DIGITUS DN-80063-1 5-Port Gigabit Ethernet Switch
Product Information
The Gigabit Ethernet Switch is a 5-port, unmanaged switch designed for desktop use. It allows you to easily expand your network with five additional RJ45 network ports. The switch is compliant with the network standards IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab. It supports auto-negotiation for network speeds of 10/100/1000Mbps and features auto-MDI/MDI-X detection for each RJ-45 port. The switch has a noiseless design without a fan and comes with an external power supply. It is compatible with various operating systems, including Windows, Mac OS, Linux, and Sun.
Product Specifications
| Interface | 5 10/100/1000/Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX |
|---|---|
| Chip | EN8850DH |
| Switching Capacity | 10 Gbps |
| Housing | Plastic housing |
| Power Input | External Power adapter 5V DC/1A |
| LED | Power, 10/100M,1000M, LINK, ACT |
| Fan | Fanless |
| Transfer Method | Store and forward |
| Dimension | Product Size: 82.6*48.6*20.5 mm ; Box Size: 90*84*62mm |
| Weight | Product Weight: 48.5g; Product with Box weight: 135.5g |
| Advanced Functions | Green Technology, saving power up to 85% 802.3X Flow Control, Back Pressure Auto-Uplink Every Port |
| Operating Temperature | 0~40°C (32~104°F) |
| Storage Temperature | -20~70°C (-4~158°F) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
Product Usage Instructions
Installation
- Precautions for Installation
- Do not install the device in an unstable location such as on an unsteady table or an inclined surface.
- Do not place another hub or object that generates heat on this unit.
- Please route all cables properly to prevent people from tripping over them.
- Ensure the air vents on the product are not blocked by other equipment or walls.
- Only use the power cable included with the product. Using other power cables may result in damage or fire.
- Mounting to a Wall:
- To mount the unit directly to the wall, use 2 screws (not included).
- Install the screws apart and slide the mounting holes on the base of the switch over them.
- Install on the Desk:
- Put the switch on the desk.
- Connect it with the network cable and the power adapter.
If you are unable to connect to a network, check the following:
- Is the power cable connected correctly? Also, is the power cable plugged into an outlet or surge protector?
- Is the Ethernet cable connected correctly? Are any cables damaged or loose?
Installation
Precautions for Installation
- Do not install the device in an unstable location such as on an unsteady table or an inclined surface.
- Do not place another hub or object that generates heat on this unit.
- Please route all cables properly to prevent people from tripping over them.
- Ensure the air vents on the product are not blocked by other equipment or walls.
- Only use the power cable included with the product. Using other power cables may result in damage or fire.
Mounting to a Wall
To mount the unit directly to the wall, use 2 screws (not included). Install the screws apart and slide the mounting holes on the base of the switch over them.
Install on the Desk
Put on the Desk, connect with the Network Cable and the power adapter
INTRODUCTION
With this Gigabit Ethernet Switch you can easily expand your Network with five additional RJ45 Network ports. Thanks to the Auto-MDI/MDI-X cable detection every port can be used as uplink. Automatic detection of network speeds 10/100/1000Mbps. No driver of software installation necessary.
FEATURES
- 5-port 10/100/1000Mbps Gigabit Ethernet Switch
- Compliant to the network standards IEEE 802.3, IEEE 802.3u and IEEE 802.3ab
- Auto-negotiation for 10/100/1000 Mbps
- Auto-MDI/MDI-X detection for each RJ-45 port
- Noiseless design – without fan
- External power supply
- Operating system independent supports e.g. Windows, Mac OS, Linux and Sun
SPECIFICATIONS
| Interface | 5 10/100/1000/Mbps RJ45 Ports AUTO
Negotiation/AUTO MDI/MDIX |
| Chip | EN8850DH |
| Switching
Capacity |
10 Gbps |
| Housing | Plastic housing |
| Power Input | External Power adapter 5V DC/1A. |
| LED | Power, 10/100M,1000M, LINK, ACT |
| Fan | Fanless |
| Transfer
Method |
Store and forward |
| Dimension | Product Size:82.6*48.6*20.5 mm ;
Box Size: 90*84*62mm |
| Weight | Product Weight: 48.5g;
Product with Box weight: 135.5g |
| Advanced Functions | Green Technology, saving power up to 85% 802.3X Flow Control, Back Pressure Auto-Uplink
Every Port |
|
Environment |
Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -20℃~70℃ (-4℉~158℉) Operating Humidity: 10%~90% non-condensing.
Storage Humidity: 5%~90% non-condensing |
PACKAGE CONTENT
The package contains the items shown below. If any items are missing, please contact the dealer where you purchased this product. The appearance of this product may vary from the illustration.
- 1 pcs Switch
- 1 pcs Power Adapater
- 1 pcs Quick installation Quide
CONNECTION DIAGRAM
Check whether the connection is correct according to the indicator status in the table below.
| LED | Name | Status | Description |
| PWR | Power Indicator | Always on | Already Power On |
|
1-5Port |
Port Indicator |
Always On | Port Connected
Normally |
| Flashing | Port is transmitting
data |
After the connection is completed correctly, the switch does not require any settings.
Troubleshooting
If you are unable connect to a network, check the following:
- Is the power cable connected correctly? Also, is the power cable plugged into an outlet or surge protector?
- Is the Ethernet cable connected correctly? Are any cables disconnected or.
- Is the link/act/speed LED on? If not, manually set the communication mode of the connected device to 100 Mbps half duplex or 10 Mbps half duplex.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com ASSMANN Electronic GmbH Auf dem Schüffel 3
58513 Lüdenscheid Germany
Documents / Resources
 |
DIGITUS DN-80063-1 5-Port Gigabit Ethernet Switch [pdf] Installation Guide DN-80063-1 5-Port Gigabit Ethernet Switch, DN-80063-1, 5-Port Gigabit Ethernet Switch, Gigabit Ethernet Switch, Ethernet Switch, Switch |