LED Pixel Panel
DANGER
Products must not be covered with insulating or flammable materials to prevent abnormal operation or fire hazards.
ATTENTION
- When installing and inspecting the product, the power supply must be disconnected to prevent electric shock.
- Please use the included power adapter and ensure load matching. The use of other power supplies is prohibited.
- LED strips are not fully waterproof; avoid using them outdoors or in humid environments such as bathrooms. (Unless the product is explicitly labeled as waterproof for outdoor use.)
 |
Continuous current(DC) |
 |
USB card |
Meaning of symbols
This symbol means “conforms to the European standard”, which declares “conformity”.
Operation
| Pushbutton switch | Turn the light on or off by pressing the button. |
| Dimmer Switch | The product supports adjusting light brightness and can be controlled via touch, remote control, or app. Please use the corresponding control method based on the switch type. |
| Inductive Switch | Motion-activated lights turn on and off through motion detection and generally do not support dimming. |
Important Notes
When testing the product, please unfold it. Do not bend or curl the product during testing to avoid the risk of overheating.
Documents / Resources
 |
DIGILOG ELECTRONICS LED Pixel Panel [pdf] Instructions LED Pixel Panel, Pixel Panel |