domli Premium Solid Oak Bench for Dining Table Installation Guide

domli Premium Solid Oak Bench for Dining Table

Product Information

Specifications:

• Wood Top Thickness: 27mm or 40mm
• Screw Sizes: M5 x 15mm (for 27mm thick worktop), M5 x 25mm (for 40mm thick worktop)
• Max Weight Capacity: 40 Kg

Product Usage Instructions

Tools Required:
You will need an Electric Impact Driver with a PZ2 bit (Recommended) or a Manual Screwdriver PZ2 for assembly.

What’s Included:

• 1x Wood Top
• 2x Black Square Legs
• 4x Black Pan Head Screws
• 4x Rubber Feet

Installation Guide:

1. Read the Safety Guidelines provided in the manual before starting the assembly.
2. Place the top on a protected surface with the underside facing upwards to prevent scratching.
3. Ensure ample space around the top for comfortable assembly.
4. Align the legs with the holes on the top before securing them.
5. Secure the legs to the top using the provided pan head screws and an electric/impact screwdriver (recommended).
6. Tighten the screws to 60% when all are in place.
7. Screw the rubber feet in place to complete assembly.

Enjoy Your Purchase:
Finally, with assistance from another person, complete the assembly and enjoy your new product.

Frequently Asked Questions (FAQ):

• Q: Can I exceed the maximum weight capacity of 40 Kg?
  A: No, it is not recommended to exceed the maximum weight capacity to prevent damage and instability of the product.
• Q: What should I do if I encounter any defects during assembly?
  A: Contact us immediately for further assistance and guidance on how to proceed.

What’s included

Tools you’ll need

Safety First

1. Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
2. Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
3. Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
4. Please follow the provided instructions carefully to ensure proper assembly and use of the product.
5. Keep small parts away from children or pets, as they can be a choking hazard.
6. Inspect the product for any defects or damages before assembly, and contact us if you notice any issues.
7. Please do not modify the product or use it for any purpose other than its intended use.
8. Use caution when working with sharp tools or edges, and keep them away from children and pets.
9. If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
10. Do not sit or stand on the product.
11. This product is not intended to support people or heavy objects. Avoid placing excessive weight to prevent damage and instability. MAX 40 Kg

Installation Instruction

1. Please read the Safety Guidelines above before you start to assemble the product. To prevent scratching of the surface, place the top on a protected surface or carpet and make sure that the underside of the product is facing upwards. To allow you to work comfortably, ensure ample space around the top.
2. There is a certain level of tolerance between each component. The legs are matched to the top before despatch. To ensure that the legs are properly aligned with the holes, it is recommended that you place each leg over the accompanying holes to ensure that the fittings marry up before securing them. Please note that the orientation of the leg can be in two directions. Screw the rubber feet in place.
3. Secure the legs in position and fasten them to the top using the provided pan head screws and an electric/impact screwdriver (recommended) ensuring a secure attachment of the legs. Tighten the screws to 60%, when all are in position, you can then fully tighten. Avoid over-tightening the screws.
4. Finally, with assistance from another person, lift the product and stand it upright.

Now, sit back, relax and enjoy your new purchase!