Interface
- Power ON/OFF button
- Display
- USB 2.0 host
- HDD rack (3.5″ SATA)
- 2 x Wi-Fi antenna connectors
- Kensington security slot
- Hi-Fi I2S-E (RJ45) output
- Hi-Fi coaxial S/PDIF output
- USB 3.0 (low noise, recommended for audio out to external USB DAC)
- 2 x USB 3.0 host
- Analog stereo audio output
- Coaxial S/PDIF output
- Bluetooth antenna
- Restore button
- IR input (3.5mm minijack, T-R-S: 5V-IR-GND, L=14.5mm)
- Optical S/PDIF output
- HDMI 2.1a output
- Ethernet 10/100/1000
- Ground connector
- 110-120V/220-240V AC input
- Power ON/OFF switch
Package content
- Dune HD player
- 4 x Power cord (EU, US, UK, AU plugs)
- HDMI cable
- 2 x Wi-Fi antennas
- IR extender (for IR input)
- Remote control
- 2 x AAA batteries
- Quick start guide
- 2 x 19″ rack nounting brackets
- Set of screws for 19″ rack mounting brackets
Installation
- Connect your Dune HD Player to TV by HDMI-cable
- Use Ethernet-cable (not included) to connect Dune HD player to the Internet (or use Wi-Fi)
- Turn on the Dune HD player and TV. Choose the proper input on the TV.
Remote
Remote must be paired to the player via Bluetooth before use:
- Direct remote to the player and press any button on the remote. The remote and the player will pair automatically.
- If the remote was already paired before, or in case of any problems: press and hold the “ENTER” and “V+” buttons on the remote for 3 seconds to put the remote into pairing mode. Use “Setup” / “System”/”Remotes & accessories” menu to unpair and pair the remote again.
- POWER-turn the player on/off.
- TV section (TV DOWN, TV UP, OK, I, SET, TV INPUT, TV POWER) – learnable buttons to control TV or other equipment (see “Using Remote to Control TV” section).
- SETUP, MODE control the playback and some other player functions.
- MOUSE-toggle mouse mode (air mouse).
- FAV1 “Recent” menu or user-defined function.
- FAV2 “Favorites” menu or user-defined function.
- MIC microphone/search.
- Arrows (
), ENTER, RETURN, TOP MENU, POP UP MENU, INFO main buttons for controlling the player (navigate across the items on the screen, open/use the currently selected item, go back to the previous screen, go to the main menu, show/hide popup menu with actions for the currently selected item or the current player state, show/hide information about the currently selected item or the current player state, control some other player functions). - MUTE-turn the sound on/off.
- ►|| PLAY/PAUSE, STOP-control the playback and some other player functions.
- V+/V- (volume up/volume down) – adjust the volume.
- P+/P- (page up/page down) – scroll up and down in various lists, switch to the next/previous TV channel, control some other player functions.
- AUDIO (AUD), SUBTITLE (SUB) – toggle audio tracks and subtitle tracks.
- 0-9-enter numbers and text; control some other player functions.
- CLEAR-delete the last entered character, delete the currently selected item, control some other player functions.
- SELECT-switch text input mode, add the item to the selection list, control some other player functions.
- A (Red), B (Green), C (Yellow), D (Blue) – control various player functions.
NOTE: Button support and functions depend on particular applications. Not all apps support all buttons.
Learning remote control
You can program 6 learnable buttons (located in “TV”: section: “TV DOWN”, “TV UP”, “OK”, “T”, “SET”, “TV INPUT”, “TV POWER”) to control your TV or other equipment:
- Press and hold the “SET” button on the remote for 3 seconds.
- Press one of 6 learnable buttons on the remote.
- Place your remote and the other remote on a table so that the IR emitters of both remotes are directed towards each other and are at a distance of about 1 cm.
- Press and hold a button on the other remote until the LED indicator on your remote stops blinking. This means that the button learning is complete.
- Learn other buttons the same way if needed (repeat steps 2-4).
Key combinations (hold for 3 sec): Pair: ENTER +V+; Unpair, IR mode: ENTER + V-; BackLight off/33%/66%/100%: SET + 0/1/2/3
Reset Remote to Factory Defaults: Press and hold “ENTER” and “TOP MENU” buttons on the remote for 3 seconds.
HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Documents / Resources
 |
DUNE HD Max 8K Network Player [pdf] User Guide Max 8K Network Player, 8K Network Player, Network Player, Player |