MKGVBBI Interactive Bubble Wand
“
Product Information
Technical Specifications:
- Packaging Size: 2.5 x 4
- Print Technique: 4 COLOR PROCESS
- Finish Type: MATTE
- Special Printing/Material: FOIL ACCENTS, IRIDESCENT FOIL
Product Usage Instructions
Bubbles and Glow Mode:
Press the front button to change colors. Bubbles will start
automatically.
- Press the front button to change colors.
- Bubbles Mode: Hold the front button for 2
seconds to send colors to another wand. Keep the switch on the
current position to interact with the parade! - Glow Mode: Press the front button to change
colors. - Hold the front button for 2 seconds to send colors to another
wand. Keep the switch on the current position to interact with the
parade!
Power Requirements:
This product requires 3 AA 1.5V batteries, which are
included.
FAQ
Q: What should I do if the product is not working
properly?
A: If the product is not working properly, please ensure that
the batteries are correctly installed and have enough charge. If
issues persist, contact customer support for further
assistance.
Q: Is this product safe for children under 3 years old?
A: No, this product contains small parts and is not suitable for
children under 3 years old due to choking hazards.
“`
Q325_MCC_GLOW_PRJ_LIGHTBULB_1000097885
PROJECT/WF#: 3060051 GRC/PLM#: 1000097885
TECHNICAL SPECIFICATIONS PROCESS COLORS: C M Y K PRINT @ 100%
Packaging Size: 2.5″ x 4″
Print Technique: 4 COLOR PROCESS
Finish Type: MATTE
Special Printing/Material: FOIL ACCENTS
Designer: HELYNN HALLOCK
Item: STARLIGHT – NONE- INTERATIVE BUBBLE WAND- HANGTAG
Date: 11/01/23
Category: GLOW
Round: FMA
Season: Q325
NOT A FINAL MECHANICAL. CREATE MECHANICAL TO PACKAGE SPECIFICATIONS USING LAYOUT PROVIDED. ACTUAL DIE-LINE NEEDS TO BE CREATED BY THE VENDOR.
TARGET PKG COLORS ALL COLORS SHOULD BE PRINTED USING CMYK 4-COLOR PROCESS UNLESS OTHERWISE NOTED. VENDOR TO USE THESE TARGET COLOR PANTONES BELOW FOR COLOR MATCHING ONLY.
DISNEY White C0-M0-Y0-K0
DISNEY Black
PANTONE 269 C PANTONE 7662 C PANTONE 297 C PANTONE 2004 C
C60-M40-Y40-K100
PANTONE 712 C PANTONE 9440 C PANTONE 274 C
Special Printing: IRIDESCENT FOIL
OUTSIDE
IRIDESCENT FOIL
FCC ID: 2A9OKMKGVBBI
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. NON RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED. RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT SUPERVISION. DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES ARE NOT TO BE MIXED. ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED. BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY. EXHAUSTED BATTERIES ARE TO BE REMOVED FROM THE PRODUCT. THE SUPPLY TERMINALS ARE NOT TO BE SHORT CIRCUITED. REMOVE BATTERIES WHEN NOT IN USE OR DISCHARGED.
THIS PRODUCT MAY BE SUPPLIED IN THE RELEVANT COUNTRY/REGION BY:
IN U.S. DISNEY MERCHANDISE SOURCING & DISTRIBUTION, LLC BURBANK, CA 91521
DisneyStore.com
© DISNEY
2.402 GHZ 2.480 GHZ 1000097885
FAC 098396 25094 SHANTOU LOT 13903
INSIDE
INTERACTIVE BUBBLE WAND
INTERACTS WITH PARADE!
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
REQUIRES 3 AA 1.5V BATTERIES, INCLUDED. WARNING: THIS TOY PRODUCES FLASHES THAT MAY TRIGGER EPILEPSY IN SENSITIZED INDIVIDUALS. WARNING! CHOKING HAZARD SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS.
Bubbles and Glow Mode: Press the front button to change colors.
Bubbles will start automatically.
2s
Hold the front button for 2 seconds to send colors to another wand. Keep the switch on current position to
interact with the parade!
Glow Mode: Press the front button to change colors.
2s
Hold the front button for 2 seconds to send colors to another wand. Keep the switch on current position to
interact with the parade!
Documents / Resources
 |
DiSNEP MKGVBBI Interactive Bubble Wand [pdf] Instruction Manual 2A9OKMKGVBBI, MKGVBBI Interactive Bubble Wand, MKGVBBI, Interactive Bubble Wand, Bubble Wand, Wand |