DJI Pocket 2 Creator Combo – 3 Axis Gimbal Stabilizer
Introduction
DJI Pocket 2 is a handheld gimbal camera that combines mobility and stability in one device. It shoots sharp 64 MP photos and stable video at up to 4K 60fps. The onboard touchscreen displays a live view from the camera and can control camera and gimbal movements. Create the perfect shot with intelligent modes such as ActiveTrack, Zoom, Panorama, Timelapse, and HDR Video and enjoy high quality sound recording with four microphones that boast wind noise reduction. Connect DJI Pocket 2 to DJI Mimo using a mobile device either wirelessly* or by adapter. The app can be used to create professional-quality videos and to share to social media instantly in Story mode. Accessories such as the Mini Control Stick, Do-It-All Handle, Wireless Microphone Transmitter, Micro Tripod, Tripod Mount (1/4”), and Wide-Angle Lens can be used to enjoy more DJI Pocket 2 features. The Do-It-All Handle is required in order to connect with DJI Mimo wirelessly.
Read Before First Use
Read the following documents before using DJI Pocket 2
- User Manual
- Quick Start Guide
- Disclaimer and Safety Guidelines
It is recommended to watch all tutorial videos on the DJI Mimo app or official DJITM website (www.dji.com/pocket-2), and read the disclaimer and safety guidelines before using for the first time. Make sure to review the quick start guide before using for the first time and refer to this user manual for more information.
Overview
- Power Button
- Lanyard Hole
- Detachable Base
- Microphone*
- Touchscreen
- Universal Port (with Cover)
- Status LED
- Shutter/Record Button
- microSD Card Slot
- USB-C Port
- Function Button
- Heat Dissipation Area
- Pan Motor
- Tilt Motor
- Camera
- Roll Motor
Activating DJI Pocket 2
When using DJI Pocket 2 for the first time, activation is required through DJI Mimo. Follow the steps below to activate.
- Press and hold the Power button to power on.
- Remove the cover on the universal port.
- Choose a Lightning or USB-C smartphone adapter to connect to DJI Pocket 2.
- Launch DJI Mimo and follow the on-screen instructions to activate DJI Pocket 2
Operation
Power Button
Press and hold the Power button for one second to power on or off.*
Function Button
In camera view, press once to switch between Video and Photo mode. Press twice to recenter the gimbal. Press three times to switch the camera between facing forward and backward. Press and hold to completely lock the gimbal, during which time the orientation of the camera will not follow the rotation of the handle. This mode is recommended for scenarios where the subject is moving in a straight line and without abrupt movements. When DJI Pocket 2 is powered off, press the Function button once to quickly power.* In the settings of the touchscreen, press the Function button once to return to the previous screen. * When using firmware version v01.02.00.50 or later, users can choose the direction the camera is facing when powering on. Press and hold the Power button to power on with the camera facing the user and press and hold the Function button to power with the camera facing forward.
Shutter/Record Button
- In camera view, press the Shutter/Record button once to take a photo or to start or stop recording a video.
- In settings, press once to return to the camera view.
- During recording, press and hold to pause recording.
Adjusting the Gimbal Manually
The tilt angle of DJI Pocket 2 can be adjusted manually.
WARNING
- In Motionlapse, the pan angle can also be adjusted manually.
- DO NOT touch the camera lens. Otherwise, the quality of the image may be affected by fingerprints or dirt.
Operating the Touchscreen
The touchscreen displays the camera view after DJI Pocket 2 is powered on, as well as the shooting mode, battery level, and microSD card information.
Swipe Up
Swipe up on the touchscreen to enter gimbal settings.
Re-center: tap to re-center the gimbal.
Flip: tap to switch the camera between facing forward and backward.
Fast Follow /
Slow Follow: tap to switch between Slow Follow and Fast Follow.
- In Fast Follow, the gimbal responds faster, but moves more abruptly. It is recommended for scenarios that require fast transitions.
- In Slow Follow, the gimbal responds slower, but the movement is smoother.
