DS18 LogoOWNER’S MANUAL
PSW10.2D
10″ DUAL VOICE COIL
SHALLOW SUBWOOFER
DS18 PSW10 2D Shallow Mount SubwooferDS18 PSW10 2D Shallow Mount Subwoofer - SymbolDS18 PSW10 2D Shallow Mount Subwoofer - Symbol

 

SPECIFICATIONS

Nominal Diameter  ………………………………………………………………… 10″ / 254 mm
Nominal Impedance  ……………………………………………………………….. 2+2 OHMS
RMS Power Handling  ………………………………………………………. 500 Watts
MAX Power Handling  …………………………………………………….. 1000 Watts
Sensitivity (1w/1m)  …………………………………………………………………….84 dB
Frequency Response a ……………………………………………………….. 20-800 Hz
Recommended Lo Pass Crossover ………………………………….. 90 Hz

MOTOR

Voice Coil Diameter ……………………………………………. 2.5″ / 63.5 mm
VC Former Material …………………………….Aluminum
Winding Material ……………………………………………………….Coppe
Cone Material  …………………………Water Resistant PPI
Surround Material  ………………………………………………… Rubber
Basket Material ………………………………………………………………… Steel
Basket Color  ……………………………………………………… Matte Black
Magnet Material …………………………………………………………………. Ferrite
Magnet Weight  ………………………………………………………………………………………… 58 Oz
Displacement Volume  ………………………………………. 0.8 L / 0.028 ft3

THIELE & SMALL PARAMETERS

Equivalent Volume  …………………….. Vas………………………………22 L / 0.77 ft3
Excursion (one way)  …………………………… Xmax ……………………………………. 9.5 mm
Free Air Resonance ……………….. Fs ……………………………………………. 32 Hz
Mechanical Factor  ……………………………. Qms …………………………………………… 3.84
Electrical Factor  …………………………………. Qes ……………………………………………. 0.56
Total Factor  …………………………………………….. Qts …………………………………………….. 0.49
Moving Mass  …………………………….. Mms ………………………………………… 165 g
Compliance  ……………………………. Cms ……………………………… 0.134 mm/N
Bl Factor  ………………………………………………………. Bl………………………………………………….. 14
Voice Coil Inductance  …….. Le ………………………………………….. 1.7 mH
Diaphragm Area …………………………… Sd……………………………………. 336.54 cm²
DC Resistance  ……………………………………… Re…………………………….. 1.8 + 1.8 OHMS
Efficiency Bandwidth Product  ……………………. EBP ………………………………………………. 57

RECOMMENDED ENCLOSURE

Sealed Internal Volume (minimum)  ……………..14.2 L / 0.5 ft3
Sealed Box Output Response (F3)  ……………………. 44 Hz

MEASUREMENT

Overall Diameter …………………………………………………………………… 10.23″ / 260 mm
Overall Depth  ………………………………………………………………………….. 3.6″ / 92 mm
Front Mount Baffle Cutout  …………………………………… 9.2″ / 234 mm
Mounting Depth  ………………………………………………………………. 3″ / 78 mm
Motor Diameter ………………………………………………………………….. 6.5″ / 165 mm

DS18 PSW10 2D Shallow Mount Subwoofer - MEASUREMENTS

MEASUREMENTS

DS18 PSW10 2D Shallow Mount Subwoofer - change products

WARRANTY

Please visit our website DS18.com for more information on our wrranty policy.
We reserve the right to change products and specifications at any time without notice.
Images may or may not included optional equipment.
warning - 1 WARNING:
Cancer and Reproductive Harm.
www.P65Warning.ca.gov

Recommended Box Dimension

DS18 PSW10 2D Shallow Mount Subwoofer - PARAMETERSPARAMETERS :

  • Box External Dimensions
    (WxHxD): 21.65” x 11.81” x 5.41“ /550 mm x 300 mm x 137.5 mm
  • Material Thickness: 1/2” / 15 mm
  • Net Internal Volume: 14.2L / 0.5ft3

DS18 PSW10 2D Shallow Mount Subwoofer - WOOD CUTSWOOD CUTS  QTY

  • Top – Bottom
    (WxH): 21.65” x 5.41”
  • Front – Rear
    (WxH): 21.65” x 10.63” / 550 x 270 mm 2
  • Left – Right
    (WxH): 4.23” x 10.63” / 107.5 x 270 mm 2

We LIKE I T LOUD
FOR MORE INFORMATION PLEASE VISIT DS18.COM

DS18 Logo

Documents / Resources

DS18 PSW10 2D Shallow Mount Subwoofer [pdf] Owner's Manual
PSW10 2D Shallow Mount Subwoofer, PSW10 2D, Shallow Mount Subwoofer, Mount Subwoofer, Subwoofer

References

Leave a comment

Your email address will not be published. Required fields are marked *