Dockteck Type C to HDMI USB Ax2 SD Micro PD Charging Alt mode

Dockteck Type C to HDMI USB Ax2 SD Micro PD Charging Alt mode

DEAR CUSTOMER

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.

INTRODUCTION

This is a Type-C 6-in-1 hub with HDMI, 2 USB-A,SD/TF card slots and Type-C female port, providing an ideal solution for extending the port of Type-C or Thunderbolt 3 host (PC/Laptop/Mobile phone, etc.),especially for those host with a single Type-C port. This hub adopts the latest DP1.4 Alt mode supported IC, enabling to output HDMI video with max 4k/60Hz and at the meanwhile transfer USB 3.1 data with max 5Gbps. 2 USB-A ports allow you to connect 3USB devices simultaneously. SD/Micro SD allow to insert 2 card slots simultaneously for data transmission or for reading/writing information on the host. Besides, the Type-C female supports PD3.0with max 100W PD Charging. It can work on all Type CandThunderboltTM3 host that supports DP Alt mode(including DP1.2andDP1.4 Alt mode).When working on Thunderbolt TM 3 host, this product transmits DP signal.

FEATURES

Upstream: 

  • Type-C Malex1(Connect to host)
    Support DP1.4 Alt mode(DSC3:1 and HBR3), with bandwidthmax2 lanes 16.2Gbps (8.1Gbps per lane),downward compatible with DP1.2 Alt mode

Note: To get max bandwidth, the host should support DP1.4 Alt mode with DSC.

Downstream

HDMI

  • Support HDMI max 4K/60Hz,4:4:4,8bit with 18Gbps Bandwidth
  • Support 6/8/10/12 bit color depth output
  • Support output pixel format RGB4:4:4/YCbCr4:4:4/YCbCr4:2:2
  • Support HDCP 2.2&HDCP1.4
  • Support HDR

Note: When connecting a DP1.4 Alt mode supported host, the max resolution of HDMI is 4k/60Hz; When connecting a DP1.2 Alt mode supported host, the max resolution of HDMI is 4k/30Hz due to bandwidth limitation

USB-A 3.0X2

  • 1 USB-A port supports BC 1.2 with max 7.5W(5V@1.5A) downstream charging, 2 USB-A share max 8W(5V/1.6A) downstream charging.
  • Max 5Gbps bandwidth per USB-A port

SD/Micro SD

  • Support Secure Digital v3.0 UHS-I (Ultra High Speed):SDR12(12.5Mbyte/s)/SDR25(25Mbyte/s)/SDR50(50Mbyte/s)/DDR50(5 0Mbyte/s)/SDR104(104Mbyte/s)

Type-C Femalex1(for PD Charging)

  • Support PD Charging 100W (20V/5A)
  • Support Fast Role Swap of PD 3.0, the connected device will not get disconnected while plugging in and out PD Adapter
  • 8W is dedicated to the functioning of this product, the rest power(max 92W) will be passed to charge for the host

SPECIFICATIONS

Input/output Connector
Input Type-C Male x1
Output HDMI Female x1 USB-A Femalex2 SD Card Slotx1

Micro SD Card Slotx1

Type-C femalex1(PD)

Warranty
Limited Warranty 1 Year
Environmental
Operating Temperature 0℃ to +45℃
Operating Humidity 10% to 90 % RH (no condensation)
Storage Temperature -10℃ to +70℃
Storage Humidity 10% to 90 % RH (no condensation)
Power Supply
USB-C PD Charging Port 100W(20V/5A)
Regulatory Approvals
Certifications FCC,CE
Accessory Adapter
User Manual English Version

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

  • Main unit x1
  • User Manual x1

CONNECTION DIAGRAM

CONNECTION DIAGRAM

Documents / Resources

Dockteck Type C to HDMI USB Ax2 SD Micro PD Charging Alt mode [pdf] User Manual
Type C to HDMI USB Ax2 SD Micro PD Charging Alt mode, HDMI USB Ax2 SD Micro PD Charging Alt mode, SD Micro PD Charging Alt mode, Charging Alt mode, Alt mode, mode

References

Leave a comment

Your email address will not be published. Required fields are marked *