dsafe 210406 Export Dial Lock
How to unlock
The combination of your safe is set as follows :
It is necessary to accurately dial the four numbers shown.
- A. In the correct sequence
- B. In the correct rotation, and
- C. For the correct number of turns
- Step 1. The first number must pass the opening index mark over 3 times in a clockwise (right) direction and stop on the fourth full turn.
- Step 2. The second number must pass the opening index mark twice in a counter-clockwise (left direction and stop on the third full turn.
- Step 3. The third number must pass the opening index mark only once in a clockwise (right) direction and stop on the second full turn.
- Step 4. The fourth number must not pass the opening index mark turning counter-clockwise (left and it must stop the first time it appears.
- Step 5. Now turn the key in the cylinder lock to the right and open the door.
How to lock
- Step 1. Close the door
- Step 2. Turn the key to the left and remove it.
- Step 3. Spin the combination lock over 3 times in any direction.
- Please do not lose the combination only you know the code.
- To improve products constantly, the manufacturer reserves the right to alter the specifications without prior notice. Printed in Korea, April. 8, 2021 REV. 6
Documents / Resources
 |
dsafe 210406 Export Dial Lock [pdf] Instructions 210406 Export Dial Lock, 210406, Export Dial Lock, Dial Lock |
