D1 POS Terminal
“
Specifications
- Model: D1, D1 IN
- Manufacturer: Dreamtek Intelligent Technology Co., Ltd
- Power: 32.5/29.5 dBm
- Wireless Bands: GSM850 /1900 UMST Band V, LTE B2 /5 LTE B7
/38/41, WIFI 2.4G 802.11b 802.11g 802.11n WIFI 5G 802.11a/n/ac BT
BR/EDR, BLE NFC SAR - Output Power: 23 dBm for most wireless bands
- SAR: 2.961 W/kg
Product Usage Instructions
1. Power On/Off Instructions
Power On: Press the ON/OFF button for 3
seconds.
Power Off: Press the ON/OFF button for 3
seconds and then click ‘power off’ on the screen.
2. Magnetic Stripe Card
Put the magnetic card into the magnetic card slot with the
magnetic side towards the printer. Ensure the card is smooth and
steady when swiping it.
3. Smart Card
Insert the smart card into the smart card slot with the metal
pads facing up. Refer to the card identification for correct
orientation.
4. Contactless Card
Tap the contactless card near the contactless card reader zone
on the device to initiate a contactless card transaction. Use only
one contactless card at a time to avoid conflicts.
5. Charging
Connect the USB-C cable to the POS terminal and the other end to
a dedicated power source to charge the terminal.
FAQ
A: Yes, unauthorized changes to the equipment can lead to
consequences and may impact its performance. It is recommended to
contact after-sale service personnel for installations or
modifications.
Q: What should I do if I encounter interference issues with the
device?
A: If you experience interference issues, ensure that the device
is operated within specified frequency ranges and follow FCC
regulations. Contact the manufacturer for guidance on minimizing
interference.
“`
POS Terminal User Manual
User Manual
Thank you very much for choosing Dreamtek products, please read this manual before deployment so that you could know the performance better. Please keep this manual for your reference.
Our company will try best to adopt new technologies, new components, new software to improve products. The features, functions and operations described in this document may be different from the performance of the selling products, in some cases, the images are prototype. Please inquiry the company or agent for appropriate update.
The device should be installed by after sale service personnel. Our company shall not be liable for any consequences arising from unauthorized changes to the equipment, replacement of the connected equipment and cables which are not specified.
The User Manual applies to Model D1, D1 IN.
Dreamtek Intelligent Technology Co., Ltd, reserves the right to change product technical specification without prior notice.
FCC Regulations
1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.
3. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Radio Frequency (RF) Energy
1. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States.
2. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit recommended by the general public is 1.6W/kg Averaged over one gram of tissue by IEEE Std 1528.
3. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
4. The highest reported SAR for body-worn accessory and simultaneous transmission use conditions is 1.404W/kg and 1.404W/kg respectively.
5. This device is restricted to indoor use only when operating in 5150 to 5250MHz frequency range.
Notice for FCC Operating Frequency and Output Power
Band GSM850 /1900 UMST Band V
LTE B2 /5 LTE B7 /38/41
WIFI 2.4G 802.11b 802.11g 802.11n WIFI 5G 802.11a/n/ac BT BR/EDR
BLE NFC SAR
Power 32.5/29.5 dBm
23 dBm 23 dBm 22.5 dBm
17 dBm 16 dBm 15 dBm
15 dBm 10 dBm -2dBm 50.297 dbuv/m 2.961 W/kg
1. Overview
POS Terminal User Manual
2. User instruction
2.1 ON/OFF instruction POWER ON: press ”
” ON/OFF button for 3 seconds
POWER OFF: press ”
” ON/OFF button for 3 seconds and then click ” power off ” on the screen.
2.2 Magnetic stripe card
Put the magnetic card into the magnetic card slot to read it, with magnetic side towards the printer. Keep the card smooth,
steady when swiping the card.
2.3 Smart card
Insert smart card into the smart card slot, with the metal pads of the smart card facing up, please refer to card identification.
2.4 Contactless card
Tab the contactless card near the contactless card reader zone on the device, to make contactless card transaction.
Put one contactless card one time to avoid confliction.
2.5 Charging
Connect the USB-C cable to POS terminal, connect the other end of the cable to the dedicated power to charge the terminal.
