Ducky One 3
Non-backlit
Model: DKON2108 / DKON2187
DKON2108 Fuji Mechanical Keyboard
- Type: Mechanical Keyboard
- Switch: Switches
- Keycap Material: PBT or ABS
- Printing Method: Double-Shot or Laser engraved or Dye-Sublimation
- Origin Of Production: Taiwan
Full size
- Size: 450 x 140 x 40 mm
- Weight: 1250g
Tenkeyless
- Size: 370 x 140 x 40 mm
- Weight: 950g
For more information on the specs and details of our keyboards, please contact the distributor for your region.
RGB LED
Model: DKON2108ST / DKON2187ST
- Type: Mechanical Keyboard
- Switch: RGB Switches
- Keycap Material: PBT or ABS
- Printing Method: Double-Shot or Laser engraved
- Origin Of Production: Taiwan
Full size
- Size: 450 x 140 x 40 mm
- Weight: 1250g
Tenkeyless
- Size: 370 x 140 x 40 mm
- Weight: 950g
For more information on the specs and details of our keyboards, please contact the distributor for your region.
RGB LED Backlit Modes
Fn+F10
| First Mode: 100% Full Backlit Mode |  Seventh Mode: Reactive Mode |
| Second Mode: Wave mode (Default) | Eighth Mode: Halo Mode |
| Third Mode: Color Cycle Mode | Ninth Mode: Breathe Mode |
| Fourth Mode: Rain Drop Mode | Tenth Mode: Radar Mode |
| Fifth Mode: Ripple Mode | Eleventh Mode: Laser Mode |
| Sixth Mode: Rainbow Reactive Mode | Twelfth Mode: Backlit OFF |
- All above modes can be adjusted with the following key sequence:
◆ Fn + ←: Decrease speed
◆ Fn + →: Increase speed - Hold Fn + F10 for 3 seconds to turn off all backlit (including CM1 and CM2).
- Only the backlit modes with can be adjusted using the following:
◆ Fn + F5: Adjust Color Red (R) brightness. 10 Levels.
◆ Fn + F6: Adjust Color Green (G) brightness. 10 Levels.
◆ Fn + F7: Adjust Color Blue (B) brightness. 10 Levels.
◆ Fn + F8: Erase Red, Green and Blue color setting.
◆ Fn + Spacebar (Color Palette): Activate Color Palette to display various different colors, press on the desired color, all the keys will automatically change to match.
RGB LED Zone Customization Modes
| Fn + F11 | CM1 Cycle: First Step: Turn on user’s customized zone and color. Second Step: Turn off CM1. |
| Fn + F12 | CM2 Cycle: First Step: Turn on user’s customized zone and color. Second Step: Turn off CM2. |
| Fn + PrtSc | REC1, recording CM1 (hold for five seconds) |
| Fn + Pause | REC2, recording CM2 (hold for five seconds) |
| CapsLock + F5 / F6 / F7 | To set up Red / Green / Blue LED Color |
| CapsLock + F8 | Erase Caps Lock light |
| Caps Lock + Spacebar | Color Palette |
| CapsLock + ScrLk | REC Over |
Recording steps
- Important: Adjust to the color first, then set the individual keys to be set to that color.
1. Press Fn + PrtSc for 5 seconds to record CM1, and Press Fn + Pause for 5 seconds to record CM2.
2. When start recording mode, Caps Lock will display the current LED color. The color can be adjusted by hitting Caps Lock + Spacebar. After setting the desired color, hitting any key on the keyboard will set that key to the selected color.
3. Repeating the above steps allows the user to set dierent colors to dierent keys. If the key has been set, Press again to cancel the setting.
4. To finish recording, Press REC Over (Caps Lock + ScrLk) function to finish recording.
The color of the Caps Lock key is the value you set.
Note:
- When starting recording mode, Caps Lock will display the last color used.
- CM1 has priority over CM2.
- Entering the recording mode will display the previously saved setting.
- If no changes are made within 30 seconds in the recording mode, the recording session will terminate without saving.
Display Mode
Hold Fn + R_Alt + R_Ctrl for 3 sec
To display various LED backlit modes
- The entire keyboard will be disabled while cycling through various RGB modes.