Follow/Tilt Locked/FPV:
- Follow: the pan and tilt axes follow the handle while the roll axis remains level. This mode is suitable for most scenarios.
- Tilt Locked: Only the pan axis follows. The tilt axis is locked and the roll axis remains level. This mode is suitable for scenarios such as where the camera position switches between high and low.
- FPV: pan, tilt, and roll axes follow. This mode is suitable for scenarios where the camera position is continuously rotating and there is less stability.
Swipe Down
Swipe down on the touchscreen to enter settings. Swipe left or right to select System Settings, Glamour Effects, Pro Settings, 16MP/64MP Settings, and Gimbal Pitch Control/Zoom Control.
Gimbal Pitch Control/Zoom Control: tap
for Gimbal Pitch Control and
for Zoom Control.
System Settings
Screen Settings: tap the icon to switch between full-screen display and letterbox display.
Storage: displays the remaining capacity of the microSD card. Tap to enter and tap Format to format the microSD card.- FT (Selfie): tap to turn FT (Selfie) on and off. With FT (Selfie) turned on, FaceTrack will be automatically enabled when the camera is turned towards the user and a face is detected.
Accessories: displays information of connected DJI Pocket 2 accessories.
Calibration: tap to calibrate the gimbal. Calibration is used to reduce drift caused by human error or nearby magnetic interference. Place DJI Pocket 2 on a stable and flat surface and do not touch during calibration.
Anti-Flicker: tap to select an anti-flicker frequency according to local regulations.
Key Tone: tap to turn the key tone on and off.
More: reset to default settings, change language, and view device information such as firmware version, serial number, and battery information.
Glamour Effects: tap to turn Glamour Effects on and off. Turn on Glamour Effects to beautify your photos or videos.- 64 MP/16 MP Pixel Settings: Tap to switch between High-Pixel (16 MP) and Ultra High-Pixel (64 MP). The selection will take effect once the shooting mode is entered.
Pro Settings: tap to enable Pro mode. In camera view, tap Pro in the top left corner to adjust settings such as the format, white balance, and exposure parameters.
Swipe Left
Swipe left on the touchscreen to enter the settings of the shooting mode and swipe up or down to select a shooting mode.
Panorama: swipe left to switch between 180° and 3×3.
Photo: swipe left to set the photo ratio and the countdown timer.
Video: swipe left to set the video resolution and frame rate.
HDR Video: tap to select HDR Video mode. The equivalent focal length is 38 mm when using HDR video.
Slow Motion: swipe left to check the speed.
Timelapse: swipe left and then up and down to choose between Timelapse, Motionlapse, and Hyperlapse. Tap the icon in the camera view to set the duration and interval time for Timelapse and- Motionlapse, and the resolution and speed for Hyperlapse. Once set, tap OK to confirm. To begin a Motionlapse, point the camera at the start point and tap the icon. Next, point the camera at the end point and tap the icon again.
INFORMATION
When using firmware version v01.02.00.50 or later, users can access Story mode on the touchscreen. Connect to DJI Mimo and enter playback to complete the Story mode videos using AI Editor.
Swipe Right
Swipe up or down to scroll through photos and videos. Tap to playback videos and tap
to select multiple photos and videos. Swipe right to add favorites 
or delete
photos and videos.
Double Tap
When in Photo, Video, or Slow Motion mode, double-tap the touchscreen to enable ActiveTrack. FaceTrack will be enabled if a face is detected and will enable automatically if the camera is facing toward the user. Press the Function button or tap on the touchscreen to exit ActiveTrack.
WARNING
- ActiveTrack is disabled in the following scenarios: in FPV mode or Video mode at 4K/60fps, when wirelessly connected to DJI Mimo and in Video mode at 4K 48/50/60fps, in Video mode set to High
- Quality video mode at 4K 30fps, and in 8x Slow Motion mode.
- When connected to DJI Mimo, the touchscreen turns off and cannot be used.
Storing Photos and Videos
Footage shot on DJI Pocket 2 can be stored on a microSD card (not provided). A UHS-I Speed Grade 3 rating microSD card is required due to the fast read and write speeds necessary for high-resolution video data. Insert the microSD card into the microSD card slot as shown
Status LED Descriptions
DJI Mimo App
Home Screen
- Camera View: tap to enter the camera view.
