dji Osmo Action Camera User Manual

dji Osmo Action Camera

Specifications

Quick Setup & Use

1. Open the battery compartment cover, insert the Osmo Action battery with contacts facing the camera, then close and lock the cover.
2. Insert a microSD card (not included) into the microSD card slot.
3. Charge the camera using the included USB-C cable with a 5V/2A charger (not included). Charge time is ~90 minutes; LED lights red while charging and turns green when fully charged.
4. Turn on the camera. To activate it, connect your phone to the camera Wi‑Fi hotspot (SSID: Osmo Action_XXXX) and open the DJI Mimo app, then follow the on-screen instructions.
5. Use the buttons: press the shutter once for a photo; press and hold the shutter to start/stop recording. Use the power button to switch screens and cycle shooting modes.

Read Before First Use

• Before using, watch all tutorial videos on the official DJI website (https://www.dji.com/osmo-action) and read the user manual, disclaimer, and safety guidelines.
• Download the DJI Mimo App from the App Store or Google Play to activate and control the camera.

Package Contents

• DJI Osmo Action Camera × 1
• Osmo Action Battery × 1
• USB-C Cable × 1
• Curved Adhesive Mount × 1
• Flat Adhesive Mount × 1
• Quick-Release Base × 2
• Vertical Adapter × 1
• Lens Protector × 1
• User Manual × 1

Overview

• Front Screen: Displays live view, settings, and battery status.
• Rear Touchscreen: 2.25-inch touchscreen for easy control and playback.
• Shutter/Record Button: Press once to take photos, press and hold to start/stop recording.
• Power Button: Press once to turn on/off, press and hold for 3 seconds to force restart.
• USB-C Port: For charging and connecting to a computer.
• MicroSD Card Slot: Supports up to 256GB (Class 10 or UHS-I required).
• Lens: 145° FOV, f/2.8 aperture, with a built-in lens protector.

Getting Started

Installing the Battery and MicroSD Card

1. Open the battery compartment cover.
2. Insert the battery with the contacts facing the camera.
3. Insert a microSD card (not included) into the slot.
4. Close the cover and ensure it is locked.

Charging the Camera

• Use the included USB-C cable and a 5V/2A charger (not included).
• Charging time: ~90 minutes (0-100%).
• The status LED will light red while charging and turn green when fully charged.

Activating Osmo Action

1. Turn on the camera.
2. Connect your phone to the camera’s Wi-Fi hotspot (SSID: Osmo Action_XXXX).
3. Open the DJI Mimo App and follow the on-screen instructions to activate the camera.

Operation

Button Features

• Press Power Button once: Turn on/off the camera.
• Press Shutter Button once: Take a photo.
• Press and hold Shutter Button: Start/stop video recording.
• Press Power Button twice: Switch between front and rear screens.
• Press Power Button three times: Cycle through shooting modes.

Shooting Modes

• Video: Supports up to 4K/60fps, 2.7K/60fps, 1080p/120fps.
• Photo: 12MP still photos.
• Slow Motion: 1080p/240fps slow-motion video.
• Timelapse: Time-lapse, hyperlapse, and motion-lapse modes.
• Burst: 3/5/10 photos per burst.

DJI Mimo App Features

• Live view and remote control.
• Camera settings adjustment (ISO, white balance, exposure, etc.).
• Media management and playback.
• Firmware updates.
• Editing and sharing directly to social media.

Maintenance

• Clean the lens with a microfiber cloth to avoid scratches.
• Keep the camera and accessories dry and away from extreme temperatures.
• Do not expose the camera to strong magnetic fields.
• If the camera gets wet, dry it with a soft cloth and let it air dry completely before using.

Safety Guidelines

• Do not use the camera while driving or operating machinery.
• Do not aim the camera directly at the sun or strong light sources to avoid damaging the sensor.
• Keep the camera and accessories out of reach of children and pets.
• Use only DJI-approved batteries and chargers.

Troubleshooting

• Camera won’t power normally: Press and hold the Power Button for 3 seconds to force restart.
• Lens is dirty or scratched: Clean the lens with a microfiber cloth to avoid scratches.
• Camera got wet: Dry it with a soft cloth and let it air dry completely before using.
• Issues related to storage: Ensure the microSD card is inserted and meets requirements (up to 256GB; Class 10 or UHS‑I required).