USER MANUAL
V83PROM2 Fully Customizable Mechanical Keyboard
Fully Customizable / Hot Swappable / RGB Lights
Product Name: Mechanicl keyboard
Keyboard Model: V83PROM2
Support System: ( Win/Android/Mac/10S )
Shell Material: All-metal aluminum alloy shell
Switch Support: 82-key mechanical switch
Data Line Support: USB Type-C Separation
Backlight : RGB Software:VIA
System switching/ Working mode switching
Bluetooth pairing /2.4G pairing
Lamp efficiency Mode switching /Restoring factory settings
Adjustment of backlight chromaticity
The breathing speed of backlight lamp effect
Backlight brightness adjustment
Adjustment of backlight saturation
Volume adjustment
LED status overview
Description of multimedia combination
| Source button (Press first) | Combine key (Then press) | Multimedia functior (WIN) | Multimedia function (MAC Default) |
| FN + | Fl | Brightness decrease | Brightness decrease |
| F2 | Brightness increase | Brightness increase | |
| F3 | |||
| F4 | Search | ||
| F5 | calculator | ||
| F6 | Music | ||
| F7 | Last one | Last one | |
| F8 | Pause / play | Pause / play | |
| F9 | Next one | Next one | |
| FIO | Mute | Mute | |
| Fll | Volume decrease | Volume decrease | |
| F12 | Volume increase | Volume increase |
Support wireless mode switching/pairing
Bluetooth:
N+ 1/2/3 (short press to switch, long press to pair)
The Corresponding key light indicates that it flashes quickly when pairing, and flashes slowly when reconnecting. After the connection was successful, the key light stays on for 2 seconds and then returns to the overall backlight effect. If the pair cannot be paired within 1 minute, it will automatically enter the sleep state; When connecting back, if the connection is not successful within 20 seconds, itwill automatically enter sleep.
2.4G:
FN+4 (short press to switch, long press to pair)
Sleep mode
If there is no action in the wireless state for 10 minutes, the keyboard automatically enters the first level sleep. At this time, the light is off, the Bluetooth or 2.4G is in the connected state, and there is key output at the same time. When the keyboard does not work for 30 minutes, it enters the second-level hibernation state. At this time, the wireless of the keyboard is disconnected. No code will be sent when the keyboard is pressed for the first time, When the keyboard is automatically connected after waking up, there will be key output after the connection is normal.
Battery indicator:
Lithium battery (3.7V): When the battery voltage is lower than 3.5V, the red indicator light of the space key on the keyboard flashes, and when charging, the red indicator light of the space key is always on; When fully charged, the space key will follow the backlight, and the keyboard will automatically shut down when it is lower than 3.0V. After automatic shutdown, the key is invalid, and the low battery indicator lights up, indicating that charging is required at this time.
Lithium battery power query
In the wireless state, press FN+space key, and digital key 1-0 will turn on the green light to display the percentage of battery power: 1 key indicates 10% battery power, 2 keys indicate 20% battery power
Technical Specifications
Keyboard size: 335*143*47mm
Maximum brightness operating current : < 300 mA
Working distance: 8-10m
Lithium battery capacity: 4000 mAh
Working voltage: 3.7V
Charger specifications: 5V
1A
VIA Key remapping software
VIA is software that maps buttons, If VIA software does not recognize your keyboard Please contact us for technical support (VIA is valid only when the keyboard is connected to the computer via a data line)
Keyboard features
- Tri modes:Wired/Bluetooth/2.4G
- 83 key minimalist style, freely mapped key code and lamp effect
- Removable Power Cable
- Key switchs are freely customizable and support hot-swappable
- Built-in large capacity lithium battery
- A full keyboard RGE cool lighting effect
- Independent metal knob adjust volume
- All-metal shell
Restore factory settings
What if the keyboard fails, or if you want to go back to your original state after modifying the key code and light effect?
- Press fn+ESC in order (wait 3 seconds); restore factory settings.
- Download the correct firmware for your keyboard from our website, and then unplug the data line from the keyboard.
- Unplug the space bar key cap and find the reset point of the PCB
- Short-circuit the reset point for a long time, insert the keyboard data cable at the same time, and then disconnect the reset point, and the keyboard enters DFU mode.
- You can then use the QMK toolbox to refresh the firmware.
- Restore the keyboard to the factory settings again and press fn+ESC for 3 seconds.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio o television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
What’s in the Package?
– 1×83-Keys Tri model Mechanical keyboard
– 1x USB Dongle
– 1x USB Type-C Cable
– 1x User Manual
– 1x Quick Start Guide
– 1x 2 in-1 Keycap puller switch puller
Note:
Do not place the accessories and packaging parts of this product in contact with children in order to prevent asphyxiation caused by accidents.
Do ot expose the product to extreme temperatures below-10 °C (5 °F) or above 50 °C (131 °F) to maintain the service life of the keyboard.
Documents / Resources
 |
Dongguan V83PROM2 Fully Customizable Mechanical Keyboard [pdf] User Manual 2A85Y-V83PROM2, 2A85YV83PROM2, v83prom2, V83PROM2 Fully Customizable Mechanical Keyboard, V83PROM2, Fully Customizable Mechanical Keyboard, Customizable Mechanical Keyboard, Mechanical Keyboard |