dji logo

RM EXPANSION MODULE
Quick Start Guide

Pb Hg Cd Cr+16 PBB PBDE
x dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh
x dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh
x dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh
x dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh dji Action 2 RM Expansion Module - BAR ghgh

T26572

warning 2 Carefully read this entire document and all safe and lawful practices provided before use.

dji Action 2 RM Expansion Module - dji Action 2 RM Expansion Module
Expansion Module Pin Header CAN Cable Double-ended Micro USB Cable

dji Action 2 RM Expansion Module - FIg

  1. Reset Button
  2. microSD Card Slot
  3. Micro USB Port
  4. 14-Pin Expansion Port
  5. CAN BUS Port
  6. LED Indicator
  7. Customizable
  8. 100-Pin Button Expansion Port

 

dji Action 2 RM Expansion Module

Introduction

The RM Expansion Module can be used with the Al Education Set when mounted on a ROBOMASTERTM EP Users can use Rogram in the DJITM Education Hub to program with blocks or Python SDK to create a wide range of Al applications with a RoboMaster EP The RM Expansion Module can also function as an open-source main controller after being connected to a third-party sensor via its 14-pin expansion port, thus linking it to the RoboMaster EP platform to enable more programming applications.

Usage

Attach the core module of the Al Education Set to the Expansion Module, then mount it on the RoboMaster EP

  1. Align the notches on the core module and the RM Expansion Module and attach them together. Then align their 14-Pin expansion ports and press them firmly together.
  2. Use the CAN cable to connect the CAN Bus port of the Expansion Module with any CAN Bus port of the RoboMaster EP Then use the double-ended micro USB cable to connect the Micro USB port of the Expansion Module with the Micro USB port of the Intelligent Controller on the RoboMaster EP Secure the Expansion Module in place on the RoboMaster EP via the screw hole (M3) on the bottom of the module. After the devices are connected, the user can obtain detection results and program the robot using Python SDK or the DJI Education Hub Rogram Editor to execute various Al applications.

warning 2 Refer to the Al Education Set User Manual and RM Expansion Module User Manual for details.

dji Action 2 RM Expansion Module - icon

manual carefully For more information, read the
User Manual: https://www.dji.com/ai-module/downloads
This content is subject to change without prior notice. asp and ROBONIASTER are trademarks of DJI.
Copyright © 2022 All Rights Reserved.
dji Action 2 RM Expansion Module - BAR

Documents / Resources

dji Action 2 RM Expansion Module [pdf] User Guide
Action 2 RM Expansion Module, Action 2, RM Expansion Module

References

Leave a comment

Your email address will not be published. Required fields are marked *