protect itself from the deep discharge/charging in condition of without communication connection.

Products used without communications, or when used in mobile vehicles such as recreational vehicle (RV), or camp and marine applications, the warranty period is five (5) years from the warranty start date. Regarding self-discharging degradation, 180 days after ex-work is ensured.

Performance Warranty: Capacity performance warranty
Dyness warrants that the Products maintain seventy percent (70%) of the Nominal Energy for ten (10) years from the warranty start date or a Minimum Energy Throughput calculated from the warranty start date, whichever occurs first. The Nominal Energy and Minimum Energy throughput for each Product Model are set out in the table below. The term “Nominal Energy” herein means the initial nominal Energy of the products as printed on the label of Products. The preconditions of the valid 10-year Performance Warranty shall be followed in accordance with Appendix 1 Usage and Transportation requirements.

Table 4-1 Product Energy

Product Type Nominal Energy (kWh) Minimum Energy Throughput (MWh)
Tower T7 7.10 20.92
Tower T10 10.66 31.41
Tower T14 14.20 41.85
Tower T17 17.76 52.34
Tower T21 21.31 62.80

Capacity measurement condition

  • Ambient temperature: 25~30oC
  • Initial battery temperature from BMS: 25~30oC

Charging/discharging method
Table 4-2 Charging/Discharging method

Product Type Charge (CC/CV) Constant Voltage (V) Cut-off Current (C) Discharge (CC) Cut-off Voltage (V) Discharge Current (C)
Tower T7 0.2 219 0.05 0.2 168 0.2
Tower T10 0.2 328.5 0.05 0.2 252 0.2
Tower T14 0.2 438 0.05 0.2 336 0.2
Tower T17 0.2 547.5 0.05 0.2 420 0.2
Tower T21 0.2 657 0.05 0.2 504 0.2

Note. Current and voltage measurement at battery DC side

Exclusion of Warranty
Damage to the Products resulting from any of following activities is not covered by this Limited Warranty:

  1. Without payment to the Seller, the Buyer may pay the unpaid amount to the Seller in support of the warranty claim under the circumstances that the Seller has the right to refuse the warranty request in accordance with this clause.
  2. Not complying with Dyness’s official user manual of the product and “Appendix 1 – Usage and Transportation requirements”.
  3. Product damage caused by modification, alteration, disassembly, repair or replace maintenance and other services conducted by personnel unauthorized by Dyness.
  4. Damage or defect arise due to the buyer’s unauthorized use of his own design, materials, mixed, function changed or service to the Products.
  5. Product damage and defect caused by buyer’s improper use, mixed-use, misuse, abuse, which non-conforming with User Manual.
  6. Appearance damage, deformation, abrasion, stain, rust, mildew, or similar external influences caused by the buyer during use.
  7. Improper transportation, storage, installation, wiring and use with faulty or incompatible devices by Buyer. If Buyer fails to use the original packaging materials provided by Seller during the transportation of the equipment, the Products damage or failure shall not fall under the warranty scope of the product.
  8. The model number, nameplate or product serial number of the product has been altered, erased or unrecognizable or the tamper-evident logo has been arbitrarily damaged.
  9. Products suffered any external influences including unusual physical, natural force, electrical stress (power failure surges, inrush current, lightning, flood, fire, accidental breakage, etc.)
  10. Product damage caused by external force, force majeure (causes of natural disasters such as unforeseeable, unavoidable and insurmountable objective events, including but not limited to war, civil war, strike, riot or other activities intervened by government, terrorism, war, riots, strikes, unavailability of suitable and sufficient labor or materials and other events which are out of control of Dyness) or other third party.
  11. Removal and reinstallation at another place from the original installation without the written confirmation from Dyness.
  12. Damage of Products arise due to renewal of the national or regional laws or regulations.
  13. Product damage and defect caused by End User deliberately or by willful act.
  14. Use of an incompatible inverter, rectifier or PCS.
  15. Products failure is not reported to Seller or Dyness Authorized Service Partner within 2 weeks of appearance.
  16. Purchase and installation of the Product in an area other than the local area..
  17. Warranty period specified above has already expired.

