DFI BMC Web Setup User Guide

DFI BMC Web Setup

Specifications

• Default BMC LAN IP: 192.168.0.100
• Default BMC USERID: dfi
• Default BMC Password: dfi

Assembly Steps

Please Refer To The Following Steps

Step 1: Insert LAN Cable to Network Socket
Ensure the LAN cable is properly connected to the network socket labeled “BMC LAN”.

Step 2: Enter BIOS to Check BMC IP

• Go to Advanced
• Select H20 IPMI Configuration
• BMC Configuration

Step 3: Choose BMC LAN Channel to Check BMC LAN IP
There are three BMC LAN Channels available:

Select the appropriate BMC LAN Channel.

 You Can Change Your BMC LAN Setting
Modify the BMC LAN settings as needed, choosing between DHCP and Static IP configurations.

BMC IP address

BMC Subnet mask

Step 4: Setup Client Network Configuration
Configure the Client IP to be in the same network area as the BMC IP.

Example

• BMC LAN Channel 1 IP: 192.168.0.100, Subnet Mask: 255.255.255.0
• Client IP: 192.168.0.88, Subnet Mask: 255.255.255.0

Step 5: Enter BMC IP to Browser to Access BMC Web
Use the following default credentials to log in:

• BMC Default USERID: dfi
• BMC Default Password: dfi

Web Browser List

• Google Chrome 86.0.4240.193 (latest stable version)
• Mozilla Firefox Quantum 83.0 (latest stable version)
• Microsoft Edge 41.16299.15.0 (latest stable version)
• Safari (on macOS Sierra) 11.0.2 (latest stable version)

DFI reserves the right to change the specifications at any time prior to the product’s release. This user guide may be based on the product’s revision. For more documentation and drivers, please visit the download page at www.dfi.com/downloadcenter.

Frequently Asked Questions