DOSATRON D14MZ10 Chemical Blending System
Product Specifications
- Product Name: Chemical Blending System
- Foaming Systems Model Numbers: PS1A155-F1-A1 (24V), PS1A155-F2-A2 (110V)
- Non-Foaming Systems Model Numbers: PS1A155-F1 (24V), PS1A155-F2 (110V)
- Features:
- Conserves time and energy
- Minimizes employee exposure and spills
- Water-powered chemical metering pump with external adjustments
- 100:1 to 10:1 chemical dilution range
- 24 and 110 Volt fluid and air solenoid valves
- Manufacturer Website: www.dosatron.com
- Model Number: 011425-S-D14MZ10AFDII
Product Usage Instructions
Installation:
Follow the installation guide provided with the product to set up the system correctly.
Operation:
- Ensure the system is connected to the appropriate power source (24V or 110V) based on the model.
- Adjust the chemical dilution ratio using the external adjustments on the water-powered pump.
Maintenance:
- Regularly check for leaks and ensure all valves are functioning properly.
- Clean the system as recommended in the user manual to prevent clogs and maintain performance.
Safety Precautions:
- Always wear appropriate protective gear when handling chemicals or working with the system.
- Keep the system out of reach of children and untrained personnel.
CHEMICAL BLENDING SYSTEM
| FOAMING SYSTEMS | NON-FOAMING SYSTEMS |
| PS1A155-F1-A1 (24V) | PS1A155-F1 (24V) |
| PS1A155-F2-A2 (110V) | PS1A155-F2 (110V) |
| SYSTEM FEATURES | |
| Turnkey systems for blending carwash chemicals with water – 24” by 24” panel | Water-powered chemical metering pump with external adjustments |
| Simple to install and commission | 100:1 to 10:1 chemical dilution range |
| Conserves time and energy | 24 and 110 Volt fluid and air solenoid
valves |
| Minimizes employee exposure and spills | |
- 011425-S-D14MZ10AFDII
FAQs
Q: Can I use chemicals other than those recommended by the manufacturer?
A: It is recommended to use only chemicals approved by the manufacturer to ensure system compatibility and performance.
Q: How often should I calibrate the system?
A: Calibration frequency may vary based on usage, but it is generally recommended to calibrate the system at least once a month for optimal performance.
Documents / Resources
 |
DOSATRON D14MZ10 Chemical Blending System [pdf] Owner's Manual D14MZ10, PS1A155-F1-A1 24V, PS1A155-F2-A2 110V, PS1A155-F1 24V, PS1A155-F2 110V, D14MZ10 Chemical Blending System, Chemical Blending System, Blending System |