Dwyer - logoSERIES SSCS | SURE-SET CURRENT SWITCHDwyer SSCS Series Sure Set Current Switch - cover

BENEFITS/FEATURES

  • Models for 230 VAC or 480 VAC applications
  • Low and high motor HP ranges available
  • 9 pre-set HP set points for faster installation

APPLICATIONS

  • BAS
  • HVAC
  • Industrial motors

DESCRIPTION

The Series SSCS Sure-Set Current Switch provides a unique approach to calibration and installing current sensors in a low cost, fast, and accurate design. Selecting the set point has never been easier, with each model having 9 pre-configured adjustable HP set points. This feature eliminates the need to work within a live enclosure, reducing the risk of arc flash on installation.

SPECIFICATIONS

Output Isolated, NO.
Power Requirements None, self-powered.
Temperature Limits 5 to 140°F (-15 to 60°C).
Humidity Limits 0 to 95%, non-condensing.
Isolation Voltage 600 VAC RMS.
Frequency 50/60 Hz.
Enclosure Rating UL 94 V-0 flammability rated, ABS plastic housing.
Compliance CE, cULus.

DIMENSIONS

Dwyer SSCS Series Sure Set Current Switch - DIMENSIONS 1

HOW TO ORDER

Use the bold characters from the chart below to construct a product code.

Dwyer SSCS Series Sure Set Current Switch - HOW TO ORDER

Important Notice: Dwyer Instruments, LLC reserves the right to make changes to or discontinue any product or service identified in this publication without notice. Dwyer advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current.

ORDER ONLINE TODAY!
dwyer-inst.comDwyer SSCS Series Sure Set Current Switch - icon 1DWYER INSTRUMENTS, LLC
DS-SSCS Rev. 1
©Copyright 2023 Dwyer Instruments, LLC
Printed in U.S.A. 8/23

Documents / Resources

Dwyer SSCS Series Sure Set Current Switch [pdf] User Guide
SSCS Series Sure Set Current Switch, SSCS Series, Sure Set Current Switch, Current Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *