DIGITECH AA‐0378 Programmable Interval 12V Timer User Guide

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com

Technical Specifications

  • Power Input: 12VDC
  • Low current drain: <50mA when relay is on, <5mA when relay is off
  • Timing accuracy: ±1% at all settings
  • Dimensions: 72(L) x 65(W) x 43(H) mm

Notes

  • Never get any part of the module wet.
  • Never attempt to open, modify or repair any part of the module.

Instructions

  • Set the jumpers to program the timer, according to the connection diagram and jumper settings table included.
  • Plug in the supplied to the module, and the black and red cables to a power supply 12V.
  • Connect the device you want to switch to the NO and NC for normally open function or NC and COM for normally closed function.
  • Press the reset button to restart the selected timer0 function.

Jumper Settings

Jumper Settings Table

Circuit Diagram

Circuit Diagram

Documents / Resources

DIGITECH AA‐0378 Programmable Interval 12V Timer [pdf] User Guide
AA 0378, Programmable Interval 12V Timer

References

Leave a comment

Your email address will not be published. Required fields are marked *