DIGITAL WATCHDOG - logoQuick Start Guide

DWC-VAJUNC Junction Box for Vandal Ball Turret Cameras

Junction box for vandal dome, vandal ball and vandal fisheye cameras

DWC-VAJUNC DWC-VFJUNCW DWC-VFZJUNC

DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras

WHAT’S IN THE BOX

Camera Mounting Screws DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig 2 sets Quick Setup Guide DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig2 1
Screws and Plastic Anchors DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig1 4 Mounting Template DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig3 1

NOTE: Download all your support materials and tools in one place.

  1. Go to: http://www.digital-watchdog.com/resources
  2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
  3. Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will appear in the results.

DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - qr codehttp://bit.ly/resources_qr

INSTALLATION

  1. Using the mounting template or the junction box itself, mark and drill the necessary holes on the mounting surface.
  2. Secure the junction box to the mounting surface using the screws and anchors included.
  3. To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included with the camera.
    NOTE: Do not touch the lenses when handling the camera modules. DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig4
  4. Pass wires through and make all necessary connections.
  5. Secure the camera to the mounting bracket using the included screws. The junction box has two (2) camera mounting screw sets and two mounting options. See the table  below for the length of the screws and compatible cameras and which mounting holes to use.DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig5
    Screw size Compatible camera Installation Option
    23mm screws DWC-VA models
    DWC-MVA models
    DWC-MPVA models
    Installation option A
    20mm screws DWC-MV8 and DWC-MPV8 models
    DWC-MVC and DWC-MPVC models
    DWC-PVF and DWC-PPVF models
    DWC-MF and DWC-MPF models
    Installation option A
    35mm screws DWC-MVD and DWC-MPVD models,
    screws are included with the camera.
    Installation option B
  6. Adjust the camera’s lens position and angle and place the cover dome on the camera base to complete the installation.

DIGITAL WATCHDOG DWC VAJUNC Junction Box for Vandal Ball Turret Cameras - fig6

Tel: +1 866-446-3595 / 813-888-9555
digital-watchdog.com
Technical Support Hours: 9:00AM – 8:00PM EST,
Monday through Friday
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.DIGITAL WATCHDOG - logo

Documents / Resources

DIGITAL WATCHDOG DWC-VAJUNC Junction Box for Vandal Ball Turret Cameras [pdf] User Guide
DWC-VAJUNC, DWC-VFJUNCW, DWC-VFZJUNC, Junction Box for Vandal Ball Turret Cameras, Junction Box, Box, Vandal Ball Turret Cameras

References

Leave a comment

Your email address will not be published. Required fields are marked *