About Service Products/Parts
Fault Handling

  1.  If the product fails, the Buyer shall cooperate with the Seller to obtain the faulty equipment usage information, including but not limited to: faulty equipment serial number, working temperature, usage mode, supporting energy storage inverter manufacturer/model/specification, power consumption equipment power information, PV system configuration information, fault phenomena, operating procedures, battery operation logs, etc.
  2. When both parties agree that the product belongs to the warranty scope, Dyness or Dyness authorized sellers can repair or replace the non-conforming products or parts. Before repairing or replacing the non-conforming products, the Buyers shall confirm with the Dyness or Dyness authorized sellers in writing and provide the serial number of the failure equipment and the serial number of the spare parts to be installed in time. The warranty period of the replacement product shall follow the remainder of the original product warranty period.
  3. If the two parties disagree with whether the faulty equipment meets the warranty conditions, the products may be tested jointly by the ways approved by both parties, or the products shall be submitted to the third-party testing institutions recognized by both parties. Both parties can provide reasonable opinions on the test methods, basis and conclusions. The testing fee shall be borne by the Buyer first. If the testing result proves that the product meets the warranty conditions, the Seller shall pay the transportation fee and testing fee generated in full to the Buyer, and assume the responsibility for the faulty equipment warranty.

Out of Warranty
If the product is out of warranty or not covered by the warranty, Dyness may (in its discretion) provide certain after-sales service to Original Buyer, but all the costs and expenses, such as parts, labour costs and travel expenses, shall be borne by Original Buyer,Please refer to the after-sales service policy document for details.

Claim payment policy

  • Dyness reserves the rights to refuse product warranty claim for lacking proper documentation and information.
  • Claims under this Warranty must be made by notifying the Seller from whom Products was purchased within 2 weeks of defects’ appearance.

For a Warranty Claim to be processed, it must include but not limited following items:

  1. Proof of the original
  2. Description of the alleged defect(s) from authorized service center
  3. The relevant Product’s serial number and the start date of the warranty

Buyers who are unable to contact the Seller from whom Product was purchased should contact Dyness Digital Energy Technology Co., LTD. at the Contact Us Section of the

Applicable Law
The Warranty is subject to the local legislation and regulations. The certified which is excluded in the English language shall prevail in the event of conflict between the English version and the translated Chinese version. The company reserves all rights for the final explanation of the warranty terms.

Usage and Transportation requirements
This product includes Lithium iron phosphate battery and the Accessory Components. In order to ensure that the buyer is entitled to full warranty policy, the following clauses should be strictly observed in the transportation and use of products. The product failure or damage caused by violation of the following requirements is not covered by this Limited Warranty.

Operating environment requirements

  • Working temperature:-10~55 oC
  • Working humidity: 5%~95% RH
  • Altitude: <4000m
  • No conductive dust and corrosive gas
  • Installation location should be away from the sea to avoid brine and high humidity environment.
  • The ground is flat and level.
  • There is no flammable explosive near to the installation places.
  • Keep away from dust and messy zones, water source and heat source, prevent equipment from entering water and overheating.

Storage environment requirements

  • Short-term storage environment:
    • Within 3 months of temperature range is -20~40oC.
    • Relative humidity <85%RH.
    • No corrosive gases.
  • More than 3 months long-term storage environment:
    • temperature range for -10~35oC
    • Relative humidity <65% RH No corrosive gases
  • If long-term storage is required, it should be recharged every 6 months, and no less than 80% of SOC should be charged.
  • Keep away from dust and messy zones, water source and heat source, prevent equipment from entering water and overheating.

Transportation requirements

  1. When the product is transported separately, the individual products should be transported with the original packaging materials of the Seller. If longdistance transportation such as sea transportation is required, additional packaging measures should be taken to ensure the safety of transportation. The product stack in transportation does not exceed 6 layers.
  2. If the product does not use Seller’s original packaging material transportation, Buyer shall fully consider the risks of vibration, drop and collision in the transportation process, and adopt adequate product protection measures.

