DJI Matrice 4 Series Drone User Manual
Specifications
Aircraft
- Model M4T/M4E/M4T-BD/M4E-BD/JV31/JV32
- Operating Temperature -10° to 40° C (14° to 104° F)
- Operating Frequency [1] 2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz
- Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
- 5.1 GHz: <23 dBm (FCC/CE)
- 5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <30 dBm (SRRC)
Intelligent Flight Battery
- Capacity 6741 mAh
- Standard Voltage 14.76 V
- Battery Type Li-ion 4S
- Charging Temperature 5° to 40° C (41° to 104° F)
Model TKPL2
Enterprise
- Operating Frequency [1] 2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz
- Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
- 5.1 GHz: <23 dBm (FCC/CE)
- 5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <30 dBm (SRRC)
Wi-Fi
- Protocol 802.11 a/b/g/n/ac/ax
- Operating Frequency [1] 2.400-2.4835 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz
- Transmitter Power (EIRP) 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC)
- 5.1 GHz: <26 dBm (FCC), <23 dBm (CE/SRRC/MIC)
- 5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE)
Bluetooth
- Protocol Bluetooth 5.2
- Operating Frequency 2.400-2.4835 GHz
- Transmitter Power (EIRP) <10 dBm
Aircraft
- Gimbal and Camera [1]
- Omnidirectional Vision System
- Extension Port
- Downward Vision System
- Three-Dimensional Infrared Sensing System
- Auxiliary Light
- Front LEDs
- Motors
- Propellers
- Aircraft Status Indicators
- Landing Gears (built-in antennas)
- GNSS Antenna
- Beacon
- Intelligent Flight Battery
- Power Button
- Battery Level LEDs
- Battery Buckles
- USB-C Assistant Port (E-Port Lite)
- microSD Card Slot
- Cellular Dongle Compartment
- E-Port
DJI MATRICETM 4T and 4E are equipped with different cameras. Refer to the actual product purchased.
Remote Controller
- Touchscreen
- Connection Status LED
- Control Sticks
- Back Button
- L1/L2/L3/R1/R2/R3 Buttons
- Return to Home (RTH) Button
- Microphones
- Status LED
- Battery Level LEDs
- Power Button
- 5D Button
- Flight Pause Button
- microSD Card Slot
- USB-C Port
- External Antennas
- Customizable C3 Button
- Gimbal Dial
- Record Button
- Flight Mode Switch
- HDMI Port
- Internal Antennas
- USB-A Port
- Focus/Shutter Button
- Camera Settings Dial
- Scroll Wheel
- Customizable C1/C2 Buttons
- Rear Cover
- Battery Release Button
- Battery Compartment
- Rear Cover Release Button
- Cellular Dongle Compartment
Watching the Tutorials
Scan the QR code or visit the DJI official website to watch the tutorial videos.
https://enterprise.dji.com/matrice-4-series/video
Charging the Battery
Charge the remote controller to activate the internal battery before using it for the first time.
Preparing the Aircraft
- Remove the gimbal protector from the camera
- Unfold the front arms
- Unfold the rear arms
- Install the Intelligent Flight Battery
- Match the propellers to the motors
- Press the propellers down and rotate until they click into place
Preparing the Remote Controller
- DO NOT operate other wireless devices at the same frequency as the remote controller, to avoid signal interference.
- A warning prompt appears in DJI Pilot 2 if the transmission signal is weak. Adjust the antennas to make Sure that the aircraft is within the optimal transmission range.
Getting Ready for Takeoff
Power on/off: Press and then press and hold the power button.
A DJI account and internet connection are required to activate the aircraft and the remote controller.
- Before activating the aircraft in DJI Pilot 2, power on the remote controller and follow the prompts to activate.
Flight
Manual Takeoff/Landing
- Start/Stop Motors: Perform Combination
- Stick Command and hold for two seconds.
Takeoff
Push the left control stick (mode 2) up to take off.
Landing
Push the left control stick (mode 2) down until the aircraft lands. Hold for three seconds to stop the motors.
Control Stick Mode
The default control stick mode is mode 2. The left control stick controls the altitude and heading of the aircraft, while the right control stick controls the forward, backward, and sideward movements.
Always set an appropriate RTH mode and RTH altitude before takeoff.
- Press the Flight Pause button for emergency braking during flight.
The supported operating frequency and the available frequency range may vary in different countries and regions. Refer to the local laws and regulations for more information.
Download PDF: DJI Matrice 4 Series Drone User Manual