displaypros 04 MODify Double Sided Kit
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Double Sided Kit 04 features three double-sided slatwall panels and six SEG push-fit graphic headers. Create the perfect layout of fixtures such as hooks, shelves, waterfalls and bars for this adaptable retail display.
Features and benefits
Base Kit includes
- Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
- Heavy-duty aluminum frame, steel base
- Steel, slotted uprights
- Three double sided 36”W x 96”H slatwall panels
- Six 36”W x 12”H SEG push-fit graphic headers
- Non-rolling base
- Display is easy to assemble and install
- Lifetime hardware warranty against manufacturer defects
Optional Accessories Include
- Towel bars.
- Faceout bars
- Waterfalls
- U bars
- Slatwall hooks
- Shelves
dimensions
Hardware
- Assembled unit:
110”W x 96”H x 37.5”D
2794mm(w) x 2438.4mm(h) x 952.5mm(d) - Approximate Weight:
342 lbs / 155.129 kg
Shipping
- Packing case(s):
1 Box - Shipping dimensions:
(96″L x 14″H x 24″D)
2438.4mm(l) x 355.6mm(h) x 609.6mm(d) - Approximate shipping weight:
406 lbs / 184.159 kg
Graphics
Graphic material: Dye-sublimated fabric
See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here
Additional Information
MODify Accessories
All Accessories available in white, black, or silver
Tools Required
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
SETUP INSTRUCTIONS
| ITEM | COMPONENTS | QTY | DESCRIPTION | |
| 004-883 | 6 | 883MM (34.76in) OF SWC EXTRUSION | ||
| 004-1973 | 6 | 1973MM (77.68in) OF SWC EXTRUSION | ||
| 005-879 | 39 | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION | ||
| 824-947 | 1 | 947MM (37.28IN) LEFT SUPPORT LEG | ||
| 824-947 | 2 | 947MM (37.28IN) MIDDLE SUPPORT LEG | ||
| 824-947 | 1 | 947MM (37.28IN) RIGHT SUPPORT LEG | ||
| 832-2350 | 2 | 2350MM (92.52in) MIDDLE UPRIGHT | ||
| 832-EC | 2 | 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION | ||
| 833-2350 | 1 | 2350MM (92.52in) LEFT UPRIGHT | ||
| 833-2350 | 1 | 2350MM (92.52in) OF 833 DOUBLE SIDED UPRIGHT CLOSED EXTRUSION | ||
| 833-EC | 2 | 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION | ||
| 835-883-01-01 | 9 | 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS | ||
| MFY-BOLT-375-16-2.5 | 4 | 3/8-16 x 2.5″L bolt | ||
| MFY-DB-36-17 | 6 | 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN | ||
Kit Graphics BOM
| MFY-DS-04-A-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| MFY-DS-04-B-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| MFY-DS-04-C-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| MFY-DS-04-D-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| MFY-DS-04-E-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
| MFY-DS-04-F-G | 1 | (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
Documents / Resources
 |
displaypros 04 MODify Double Sided Kit [pdf] Instruction Manual MFY-DS-K-04, 04, 04 MODify Double Sided Kit, MODify Double Sided Kit, Double Sided Kit, Sided Kit |