- Unplug the keyboard to quit Display Mode.
Note: Used for showcasing purposes.
Indicator light brightness adjustment 
| Increase brightness | Fn + Alt +↑ |
| Decrease brightness | Fn + Alt +↓ |
Reset Back to Factory Defaults
| US ANSI and EU ISO layout | Left Windows key + Right Windows key |
Note:
Hold for 3 seconds. The keyboard’s backlit will flash 3 times to indicate the keyboard have been reset.
Open / Close Windows Function (Windows Key Lock)
While DIP 1 is ON, press and hold Fn + any Alt keys + any Windows key for 3 seconds, the keyboard’s backlit will flash 3 times to indicate the keyboard that have been turned ON / OFF(The default setting is ON).
Mouse Function
ON/ OFF (default setting):
TKL, Tenkeyless →
Fn + Alt + ScrLk
Full Size →
Fn + Alt + Number Lock
Note: The corner right indicator “M” key will light up upon activation.
Mouse function diagram
DIP Switch Functions
Note : You can input the ideal VID in both situation, but the VID can be only changed when DIP 3 turned on.
DIP Switches are on the underside of your keyboard.
DIP Switches are defaulted as OFF when you receive the keyboard.
| DIP1 | OFF (Default) | ON |
| Disable Windows key Lock Function | Enable Windows key Lock Function |
| DIP2 | OFF (Default) | ON |
| NKRO Mode | 6 Key Rollover – Useful for Mac and Linux devices |
| DIP3 | OFF (Default) | ON |
| Ducky Vendor ID (VID) | User defined VID |
| DIP4 | OFF (Default) | ON |
| Right Windows key is default | Right Windows key changes to the Menu key |
Key Switch Functions
Note :
You can press Esc key to leave the switching function before starting it.
- Applicable keys: Fn/Alt/Ctrl/Windows/Caps Lock
- Operation:
● Press Fn + Alt + k for 5 seconds.
● Until the Esc, L_Ctrl, L_Win, L_Alt, R_Alt, R_Win, Fn, R_Ctrl, and Caps Lock keys are all lighting up. The colorways are respectively pink, red, orange, yellow, green, blue, indigo, purple and white.
● Except for Esc & Caps Lock key, the rest of 7 keys are able to switch each function and color at will. (2 keys max at the same time)
● Press Caps Lock once will change its own function to Fn ( turns into indigo LED color) then L_Ctrl key ( turns into red LED color) in order.
● Press Caps Lock again to resume Caps Lock (it will be illuminated White for Caps Lock).
● Press Esc key once to save and exit.
Ducky Macro V2.1
Step1. Profile Selections
| Fn+ | 1 | = | Switch to profile 1 | Factory settings (Default) |
| 2 | Switch to profile 2 | Customize Macro Key Features | ||
| 3 | Switch to profile 3 | |||
| 4 | Switch to profile 4 | |||
| 5 | Switch to profile 5 | |||
| 6 | Switch to profile 6 |
Note:
Once the profile is selected then the Caps Lock or indicator lights will blink in the amount of selected profile number.
Step2. To enter Macro recording
Press and hold Fn + Alt + Tab for 3 seconds to enter Macro recording.
Once in recording mode the Caps Lock or indicator lights will flash slowly.
Step3. Press a key to start recording Macro
Press on the key you want to use to activate Macro. The key pressed will blink (Non-backlit version will not) and the Caps Lock or indicator lights will flash swiftly.
Step4. Recording Macro
Enter any key, and choose the Macro implementation.
Step5. To exit or continuing recording
Press and hold Fn + Alt + Tab for 1 seconds to exit recording or press Fn + Alt to continue.
Ducky Macro V2.1 Setting Section
Unable to set Macro function
Fn Fn + ESC Fn + F1~F12 Fn + PrtSc Fn + ScrLk Fn + Pause Fn + 0~9 Fn + Ctrl Fn + Alt Fn + Windows Fn + ↑ ↓ ← → Fn + Space
Keys can be set to Macro (US ANSI keyboard as example)
- White keys can be set to Macro, grey keys cannot be set to Macro.
Fn Layer
- White keys can be set to Macro, grey keys cannot be set to Macro.
