DREO DR-HAP009S User Manual

DREO-logo

DREO DR-HAP009S

DREO-DR-HAP009S-PRODUCT

Thanks for Choosing
Your support means the world to us. We hope you enjoy our product as much as we did creating it.

KNOWING YOUR APPLIANCE

Package Contents DREO-DR-HAP009S- (1) DREO-DR-HAP009S- (2)

USING YOUR APPLIANCE

Before Use

  1. Put it upside down. Rotate the bottom cover counterclockwise to unlock and take the cover off.
  2. Remove the filter from its packaging then put the filter back. DREO-DR-HAP009S- (3)
  3. Rotate the bottom cover clockwise to lock back in place (you will hear a distinctive sound when locked).
  4. Return to upright position on a ftat, stable, and clear surface. Plug the appliance into the power outlet.

DREO-DR-HAP009S- (4)

Control Panel  DREO-DR-HAP009S- (5) DREO-DR-HAP009S- (6)

Note, Long press. DREO-DR-HAP009S- (7) for 70 seconds to enter Low Power Standby Mode and turn off WiFi. To exit, long press DREO-DR-HAP009S- (8) for 5 seconds, and WiFi connection will restart.

LED Display
Constantly monitor the air quality in your room with the comprehensive and intuitive monitor display.
Note, You can turn off the LED display and lights using the  DREO-DR-HAP009S- (9) button or through the OREO app.DREO-DR-HAP009S- (10)

Air Quality Indicator Light 

Note:
The Air Quality Sensor detects PM 2.5 particles but cannot detect odors. If you feel that the indoor air odor is relatively strong, it is recommended to manually switch to the highest purifying speed. DREO-DR-HAP009S- (11)

Additional Features

DREO-DR-HAP009S- (12) Child lock 

  • Long press DREO-DR-HAP009S- (14) for 3 seconds to activate/deactivate the child lock function.
  • When activated, the display will show DREO-DR-HAP009S- (13) and all the buttons on the appliance will be locked.

DREO-DR-HAP009S- (15) On/Off Timer
When the appliance is ON/OFF, touch the timer button repeatedly to set a timer (from 0-12H) for the appliance to turn ON/OFF.

DREO-DR-HAP009S- (16) Memory
If the appliance is turned OFF or disconnected from power, it will operate under the previous settings (except the Timer setting) when it is turned ON again.

DREO-DR-HAP009S- (17)  Firmware Update

  • Check the firmware version on the OREO app and update regularly for the appliance to work more efficiently.
  • Display will show” DREO-DR-HAP009S- (18) during the update process.
  • Do not operate until the update is completed.

DREO-DR-HAP009S- (1) Display Auto Off
Display turns off after 5 seconds in Sleep Mode. Wake up the display with any button.

Getting the Most Out of Your Appliance 

  1. Keep the doors and windows closed when the air purifier is on.
  2. Do not block the air openings and keep away from curtains or walls.
  3. Maintain and replace the filter on a regular basis for maximum efficiency.

CONNECTING TO YOUR APPLIANCE

Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search “DREO” , then select and download the app.

DREO-DR-HAP009S- (19)

Look for “Smart Air Purifier 539S” when connecting your new appliance.

DREO-DR-HAP009S- (20)

You can use the OREO app to connect your appliance to Amazon Alexa or Google Home. Please follow the in-app instructions to set up your voice assistant.
NOTE: You must create a OREO account to access voice assistants.

  1. Launch OREO and sign in or create an account by following in-app instructions.
  2. Enable Bluetooth on your mobile device and plug in your appliance.
  3. Hold  DREO-DR-HAP009S- (21) for 5 seconds to start WiFi connection settings.
    (Tip, The WiFi icon  DREO-DR-HAP009S- (22)  will keep flashing when pairing.)
  4. Tap + Add Device and select Smart Air Purifier 539S.
  5. Follow in-app instructions to complete WiFi connection.
  6. You’re now ready to control the appliance on your app. (Tip, To restart connection settings, hold   DREO-DR-HAP009S- (21)   again for 5 seconds)

CLEANING AND MAINTENANCE

Replacing the Filter
The filter life is measured by the air purifier’s algorithm which is based on the working mode, fan speed, run time, and indoor air quality. It’s recommended to replace the filter every 6-8 months or when the filter change reminder alerts.

  1. The filter change reminder will flash when the filter needs to be replaced. Turn off and unplug the air purifier.
  2. Rotate the bottom cover to unlock then take the cover off. DREO-DR-HAP009S- (23)
  3. Remove the plastic packaging.
  4. Remove the old filter then put the new filter in place. DREO-DR-HAP009S- (24)
  5. Rotate the bottom cover clockwise to lock back in place (you will hear a distinctive sound when locked).
  6. Return to upright position and long press the  for 5 seconds until it beeps, to reset the filter change reminder.

DREO-DR-HAP009S- (25)Cleaning the Inside & Outside 

  1. Unplug the air purifier before any cleaning and maintenance.
  2. Remove the filter and clean the inside with a dust vacuum.
  3. DREO-DR-HAP009S- (26)Wipe clean the housing with a dry, soft, non-abrasive cloth.

DREO-DR-HAP009S- (27)

Cleaning the Filter 

  • For optimal use, the outer pre-filter can be cleaned with a soft, dry brush once every 2-4 weeks.
  • Keep away from water and humid areas. Moisture will allow mold to grow.

DREO-DR-HAP009S- (28)

Looking for help?
Contact us to get expert support.

Documents / Resources

PDF thumbnailDR-HAP009S
User Manual · DR-HAP009S, DREO, DREO Smart Air Purifier for Home, Up to 1176 ft, HEPA Sleep Mode, Air Cleaner for Large Rooms Bedrooms, Wi-Fi Voice Alexa, Pets, Smoke, Dust, Pollen Odors, PM2.5 Monitor, DR-HAP009S Dreo 539S White Wi-Fi, B0H8TJXFMR, B0H5R2SYQF, B0HC2NW6QZ, B0H8SB7YY1, B0H5R53XC7, B0H691WC3S, B0H5R62L3H

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.