3. Terminal specification
Item
Specification
Product
D1
Model Name D1, D1 IN
CPU
64-bit high performance CPU
Memory
2GB RAM + 32GB ROM Flash Optional, RAM up to 4GB, Flash up to 64GB
Operating System VanOS secure payment system, based on Android 14.x
Display
6.517 inch IPS, 1600*720 Optional, 5 inch IPS, 1280*720
SD
Micro-SD card, up to 128GB
Connectivity
4G/3G/2G, WiFi, BT, GPS
Touch Screen Capacitive touch screen
Smart card
Conform to ISO7816, EMV level 1 & 2
Magnetic Stripe Support ISO7811, 3 tracks
Contactless
Conform to ISO/IEC 14443 Type A&B, Mifare
Item
Specification
Rear camera
2MP AF, with flash light; Optional 5MP AF, with flash light
Front camera Optional, FF 2MP
USB-C (OTG; For charge and data exchange); 2 x SAM, Physical interface 1 x SIM or 1 x SAM, 2 x SIM; Pogo PIN for charging
Optional, eSIM
LED indicators Charging LED
Multimedia
Speaker, microphone
Tax control interface Optional, USB Token (For data exchange)
Printer Lion Battery Power adaptor Accessories
Built-in high-speed printer, 25lps, support paper roll with width of 58mm and diameter of 40mm
Field removable, 7.4V/2600mAh Optional, 7.2V/3500mAh Input: AC 100V~240V/50~60Hz Output: DC 5V/2A; Optional, DC 5V/4A
Optional charging base, feature base, with token configuration
Temperature
Operating temperature -10°C~40°C Storage temperature -20°C~70°C
Humidity
5%~95%, no condensation
POS Terminal User Manual
4. Instruction and usage
4.1 Please charge the terminal within the specified voltage range, if the voltage is too low or too high, the performance of the terminal might be effected or damaged.
4.2 Please make sure the connection is correct when connecting the device to the host and/or the power adaptor. 4.3 Don’t damage the power cable, if the cable is damaged, do not use it anymore. 4.4 Don’t expose the terminal with direct sunlight, high temperature, humidity, dusty or strong corrosive gas. 4.5 Stay away from liquid, don’t use the product where the water may pour over or enter into, don’t operate the product with
wet hand. 4.6 It is strictly prohibited to open the terminal without permission, otherwise the terminal will fail, the consequence will be at
your own risk. 4.7 If the terminal fails, please contact maintenance personnel, user is not allowed to maintain or repair the terminal without
permission. 4.8 Be sure to use the dedicated battery or specified type of battery, otherwise it may cause the risk of explosion. Don’t
disassemble, impact, squeeze the battery. Don’t short circulate the electrodes of the battery. Don’t expose to fire or high temperature. Stop using the battery after soaked in water. 4.9 Please remember to close the battery cover after replacing the battery.
4.10 Please check the smart card slot carefully before usage, to make sure there is no shims or other foreign objects inside. 4.11 It is strictly prohibited to charge and replace batteries in dangerous places. Risk of explosion if battery is replaced by an
incorrect type.Dispose of used battery according to the instructions. 4.12 Hereby, [Dreamtek Intelligent Technology Co., Ltd] declares that the radio equipment type [Model: D1, D1 IN] is in
compliance with Directive 2014/53/EU. 4.13 Only use Dreamtek qualified power adaptor for battery charging. For the battery, the charging temperature is 0°C to
40°C, the operating temperature is -10°C to 40°C. Do not operate and use the terminal beyond the temperature range, otherwise it may cause the risk of explosion. 4.14 The battery cover is intended for occasional use only by the ordinary person, to install SIM card.
5. Password anti-peep instruction
1. Using body or hand as a blocker when entering the password to prevent it from being peeped. 2. The CCTV area should as far as possible from the placement of the terminal when installing the surveillance camera, so
as to avoid the cardholder’s PIN leakage. 3. Clients and merchants need to conduct routine inspection to ensure that the device has not been changed and there are
no suspicious objects within the smart card and magnetic card slot.
6. Packing list
No.
Name
1
D1 POS Terminal
2
Battery
3
Power adaptor
4
USB-C charging Cable
5
Operation manual link
6
Paper roll
Qty 1 1 1 1 1 1
Dreamtek Intelligent Technology Co., Ltd Phone: +86 15901884986 E-mail: Dtk@dreamtek-global.com
Room 508, Building A2, Area one of Zhongan Chuanggu Science Park, No. 900 of Wangjiang West Road, High-tech Zone, Hefei, Anhui, China
POS Terminal User Manual
Documents / Resources
 |
DREAMTEK D1 POS Terminal [pdf] User Manual D1 IN, D1 POS Terminal, D1, POS Terminal, Terminal |