MODify Single Sided Kit 05
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Single Sided Kit 05 combines one slatwall panel and one SEG push-fit graphic panel to create the ideal retail display. With this kit, you can showcase your products with ease by using fixtures like hooks, shelves, waterfalls, or faceout bars; add Ubars and towel bars too! Moreover, the kit allows for easy swapping of the graphic panel for seasonal changes, brand changes, product changes and promotions.
MODify Single Sided Kits should be mounted to a wall or structure for safety and stability.
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications
features and benefits:
Base Kit includes:
– Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
– Heavy-duty aluminum frame, steel base
– Steel, slotted uprights
– One 35”W x 96”H slatwall panel
– One 35”W x 93”H SEG push-fit graphic panel
– Non-rolling base
– Display is easy to assemble and install
– Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
– Towel bars. – U bars
– Faceout bars – Slatwall hooks
– Waterfalls – Shelves
– Nesting Tables 03 & 04
dimensions:
Hardware
Assembled unit:
74”W x 96’H x 19”D
1879.6mm(w) x 2438.4mm(h) x 482.6mm(d)
Approximate Weight:
129 lbs / 58.5134 kg
Graphics
Graphic material: Dye-sublimated fabric
See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit:
https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here
Shipping
Packing case(s):
1 Box
Shipping dimensions:
(96″L x 14″H x 24″D)
2438.4mm(l) x 355.6mm(h) x 609.6mm(d)
Approximate shipping weight:
188 lbs / 85.2754 kg
additional information:
Powder coat color options:
white black silver
Wood laminate color options:
white black natural gray
6/1/2023
MODify Accessories
All Accessories available in white, black, or silver
Slotwall Accessories
MFY-SLT-HK MFY-SLT-FC MFY-SLT-WTR-16-7
4″, 6″, 8″, 10″ & 12″ 6″, 8″, 10″ & 12″
U-Bar Accessories
MFY-TWL-FC MFY-UBR-FC
6″, 8″ & 10″ 6″, 8″ & 10″
Shelf and Hanger Bars
MFY-36-12-SHELF
MFY-SLF-36-12-HB
MFY-SLT-TWL-36-3
MFY-UBR-36-12
MFY-DB-36-17
Tools Required
MULTI HEX KEY PHILLIPS SCREW DRIVER
(INCLUDED) (NOT INCLUDED)
9/16″ SOCKET WRENCH
(NOT INCLUDED)
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
SETUP INSTRUCTIONS
|
QTY |
IMAGE |
DESCRIPTION |
|
3 |
 |
3/8-16 x 2.5″L bolt |
|
1 |
 |
2350MM (92.52in) RIGHT UPRIGHT |
|
3 |
 |
512MM (20.16IN) SUPPORT LEG |
|
1 |
 |
2350MM (92.52in) MIDDLE UPRIGHT |
|
2 |
 |
2250MM (88.58in) OF SWC EXTRUSION |
|
1 |
 |
2350MM (92.52in) LEFT UPRIGHT |
MFY-BOLT-375-16-2.5
- SWC
- RIGHT UPRIGHT
- MIDDLE UPRIGHT
- LEFT UPRIGHT
- SWC PRE-INSTALLED
- BOLT LEFT UPRIGHT TO FOOT
- BOLT MIDDLE UPRIGHT TO FOOT
- BOLT RIGHT UPRIGHT TO FOOT
|
QTY |
IMAGE |
DESCRIPTION |
|
2 |
 |
883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS |
|
1 |
 |
883MM (34.76in) OF SWC EXTRUSION |
|
4 |
 |
WALL BRACKET |
CROSS BRACE SITS ON SUPPORT LEG
SLOT WALL TOP CHANNEL
- SWC PRE-INSTALLED
IMPORTANT! MAKE A HALF TURN TO LOCK EXTRUSIONS
WALL MOUNT CLIPS
- 16″ FROM TOP
- 16″ FROM TOP
**IMPORT**
LOOSEN END CAP TO ATTACH TOP CROSS BRACE
STEP 6
* LOCK TOP CROSS BRACE AND PLACE END CAPS TO ALIGN WALL BRACKETS
(TEMPORARY INSTALLED)
- *FASTEN CLIPS TO WALL
- SWC PRE-INSTALLED
- LOCK CROSS BRACE TO UPRIGHTS
NOTE: BOTTOM CROSS BRACE SITS ON TOP INSIDE EDGE OF LEFT AND RIGHT SUPPORT LEG
Disclaimer: Unit must be permanently secured and fastened to wall or other structure for stability.
|
QTY |
IMAGE |
DESCRIPTION |
|
2 |
|
883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS |
|
14 |
 |
879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION |
|
1 |
 |
879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM BOTTOM CUT |
|
1 |
|
883MM (34.76in) OF SWC EXTRUSION |
|
2 |
 |
7MM SEG PLASTIC END CAP FOR 831 EXTRUSION |
|
1 |
 |
7MM SEG PLASTIC END CAP FOR 830 EXTRUSION |
LOOSEN END CAP TO ATTACH TOP CROSS BRACE
SLOTWALL 005 SLOT WALL BOTTOM CHANNEL
- SWC PRE-INSTALLED
STEP 7
* REMOVE TOP CROSS BRACE AND END CAPS (TEMPORARY INSTALLED)
- SLOTWALL EXTRUSION
STACK 005-879 - LOCK CROSS BRACE TO UPRIGHTS AND PLACE END CAPS
- SWC PRE-INSTALLED
- SLOTWALL
- BOTTOM CUT SLOTWALL
| 1 |  |
(39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| 2 |  |
36in WIDE X 17.25in DEEP – DROP-IN BASE PAN |
THEN PRESS ALONG THE PERIMETER EDGE
MFY-36-17-BASE-PAN
- INSTALL GRAPHICS
- PLACE BASE PAN IN GROOVE(FOOT)
Kit Hardware BOM
|
ITEM |
COMPONENTS | QTY |
DESCRIPTION |
|
004-883 |
2 |
883MM (34.76in) OF SWC EXTRUSION |
|
004-2250 |
2 |
2250MM (88.58in) OF SWC EXTRUSION |
|
005-879 |
14 |
879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION |
|
005-879 |
1 |
879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM BOTTOM CUT |
|
824-512 |
3 |
512MM (20.16IN) SUPPORT LEG |
|
830-2350 |
1 |
2350MM (92.52in) MIDDLE UPRIGHT |
|
830-EC |
1 |
7MM SEG PLASTIC END CAP FOR 830 EXTRUSION |
|
831-2350 |
1 |
2350MM (92.52in) LEFT UPRIGHT |
|
831-2350 |
1 |
2350MM (92.52in) RIGHT UPRIGHT |
|
831-EC |
2 |
7MM SEG PLASTIC END CAP FOR 831 EXTRUSION |
|
835-883-01-01 |
4 |
883MM (34.76in) OF 835 DOUBLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS |
|
MFY-BOLT-375-16-2.5 |
3 |
3/8-16 x 2.5″L bolt |
|
MFY-BRKT3 |
4 |
WALL BRACKET |
|
MFY-DB-36-17 |
2 |
36in WIDE X 17.25in DEEP – DROP-IN BASE PAN |
Kit Graphics BOM
|
ITEM |
COMPONENTS | QTY |
DESCRIPTION |
|
MFY-SS-05-G |
1 |
(39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
Documents / Resources
 |
displaypros 05 MODify Single Sided Kit [pdf] Instruction Manual is_mfy-ss-k-05, 05 MODify Single Sided Kit, MODify Single Sided Kit, Single Sided Kit, Kit |
