Dynaudio Xeo 2 Wireless Bookshelf Speakers
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. USA and Canada only: A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
- If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
- To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.
- The mains plug of the power supply cord shall remain readily operable.
Unpacking
After unpacking, make sure the system is complete and check the device and all accessories for transport damage. Transport damage may be expected if the packaging is already severely harmed. Do not attempt to start up a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio Xeo distributor. Distributor addresses can be found on the Internet at www.dynaudio.com.
Removing the protection cap
The tweeter is protected by a cap to prevent damage during transport and unpacking. After you have unpacked the speaker, remove the cap by just pulling it straight out.
Packaging material
The packaging has been designed so that it may be reused as long as it has not been damaged during transport. Keep the packaging and use the original packaging for all further transport.
Disposal
Disposal of used electrical and electronic equipment (applicable in European countries with separate collection systems for this equipment) This symbol on the product or its packaging indicates that the product must not be treated as household waste. Instead, it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The recycling of materials helps to conserve natural resources. For more detailed information on recycling this product, please contact your local authority, community waste disposal office, or the shop where you purchased the product.
Scope of delivery
- 2 Xeo 2 speakers
- 2 Xeo 2 speaker cloth covers
- 1 Xeo 2 remote control
- 2 power cables (country-specific version, length: 2.5 m)
- 1 stereo cable (RCA – RCA, length: 1.5 m)
- 1 optical cable (Toslink – Toslink, length: 1.5 m)
- 1 stereo cable mini jack (3.5 mm – 3.5 mm, length: 1.5 m)
- 1 Xeo first time setup manual (quick guide for installation, not shown).
Connections and control elements
This section describes the connections and control elements. Please contact your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor addresses can be found in the Internet at www.dynaudio.com
Elements on the rear panel
Buttons on top of the cabinet
Remote control
Status LEDs on the front
Malfunctions
Interruptions, clicking noises, or other audible interference when playing music is usually not caused by radio transmission in the Xeo system. Often, other external causes influence the transmission quality. Below are a few tips for improving transmission quality:
- Position all radio transmitters and receivers away from each other. WLAN devices, radio receivers, and radio systems may influence each other if they are too close together. Test out various locations for each device.
- Switch off the automatic search function in WLAN devices. WLAN devices and other radio systems permanently scan for available frequencies, thus sending signals that could disrupt other radio systems. This automatic search function can usually be switched off.
- Xeo technology radio signals can, of course, transmit through walls. However, walls may consist of very different materials, such as wood fiberboard, stone, or even steel.
- The walls may also contain complex cable installations for electrics, phones, TVs, and radios, as well as water pipes and air shafts. These can divert radio signals. This is why you should test different locations for the Xeo Hub, Extender, and Link and favor the most direct radio path between the Xeo components.
- Some electrical devices, such as microwaves, generate strong electromagnetic fields that could disrupt radio systems. Do not operate such electrical devices near Xeo components. You can ask your Dynaudio Xeo distributor for assistance at any time. Or go to www.dynaudio.com/support to read the FAQ or to contact the Customer
- Support Team. Further information can also be found on the Xeo website at www.dynaudio.com/xeo
Technical data
| Frequency response (± 3 dB) | 40 Hz – 24 kHz |
| Box principle | Bass reflex (rear ported) |
| Crossover | 2-way (DSP based) |
| Crossover frequency | 3100 Hz |
| Crossover slope | 24 dB/Octave (DSP based) |
| Woofer | 14 cm MSP |
| Tweeter | 27 mm soft dome |
| Woofer amplifier power | 65 W |
| Tweeter amplifier power | 65 W |
| AC power input | 100 – 240 V, 50/60 Hz |
| Power consumption during operation | 6 – 100 W |
| Power consumption in standby | 1.2 W (with active network)
< 0.5 W (wireless network disabled) |
| Weight | 4 kg / 8.8 lbs |
| Dimensions (W x H x D) | 173 x 255 x 154 mm / 6.8 x 10 x 6.1″ |
| Digital audio in | Toslink (up to 24 bit/192 kHz) |
| Analog audio in | RCA, mini jack (3.5 mm) |
| Wireless | Bluetooth, Hub (16 bit/48 kHz), Connect (16 bit/48 kHz and 24 bit/96 kHz) |
| USB | For service only |
Connection options
| Your signal source | Signal source output | Xeo 2 input* | Cable
(source – Xeo 2) |
Notes |
| Notebook, Mac™, PC | Optical* | Optical In | Toslink – Toslink | * If available |
| Line out | Line in | RCA – RCA | ||
| Headphones | Aux in | Jack 3.5 mm – 3.5 mm | ||
| Smartphone, other portable devices | Headphones | Aux in | Jack 3.5 mm – 3.5 mm | – |
| Astell&Kern | Headphones | Aux in | Jack 3.5 mm – 3.5 mm | – |
| Optical | Optical In | Toslink – Toslink | ||
| PonoPlayer | Jack | Aux in | Jack 3.5 mm – 3.5 mm | – |
| Docking station, network client, Sonos, Bluesound, etc. | Line out | Line in | RCA – RCA | * If available |
