DOSATRON D07RE5 GPM Injector
PRODUCT DESCRIPTION
The water-powered Dosatron D07RE5-3 GPM injector is easy to install with an Industrial Plumbing Kit (IPK34-3GPM) and has a flow of 0.02 to 3 GPM with a ratio range of 1:128 to 1:18.
PRODUCT SPECIFICATIONS
- Dilution Range: 1:128 to 1:18 (0.8% to 5.5%)
- Water Flow Range: 0.02 to 3 GPM
- Operating Pressure Range: 4.3 to 85 PSI
- Available Housing Materials:
- Polypropylene (Standard Blue)
- PVDF (White)
- Dimensions: 10” x 4 1/2”
- Weight: 2 lbs
- Connection Size: 3/4” NPT
- Maximum Temperature: 104o F
- Included Accessories: 6’ clear suction tube, strainer, weight, mounting bracket and quick start guide.
- Recommended Accessories: 200 mesh filter, check valve, pressure regulator, flow restrictor.
MAINTENANCE KITS
- Injection Seal Kit (Part #: PJDl095) – For yearly maintenance
Recommended Installation for Industrial Applications
- 3/4” polypropylene single union ball valve
- 1/2” stainless steel ball valve
- 3/4” polypropylene 200 mesh tee filter
- 3/4” brass pressure regulator w/gauge
- 3/4” 3 GPM flow restrictor
- 3/4” polypropylene check valve
- 3/4” union schedule 80 PVC
- 3/4” x 2” polypropylene fittings
- 1/2” x 2” polypropylene fittings
- 1/2” x 1/2” barb fitting
- 3/4” male to 1/2” female reducer bushing
- 3/4” Tee
- 3/4” street elbows
- Roll of thread tape
- Instructions card
- Zip tie
Dosatron International
2090 Sunnydale Blvd.
Clearwater, FL, USA
800-523-8499
www.dosatron.com
Dosatron International, LLC. is an industry leader in water-powered, proportional chemical injectors. Dosatron products are manufactured according to ISO 9001:2000 and ISO 14001:2004 standards.
Documents / Resources
 |
DOSATRON D07RE5 GPM Injector [pdf] Instruction Manual D07RE5 GPM Injector, D07RE5, GPM Injector, Injector |