Ducky Macro V2.1 Multimedia Function Keys
Note : Need to be recorded first before use.
| Fn + Windows Key + Keys below | |||
| A | Mute | M | Search |
| B | Volume up | N | Previous page |
| C | Volume down | O | Next page |
| D | Play / Pause | P | Mouse Left Click |
| E | Stop | Q | Mouse Right Click |
| F | Next playlist | R | Mouse Middle Click |
| G | Previous playlist | S | Mouse Cursor Up |
| H | Calculator | T | Mouse Cursor Down |
| I | My Computer | U | Mouse Cursor Left |
| J | Browser | V | Mouse Cursor Right |
| K | W | Mouse Scroll Up | |
| L | Multimedia | X | Mouse Scroll Down |
Reset Macro setting for single profile
| US ANSI and EU ISO layout | Hold any Windows key + Spacebar for 3 seconds. |
| JP JIS layout | Hold Windows key + Spacebar for 3 seconds. |
Ducky Macro V2.1 Windows Common Function Keys
| Ctrl + C | Copy select item | Windows + D | Desktop |
| Ctrl + X | Cut select item | Windows + M | Minimized all windows |
| Ctrl + V | Paste select item | Windows + L | Lock computer or change user |
| Ctrl + Z | Undo | Windows + R | Open [Run] window |
| Ctrl + Y | Redo | Windows + F | Search files or folders |
| Ctrl + N | Open new file | Windows + ↑ | Maximized all windows |
| Ctrl + O | Open current file | Windows + ↓ | Minimized windows |
| Ctrl + S | Save file change | Windows + ← | Maximized window to the left side |
| Ctrl + P | Print file | Windows + → | Maximized window to the right side |
| Alt + F4 | Quit the software | Windows + Home | Minimized all windows other than the one used |
http://windows.microsoft.com/en-us/windows/keyboard-shortcuts
Ducky Macro V2.1 Keyboard Button Function Keys
Note:
Need to be recorded frst before use.
| Fn + Shift + Keys below | |||
| A | Prompt Profile value | N | Backlit mode : Wave mode (Default) |
| B | Profile 1 | O | Backlit mode : Color Cycle mode |
| C | Profile 2 | P | Backlit mode : Rain Drop mode |
| D | Profile 3 | Q | Backlit mode : Ripple mode |
| E | Profile 4 | R | Backlit mode : Random Reactive mode |
| F | Profile 5 | S | Backlit mode : Reactive mode |
| G | Profile 6 | T | Backlit mode : 100% Full backlit mode |
| H | Backlit modes switching | U | Backlit mode : Breathe mode |
| I | Adjust color red | V | Backlit mode : Radar mode |
| J | Adjust color green | W | Backlit mode : Backlit OFF |
| K | Adjust color blue | X | The key” . ”on number pad (Num_.) |
| L | Erase all value | Y | Number Lock |
| M | Color Palette | ||
Ducky Macro V2.1 Set Up Example
Note:
Set the Profile from Profile 2~6 before setting Macro.
Example A Configure the key “Z”to “Q” output.
Operation method：
Windows + M
Press Fn + Alt + Tab for 3 seconds → Press Z → Press down Q → Press Fn + Alt →
Press Fn + Alt + Tab for 1 secon
Example B
To set Z as show “desktop” (under Windows system)
Operation method Press In + Alt + Tab for 3 seconds — Press Z — Press Windows key + D Press In + Alt — Press In + Alt + Tab for 1 second
Example C To set In + Ctrl + M as “mute volume”
Operation method Press Fn + Alt +Tab for 3 seconds Press In + Ctrl + M Press Fn + Windows key + A —. Press Fn + Alt Press In + Alt +Tab fort second
Example D
To set In + (VI + 0 ac “Reactive mode”
Operation method Press In + Alt +Tab for 3 seconds Press In + Ctrl + Q Press In + Shift + S Press In + Alt — Press In + Alt +Tab for 1 second
Hot-swap
Set-up Example
Documents / Resources
 |
Ducky DKON2108 Fuji Mechanical Keyboard [pdf] User Manual DKON2108, DKON2187, DKON2108 Fuji Mechanical Keyboard, DKON2108, Fuji Mechanical Keyboard, Mechanical Keyboard, Keyboard |