DIXSG Protective Frame Case Instructions

Protective Frame Case
Instructions

Product Name: [Protective Frame Case]

Product Overview

1. Safety lock buckle, non-destructive installation, comprehensive protection; Specially designed for precise molding of Action 6, with precise hole positions that perfectly fit the body curve.
2. Lightweight design, seamless experience; By using high-strength materials, lightweight is achieved while ensuring durability.
3. Multi functional interface, instantly expandable; We have designed a side ACTION interface and a top cold shoe interface, which can achieve vertical shooting while connecting external microphones/small fill lights/STARTRC ecological products and other devices, instantly unlocking more creative possibilities

Installation Steps

1. Aim the camera at the slot of the protective frame, insert it smoothly, and press it until the buckle is locked;
2. When disassembling, press the side buckle and gently lift the camera to remove it. Do not pull or tug forcefully. The opening of the protective frame is precise and does not affect various operations such as camera on/off, shooting, charging, etc. It also supports expansion accessories.
   Attention: This product does not have waterproof function. Please do not immerse the framed camera in water; Avoid squeezing or dropping the protective frame, regularly clean the dust and stains inside the frame. If there is any damage such as loose or cracked buckles, they should be replaced in a timely manner to avoid affecting the protective effect.