- Academy: tap to watch tutorial videos and view manual documents.
- AI Editor: tap to select videos to edit. AI Editor will automatically edit videos with music and transitions that can be shared directly.
- DJI Support: tap to enter the official DJI product support page.
- Forum: tap to enter the official DJI forum page.
- Home: tap to return to the home screen.
- Edit: tap to edit footage from DJI Pocket 2 or import and edit footage from a mobile device.
- Profile: register or log in to a DJI account. View works and settings and connect to the DJI Store.
Camera View
The camera view display may differ depending on the shooting mode. This display is for reference only. Tap on the touchscreen for focusing and metering. For ActiveTrack, drag a box on the screen and DJI Pocket 2 will track the subject. For FaceTrack, DJI Pocket 2 automatically detects faces and will track the subject.
- Home
tap to return to the home screen.
- Battery Level
displays current battery level of DJI Pocket 2.
- microSD Card Information
displays either the remaining number of photos that can be taken or the duration of video that can be recorded according to the current shooting mode.
- Story
tap to select Story template.
- Flip
tap to switch the gimbal from facing forward or backward.
- Re-Center
tap to re-center the gimbal.
- Shutter Button
tap to take a photo or to start or stop recording video.
- Shooting Mode
- Scroll to select the shooting mode. Choose between Story, Panorama, Photo, Video, HDR Video, Slow
- Motion (8x Slow Motion is not available when connected to DJI Mimo), Timelapse, and Motionlapse (enabled in Timelapse settings.)
- Gimbal Settings
select Slow Follow or Fast Follow and choose between Tilt Locked, Follow, and FPV mode.
- Playback
tap to preview photos and videos as soon as they are captured.
- Virtual Joystick
- move the virtual joystick left and right to control the pan axis, and up and down to control the tilt axis.
Settings
- choose Basic or Pro mode for the selected shooting mode. Various parameters can be set when in different shooting modes. Video mode is used as an example below:
- Video Settings
- Basic: Grid, FT (Selfie), and Anti-Flicker are available.
- Pro: More settings are available once Pro is enabled including Focus Mode, White Balance, Overexposure Alert, Histogram, and sound settings (e.g. volume amplification level).
- Gimbal and Handle Settings
- Calibrate the gimbal and turn Gimbal Easy Control on and off. Turn on Gimbal Easy Control to control tilt and pan axes with one virtual joystick. Turn off to control tilt and pan axes on two separate virtual joysticks.
- General Settings
- View device name, device serial number, and version info, and format the microSD card.
- Video Settings
- choose Basic or Pro mode for the selected shooting mode. Various parameters can be set when in different shooting modes. Video mode is used as an example below:
- Glamour Effects
OFF : tap to turn Glamour Effects on and off. Turn on Glamour Effects to beautify your photos or videos.
- Zoom
tap and drag to set the zoom ratio.
- Quality
tap to set the resolution, frame rate, and image quality
Charging DJI Pocket 2
To charge DJI Pocket 2, connect a USB adapter (not provided) to the USB-C port using the provided power cable. The battery is fully charged when the status LED turns off. The battery level is displayed on the touchscreen after powering on DJI Pocket 2. Charging time: approx. 1 hour 13 minutes (when using a 5V/2A USB adapter). The status LED indicates the battery level during charging. Refer to the table below for more information.
- It is recommended to use a 5V/2A USB adapter for optimal charging.
- Make sure to charge DJI Pocket 2 in an environment where the temperature is between 5° and 60° C (41° and 140° F). For safety reasons, DJI Pocket 2 limits the charge current when its temperature is between 45° and 60° C (113° and 140° F). In such scenarios, DJI Pocket 2 cannot be fully charged.
Updating Firmware
The firmware of DJI Pocket 2 must be updated through DJI Mimo. A prompt will appear when new firmware is available. Follow the on-screen instructions to update the firmware.