Equipment installation requirements

Step Category Instructions/Details
1 Visual Inspection – Check for damage in appearance.
– Verify attachment variety and quantity per packing list.
– Ensure the device is in the off state.
2 Electrical Specification Confirmation – Confirm the rated working voltage of each energy storage PACK is 96V.
– Ensure battery power interface parameters match the storage inverter.
– Confirm maximum charging/discharging current meets system specifications.
– Ensure external power supply avoids surge damage to battery or BMS.
3 Connection – Ensure proper polarity (positive/negative electrode); avoid reverse connection and short circuits.
– Do not connect the battery directly to AC power.
– Use single battery modules in series only; clusters must be in parallel.
– Do not mix batteries from different factories or types.
– Ensure reliable grounding with resistance < 1 Ω.

Equipment Use

Step Category Instructions/Details
1 Charging – Max continuous charging current ≤ 0.6C.
– Charge within 48 hours if the battery is over-discharged.
2 Discharging – Max continuous discharging current ≤ 0.6C.
– Max depth of discharge (DOD) ≤ 95%.
3 Cycles – Warranty covers 1 full cycle/day for 10 years.
– Full cycle: Discharge and fully recharge. Micro cycles sum to full cycles.
4 Move – Disconnect external power supply and switch off before removing the battery.
5 Maintain – Do not open or dismantle the battery without written authorization from the seller.
6 Fire Emergency – Use only dry powder fire extinguishers in case of emergency.

Table 1. The preconditions of the valid 10-year Performance Warranty

 

 

Product model

 

 

Warranty period

 

Minimum throughput MWh

Preconditions
Long-term max continuous charging

current

Long-term max continuous discharging

current

Depth of discharge Cycles
 

Tower T7

10 years 70%SOH  

20.92

 

≤0.6C

 

≤0.6C

 

≤95%

1 full cycle/

day

 

Tower T10

10 years 70%SOH  

31.41

 

≤0.6C

 

≤0.6C

 

≤95%

1 full cycle/

day

 

Tower T14

10 years 70%SOH  

41.85

 

≤0.6C

 

≤0.6C

 

≤95%

1 full

cycle/ day

 

Tower T17

10 years 70%SOH  

52.34

 

≤0.6C

 

≤0.6C

 

≤95%

1 full

cycle/ day

 

Tower T21

10 years 70%SOH  

62.8

 

≤0.6C

 

≤0.6C

 

≤95%

1 full cycle/

day

  1. Other preconditions of the product’s valid 10-year Performance Warranty shall be followed by Appendix 1 -Usage and Transportation requirements.It is possible to use the product for more than 1 full cycle per day by end users. However, when the battery is used at full load for more than one full cycle continuously, the intervals of each full cycle must be more than two hours to avoid possible unexpected high battery temperatures which affect the battery’s cycle life.
  2. In the conditions of 25oC, 80%DOD, 0.2C charging/discharging, the product can achieve 6000 cycles.

Dyness Digital Energy Technology Co., Ltd.

  • Sales tel: +86 400 666 0655
  • Service tel: +31 10 30 717 52
  • Add: Plant 5, No. 688 Liupu Road, Guoxiang Street, Wuzhong Economic Development Zone, Suzhou City, Discover Your Nature

FAQ

Q: What is the warranty period for Dyness Lithium Iron Phosphate Batteries?
A: The warranty period is 5 years from the date of installation or 180 days after shipment.

Q: How long does the product maintain its capacity performance?
A: The product maintains 70% of Nominal Energy for 10 years or reaches the Minimum Energy Throughput first.

Q: What are the recommended charging and discharging methods for each product type?
A: Refer to the provided table for the specific charging and discharging methods for each Tower model.

Documents / Resources

PDF thumbnailT7 Tower
User Guide · T7 Tower, T7, Tower

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.