Dongguan IC-GK08 Wireless Keyboard and Mouse User Manual

Keyboard
Product Size	430.9 x 146.9 x 34.2 7 mm
Product Weight	520g
Connectivity	2.4G Wireless connection
Power	1 AAA Battery
Volta ge	1.5V
Connection Distance	8-10M
Power Saving	Enter sleep mode after 10 minutes without action
WorkingDistance	Within 10 meters
Key Life	10 Million Strokes

Mouse
Mouse DPI	800-1200-1600
Power	1 AA Ballery
CConnectionDistance	8-10M
Power Saving	Enter sleep mode after 10 minutes without action

Compatible Systems: Windows XP, Windows 7/8/10/11, Mac OS

You will receive

How to set up

Step 1: Please put the USB receiver into your computer.

Step 2: Put batteries in the keyboard and mouse, then turn on the power switch.
Step 3: The keyboard and mouse will automatically connect to the computer, no driver needed.

LED Indicator Light

Keyboard

1: Num Lock
The Num Lock indicator will turn blue when Num Lock is activated.

A: Caps Lock
The Caps Lock indicator will turn blue when Caps Lock is activated.

Low battery warning
The indicator light will turn red when the battery is almost empty.

Multimedia button description

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Note
The multimedia keys are for Windows 8 and Windows 10; for other systems, there may be no function for some combined keys. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antennIncreasease the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult üle dealer or an experienced radio/TV technician for HDP changes or modifications not expressly approved by the party responsible for them could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

Frequently Asked Questions

Q1: The keyboard and mouse can not be connected.
A1: Pbase switch on the keyboard, press Esc+K, the LED indicator light will flash quickly.
Plug the 2.4GHz USB receiver into the computer. Within 10 seconds, put the keyboard 10 feet away from the receiver for pairing. When the light turns off, the keyboard pairing is successful.
Q2: What should I do if the keyboard gets delayed or stuck?
A2: Please check that there is no 2.4GHz device (e.g., router) nearby to interfere with the connection.
Please check that there is no full metal case that may block the signal.
Q3: Where is my USB receiver?
A3: The USB receiver is placed on top of the keyboard inside the package, please look for it carefully.
Please contact us to get a free replacement if you have lost the USB receiver.

Documents / Resources

Dongguan IC-GK08 Wireless Keyboard and Mouse [pdf] User Manual
IC-GK08 Wireless Keyboard and Mouse, IC-GK08, Wireless Keyboard and Mouse, Keyboard and Mouse

References

User Manual

Dongguan IC-GK08 Wireless Keyboard and Mouse

Product Usage Instructions

Product Specification