DIY LED Light Panel User Manual

DIY LED Light Panel

Specification

• Product name: LED Light Board

Safety Information

• Note: Must be used under direct adult supervision.
• Self-disassembly is prohibited: Unauthorized personnel are not allowed to attempt self-repair
• Do not use this product in humid or high-temperature environments.
• Avoid direct eye exposure to the beam
• Be sure to cut off the power supply before installation to prevent electric shock

Product introduction

• This product is a high-power LED lamp bead chip with the characteristics of high brightness, low energy consumption, long life, etc., and can be applied to a variety of lighting scenarios.

Installation

1. Preparation: First, ensure that the power supply voltage meets the product’s requirements specifications.
2. Installation work: Make sure the connected power supply is disconnected
3. Fixed position: Install the LED lamp beads firmly in the appropriate position
4. Use with power: It can be used normally when connected to the power supply.

Precautions for use

1. Avoid use in humid or high-vibration environments
2. Please do not operate in a high-temperature environment for a long time.
3. Avoid frequent switching and extend the service life of the product.
4. Unauthorized disassembly is prohibited, and the product must not be disassembled

features

1. High light intensity and wide irradiation range.
2. Energy saving, environmental protection, and long life.
3. Easy to install and compatible with a variety of lighting fixtures

After-sales service

• Warranty period: Within one year, defects caused by non-human factors can be replaced or refunded.
• Customer support: Please contact the brand’s customer service