- A microSD card is required to update firmware.
- Make sure that the battery level of DJI Pocket 2 is at least 15% before updating firmware.
Maintenance
Storing DJI Pocket 2
Store the smartphone adapters in the cover. With DJI Pocket 2 powered off and in storage mode and the microSD card slot facing upward, place DJI Pocket 2 into the cover as shown for safer transportation and storage.
To prevent unnecessary gimbal damage, make sure to place DJI Pocket 2 into the cover correctly
Usage Notices
- DJI Pocket 2 contains delicate components that may be damaged upon impact, which may cause the gimbal to malfunction.
- Make sure there is nothing obstructing the gimbal when DJI Pocket 2 is powered on.
- DJI Pocket 2 is not water resistant. DO NOT use any liquid cleansers. Only use a soft, dry cloth to clean DJI Pocket 2.
- Keep DJI Pocket 2 away from sand and dust to safeguard the sensors and the motors.
- When DJI Pocket 2 is not in use, it is recommended to use the cover to protect the universal port. Avoid touching the universal port during use as it may become hot.
- DO NOT cover or touch the heat dissipation area of DJI Pocket 2 as it may become hot during use. DJI Pocket 2 will stop shooting if it starts to overheat.
- Make sure to hold DJI Pocket 2 and your smartphone firmly when using the smartphone adapter to mount your smartphone to DJI Pocket 2.
Appendix
Specifications
Replacing the Detachable Base
The detachable base can be removed by pulling down as shown and can be replaced with the provided DJI Pocket 2 Tripod Mount (1/4”).
Using the DJI Pocket 2 Mini Control Stick
The provided DJI Pocket 2 Mini Control Stick can be used for gimbal movements and zoom control. Scan the QR code or read the user guide on the official DJI website (www.dji.com/pocket-2).
Downloading the DJI Mimo App
Scan the QR code to the right or search for “DJI Mimo” on the App Store.
Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
Using Other Accessories
After-Sales Information
Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and support
This content is subject to change.
- Download the latest version from www.dji.com/pocket-2
- OSMO is a trademark of DJI OSMO.
- Copyright © 2021 DJI OSMO All Rights Reserved.
Can one disable bluetooth/wifi while using the do-it-all handle, e.g., to reduce exposure to wireless radiation?
The Wi-Fi is not able to be disabled. You may disconnect the Pocket 2 and Do-It-All handle.
FAQS
Just plug them together. Or, get the battery extended pack if you are remote and cant plug it in while ya work.
Theoretically, the DJI Pocket 2 can follow all objects in ActiveTrack. But for this product, we have made special optimizations for human faces, human heads, and shoulders, and pets (cats/dogs), and the tracking accuracy has also been improved.
No. But it will track your face. You simply cannot pick something to track. I guess the computer knows how to track a face, at lease it does when it’s no very far away.
DJI Wireless Microphone can clip on the collar of your shirt or clothes. Please refer to this link for more details and specifications: https://store.dji.com/product/wireless-microphone-transmitter
Both eventually, pocket 2 first because it is more portable
Technically NOT! It is easier to use a smartphone because the viewing area is so much better… but I have use mine without. Results are all over the map without being able to use it with the app
That’s something you need to edit in post-production.
It has Two 1/4″ tripod mounts but does not come the 1/4-20 attachment/adapter.
The only difference between the non creator pack vs creator pack is, The creator pack comes with accessories. Otherwise, the same camera comes with both packs. Slow motion works regardless
Only with the wireless module. Keep in mind that the wireless module does NOT come with the base Pocket 2. You either have to buy the $500 creators edition, or buy the ~$60 module on its’ own.
One of the demonstration or advertising videos on the item page shows a dog with the camera attached to a harness on its back. Looks like an official accessory
DJI has replacements and a Two pack deal as well.
The base unit comes with a 1/4″ mount u do not need the creator combo but in saying that for the features that come with the creator combo u can’t beat the price and the creator combo also is a 1/4″ mount
You will need the app. You can pull the memory chip and download directly to a PC or mac or Linux box. USe the app you will be happier.
