Dialyn GEN2 Sensor Instruction Manual

Thank you for purchasing Dialyn’s advanced tire pressure monitoring system. This product is designed to provide you with real-time tire pressure data to enhance your driving safety and efficiency.

Precaution

Ensure all components are securely fastened before use.
Regularly check the system for any signs of wear or damage.
Follow all installation instructions carefully to ensure optimal performance.

OVERBIEW

SCREW
SENSOR
VALVE STEM
VALVE CAP

SCREW
SENSOR
VALVE STEM
NUT
VALVE CAP

CAUTION

The Dialyn assemblies are replacements or maintenance parts for vehicles that have factory installed TPMS.

Make sure to program sensor by using the Dialyn programming for your specific vehicle make, model and year prior to installation.
In order to guarantee optimal function, the sensor may only be installed with valves and accessories by Dialyn.

Upon completion of installation, test the vehicles TPMS system using procedures described in the original manufacturer’s user guide to confirm proper installation and functionality.

INSTALLATION

Remove the valve cap.
Lubricate the valve stem with assembly grease, avoid lubrication on the sensor with assembly paste.

Pass the valve through the rim hole and use a valve puller to correctly mount the valve.
Mount the tire, please make sure that the sensor is not damaged during mounting

Inflate the tire to the correct tire pressure according to the correct tire pressure according to the vehicle specification. Screw the valve cap back on.

Please note the vehicle manufacturer- specific learning method, which you can find in the vehicle manual or in our Dialyn Sensor programming device.

LIMITED WARRANTY

The manufacturer warrants to the original purchaser that the PMS sensor meets the manufacturing specifications of the product and must be free from defects in materials and workmanship under normal and expected conditions of use for a period of five (5) years from the date of purchase. The warranty will be void if any of the following occurs:

Incorrect or incomplete installation of products
Misuse
Induction of defect by other products
Mishandling of the product and / or any modification of the products

Incorrect application
Damage due to collision or tire failure
Excessive speed, race or competition

The sole and exclusive obligation of the manufacturer under this warranty will be to repair or replace, at the option of the manufacturer, free of charge, any merchandise which does not comply with the above warranty. Merchandise must be returned to the manufacturer with a copy of the original sale or satistactory proof of the date of purchase from the dealer from whom the product was originally purchased.

Notwithstanding the foregoing, in the event that the product is no longer available, manufacturer’s liability to original purchaser shall not exceed the actual amount paid for the product. The manufacturer disclaims all other warranties, express or implied, including any warranty of merchantability. Under no circumstance will the manufacturer be liable to any party or person for any other amount, including, but not limited to, the cost of labor for the installation or reinstallation of the product, and the manufacturer will not be liable for any other damage including, but not limited to, direct, indirect, special, consequential and incidental damages. This limited warranty gives the original purchaser specific legal rights, which may vary from state to state. It is exclusive and replaces all other obligations, responsibilities or warranties, express or implied.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FAQ

How do I know if the system is working?

The system will provide real-time tire pressure data on the display.

What should I do if the sensor is not responding?

Check the battery and ensure all connections are secure.

Can I install the system myself?

Yes, follow the installation instructions provided in the manual.

Documents / Resources

Dialyn GEN2 Sensor [pdf] Instruction Manual
2BNRB-GEN2, 2BNRBGEN2, GEN2 Sensor, GEN2, Sensor

References

User Manual

Dialyn GEN2 Sensor

Specifications

Components

Introduction