| Optical* | Optical In | Toslink – Toslink | ||
| Google Chromecast Audio | Line out | Aux in | Jack 3.5 mm – 3.5 mm | Select a variant. |
| Optical | Optical In | Mini Toslink – Toslink | ||
| Apple AirPort Express | Optical | Optical In | Mini Toslink – Toslink | – |
| Apple TV* | Optical | Optical In | Toslink – Toslink | * up to 3rd generation |
| Hard disk, network player, CD player | Line out | Line in | RCA – RCA | * If available |
| Optical* | Optical In | Toslink – Toslink | ||
| Analog radio, digital radio | Line out | Line in | RCA – RCA | * If available |
| Optical* | Optical In | Toslink – Toslink | ||
| Analog record player | Line out* | Line in | RCA – RCA | * On phono preamplifier |
| Your signal source | Signal source output | Xeo 2 input* | Cable
(source – Xeo 2) |
Notes |
| TV | Headphones | Aux in | Jack 3.5 mm – 3.5 mm | Select a variant. |
| Line out | Line in | RCA – RCA | ||
| Optical* | Optical In | Toslink – Toslink | * If available | |
| Stereo preamplifier | Pre-out, main out | Line in | RCA – RCA | – |
| Stereo power amplifier | Tape out | Line in | RCA – RCA | * Disconnect bridge |
| Pre-out, main out* | Line in | RCA – RCA | ||
| Second pre-out | Line in | RCA – RCA | ||
| Subwoofer | Analog output | Line in | RCA – RCA | – |
| AV receiver, AV processor | Optical | Optical In | Toslink – Toslink | – |
| Pre-out, main out | Line in | RCA – RCA |
Division into audio zones
The Xeo system
Xeo consists of several high-quality components that are optimally matched. When combined, they can fulfill the most demanding requirements for a wireless multi-room and multi-source system
| Xeo speakers | The active Xeo speakers Xeo 2, Xeo 4, and Xeo 6 receive the wireless signals from the Hub or Connect and play them back in optimal sound quality. In addition, the Xeo 2 can be connected directly to various audio sources. All speakers have an integrated amplifier and can be controlled with a remote control. Display elements indicate the operating state of the system and controls on the cabinet let you switch it on/off or change the volume without using the remote control. |
| Xeo remote control | The Xeo remote control can be used to turn the speakers on and off, change the volume, and select a Hub or Connect and its connected signal sources. |
| Dynaudio Connect and Xeo Hub | The Dynaudio Connect and Xeo Hub are the control centers for the Xeo system. Both offer a new level of wireless connectivity and convenience. Signal sources such as tuners, receivers, CD players, TVs, streaming clients, network players, MP3 players, or computers are connected to them. Signals are sent wirelessly and lossless to the connected Xeo or Focus XD speakers (or Xeo Link) where they are then played back. |
| Xeo Extender | The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo speakers or other Xeo components can be operated further away from the Xeo Hub or Dynaudio Connect. |
| Xeo Link | The Xeo Link receives wireless signals from a Xeo Hub or Dynaudio Connect and outputs analog and digital signals from its connections. As a result, you can also connect active subwoofers, active speakers, or other components to the Xeo system. Xeo Link can also be connected with a 1st generation Xeo Hub (transmitter). |
IC NOTICE
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
MPE Reminding
This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body.
- The device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
- The maximum antenna gain permitted for devices in the bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the e.i.r.p. limit; and
- The maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Contact us
Dynaudio A/S, 8660 Skanderborg, Denmark Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 4108 – 41 80 – 0 www.dynaudio.com
FAQS
The World Wide Stereo website specs state 6.1″ deep. Dynaudio website states 6.1″ without grill, 6.5″ with grill.
Mostly software. That might be important and will be if you are concerned about merging with another Dynaudio product as the connectivity of the 2’s are limited. I intended to run mine at the higher bandwidth,
No, but I wish there was an option to do this. Mine were less than 4 feet apart and would constantly lose connection
These are sold as pairs. If you were to somehow get only one, be sure it’s the “master” unit and not the “slave.”
Yes it does. 50/60hz
There are 3 separate/switchable Bluetooth inputs
The Xeo 2 ($699.99) and the TUK ($799.99) are quite comparable and both are from respected speaker manufacturers. Even given the price difference it is difficult to say that one is “better” than the other.
No. It must be purchased separately.
These could work as personal/near field speakers. They are a little too big to be right on the desk, on either side of your laptop
They are made in Denmark. Terrific little speakers! Well built and sound amazing!
The Bluetooth is reliably flaky. If that’s going to be your primary way to listen and you’re easily frustrated you may consider something else.
The XEO 2 is the smallest and also the least expensive. In my case space was an issue
The spec sheet under legacy products on the dynaudio site says 100-240 50/60hz
The speakers are 65 watts each side and so well matched to the speakers themselves that they get very loud and will fill a large room with extraordinary sound quality. World Wide Stereo is 39 years old and a proud authorized Dynaudio dealer.
4 is larger than the 2, not sure about the 20.
