Digital Ally DVM-800 Lite In-Vehicle Camera Kit Instructions
The Digital Ally DVM-800 Lite is a complete digital in-vehicle video recording system integrated into a replacement vehicle rearview mirror. The unit contains the digital video/audio recorder, solid state storage memory, 3.5” color monitor, microphone, speaker, battery backup and system controls. A 900MHz Wireless Microphone Kit, 32GB SDHC card, mounts, cables, lifetime firmware upgrades, operating manual and two-year Advanced Exchange Warranty are included with the DVM-800 Lite Kit.
With the DVM-800 Lite, you can achieve higher quality recordings without the file size of HD. The DVM-800 Lite has enhanced 720-pixel codec and customizable quality settings.
NEVER MISS AN IMPORTANT EVENT
Evidence Capture Assurance (ECA)
ECA tells the system to record on a continuous loop. Individual events are recorded, but ECA enables an agency to go back and look at video from an entire shift.
Pre-Event Recording
With Pre-Event enabled, the system is always recording the last 30 seconds to capture the events leading up to the activation of a recording
ENHANCED VIDEO AND AUDIO
High Quality Video | Crystal Clear Audio Our cameras have high quality video ranging from Enhanced D1 Resolution to full HD Resolution. With the combination of our mirror units built in cameras and multiple options for external cameras, you can customize your video feeds, with up to two channels recording simultaneously. Our wireless microphone records enhanced audio for up to 3000 feet from the vehicle.
CUSTOM SOLUTION TO FIT YOUR NEEDS
Highly Configurable Systems
Our camera systems can be configured to work in any way your agency needs. All of our systems have multiple settings that you can configure to make the solution fit any requirements your policy might have, such as, audio/video quality, preevent customization, user control, multiple camera options, and more customization on the back-end with our VuVault Software series and VuVault.com cloud solution.
Included with Purchase:
- DVM-800, Main Unit 32GB
- 32GB SDHC card
- DVM Mount Assembly with Integrated 3.5” color monitor (can be invisible when not in use)
- 900MHz Wireless Microphone with 1000-foot range
- Two in-car covert microphones
- Accessory Kit: Includes Windshield Mounting Puck, Lanyard, Mounting Hardware, Security Tamper Resistant Screw & Key Kit
- Road-facing Camera with Infrared illumination built into the rearview mirror
- Smart Infrared Backseat-facing Camera
- Vehicle Input Controller (modeiiFE-20)
- Main Power Cable to IF Box, 3.1 m (10.1ft.)
- Vehicle Input Controller Cable to DVM 4.6m (15.0ft.)
- DWM-928 System (900MHz) Includes Wireless Microphone, Charging Cradle, Mounting Bracket, and Lapel Microphone
- Backseat Microphone for DWM-928, 20ft., 2.5mm plug
- USB 2.0 Type A to Mini-B Cable, 3.3 ft.
- Wireless Microphone to DVM-800 Cable
- Vehicle Input Controller, Sensor, RJ45 Cable
- Reference Guide
Specifications for DVM-800:
| POWER | |
| Operating Voltage | 13.8VDC |
| On | 360mA @ 13.8VDC |
| Off | 260uA @ 13.8VDC |
| Low Power Standby | 170mA @ 13.8VDC |
| Backup Battery | 3.7v, 1150mA, Rechargeable Lithium Ion Polymer Battery |
| ENVIRONMENTAL/MECHANICAL | |
| Operating Temperature | -20° to +70° C |
| Storage Temperature | -40° to +80° C |
| Dimensions | 48mm (1.9in.)(D) x 279mm (11in.)(W) x 106mm (4.7in.)(H) |
| Weight | 733g (1.62lbs) |
| INTERNAL COMPONENTS | |
| LCD Monitor | 3.5” Color Ultra Bright. 640×480 resolution |
| Real Time Clock | On board, used when GPS signal is lost |
| Accelerometer | 3-axis, ±8g |
| Wi-Fi | 802.11(n) wireless adapter included. Secure FTP transfer through WAP or cellular modem |
| Microphone | Internal (max. input SPL 110dB, sensitivity -30dB) |
| GPS Receiver | 4Hz position update rate, 2.5m position accuracy |
| Video | 2-recording channels @ 30fps(max), H.264, AVI container |
| Audio | Stereo (internal to one channel, external on other) |
| MEDIA STORAGE | |
| Capacity | External SD Card Support: 8/16/32 GB, Class-10, commercial grade 80 R MB/s, 50 W MB/s Internal Memory matches external |
| Secure Media Access | Optional tamper resistant screw can be installed in the access door, requiring the corresponding security key to unlock the access door. (included with the DVM) |
| Pre-Event Buffer | Up to 30 seconds for each of the two recording channels, adjustable in 6 second increments |
| Vehicle Input Controller | |
| Dimensions | 57mm (2.24in) (D) x 29mm (1.14in) (H) x 110mm (4.33in) (L) |
| Input Triggers (Sensors) | Six customizable multi-purpose input triggers. |
| Operating Voltage | 13.8VDC |
| Output Alarm | One (1) normally open, active low output trigger, 2A maximum current |
| Operating Temperature | -20° to +70° C |
| Storage Temperature | -40° to +80° C |
| Radar Support | 9 Pin Serial Female (additional cables required) |
Wireless Microphone Specifications:
| System Range | 3000 feet typical |
| Communication | Bidirectional |
| Microphone Sensitivity | -30dB, Maximum Input SPL 110dB |
| Power | External 12VDC, 0.190mA typical |
| Size | DWM Cradle: 2.75in x 2.99in x 3.15in (70mm x 76mm x 80mm) DWM Microphone: 2.5in x 1.8in x 0.94in (64mm x 46mm x 24mm) |
| Weight | DWM Cradle (BTR800): 233gDWM Wireless Microphone (RMT800): 74g |
| Battery | Internal Li-ion 3.7V/1800mAh cell20 hours In Use with full charge, 14 days Standby 4 hours charge time |
| Frequency | 900MHz FHSS, 50 possible channels |
| Frequency Response | 200 ~ 4200Hz +/- 3 dB Audio |
Pair with these other Digital Ally Products:
- FirstVu HD Body Camera
- 12-Bay Docking Station
- VuLink for Automatic Activation
- VuVault Software
14001 Marshall Dr
Lenexa, KS 66215
Web: www.digitalallyinc.com
Tel: 800.440.4947
Documents / Resources
 |
Digital Ally DVM-800 Lite In-Vehicle Camera Kit [pdf] Instructions DVM-800 Lite In-Vehicle Camera Kit, DVM-800 Lite, In-Vehicle Camera Kit, Camera Kit, Kit |
