DocResources Desk

Hardware

BEFORE YOU BEGIN
Identify ALL parts and hardware to ensure everything is included.

Desk Parts

1. Desk Top (1)
2. Large Top Moulding (1)
3. Small Top Moulding (1)
4. Side Molding (3)
5. Left Side (1)
6. Back Panel (1)
7. Middle Gable (1)
8. Bottom Shelf(1)
9. Right Side (1)
10. Bottom Shelf Molding (1)
11. Adjustable Shelf (1)

Required Tools

Optional Tools:
Using a power screwdriver will speed up assembly.

Caution
Do not over tighten any screw. The last few turns of each screw should be done very slowly or by hand

Assembly Tips

How to properly insert and lock cam and connector hardware

Inserting Plastic DowelsTo attach moldings:
Use your hands and press firmly
DO NOT USE HAMMER ON MOLDINGS

How to Assembly

Documents / Resources

DocResources Desk [pdf] Installation Guide DocResources, Desk, 3025728

References

• User Manual