dji RC PRO 2 Remote Controller Instruction Manual

dji RC PRO 2 Remote Controller

Specifications

• Power On/Off
  To power on/off the device, press the power button once, then press and hold it.
• Remote Controller Activation
  The remote controller needs to be activated before the first use. Ensure that it can connect to the internet during activation.
• Safety Guidelines
  Ensure to read and understand the safety guidelines provided at  https://www.dji.com/rc-pro-2. This product is not intended for children.
• DJI Fly App
  Download the DJI Fly App for enhanced control and features.

Tutorial Videos

Power on/off: press, then press and hold.

The remote controller needs to be activated before using for the first time. Make sure the remote controller can connect to the internet during activation.

Safety at a Glance
By using this product, you signify that you have read, understand, and accept the terms and conditions of this guideline and all instructions at https://www.dji.com/rc-pro-2. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT HTTPS://WWW.DJI.COM/SERVICE/POLICY. THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON “AS AVAILABLE BASIS” WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for children.

Operating frequency allowed varies among countries and regions. Please refer to local laws and regulations for more information.

FCC Compliance

Notice
Supplier’s Declaration of Conformity

• Product Name: DJI RC PRO 2
• Model Number: RC520
• Responsible Party: DJI Research LLC
• Address: 17301 Edwards Road, Cerritos, CA 90703
• Website: www.dji.com

DJI Research LLC, as the responsible party, declares that the above-mentioned model has been tested and complies with all applicable FCC rules and regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.

There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, determined by turning the equipment off and on, the user is encouraged to try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for assistance.

RF Exposure Information (FCC)
This remote controller complies with FCC radiation exposure limits for an uncontrolled environment. Users must follow the specific operating instructions to satisfy RF exposure compliance.

• The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
• The portable device meets FCC standards for radio wave exposure.
• SAR Limits: Body: 1.6

EU Compliance Statement:

• SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI RC PRO 2(RC520)) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU, Directive 2012/19/EU (WEEE), Directive 2011/65/EU (ROHS), and Regulation 1907/2006 (REACH).
• A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
• EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Compliance Statement:

• SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI RC PRO 2(RC520)) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
• A copy of the GB Declaration of Conformity and PSTI SOC are available online at www.dji.com/euro-compliance

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

https://www.dji.com/rc-pro-2

DJI is a trademark of DJI.

Copyright © 2025 DJI All Rights Reserved.

FAQ

Q: How do I activate the remote controller?
A: The remote controller needs to be connected to the internet for activation. Follow the instructions provided in the manual.

Q: What is the operating frequency of the device?
A: The operating frequency of the device is 2.4000-2.4835 GHz.