If you have questions or comments, contact us.
1-800-4-DEWALT • www.dewalt.com
INSTRUCTION MANUAL
Tool Connect™ App for Bluetooth® Lithium Ion Battery Packs
(original instructions)
Copyright DEWALT
Important Safety Instructions
WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following:
WARNING: For your own safety, read the tool instruction manual before using any accessory. Failure to heed these warnings may result in personal injury and serious damage to the tool and the accessory.
READ ALL INSTRUCTIONS
- DO NOT splash or immerse in water or other liquids
- Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.
- If battery contents come into contact with the skin, immediately wash area with mild soap and water.
- If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
- Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
- Charge the battery pack only in DEWALT chargers.
- DO NOT probe pack with conductive objects.
DANGER: Never attempt to open the battery pack for any reason.
WARNING: Do not store or carry battery so that metal objects can contact exposed battery terminals. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits.
- When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and Bluetooth®.
- The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not a security system.
- The connectivity range is up to 100 feet depending on environment and location.
- The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices (such as pacemakers or hearing aids).
- This Class B digital apparatus complies with Canadian ICES-003.
- This device complies with Part 15 of the FCC rules and Industry Canada Licenseexempt RSS standard(s). Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and adaptor.
- Connect the equipment into an outlet on a circuit different from that to which the adaptor is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated (e.i.r.p.) is not more than that necessary for successful communication.
- This device meets with FCC and ISED RF exposure requirements and the antenna(s) used for this transmitter must not transmit simultameously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
- Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the device.
NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks by DEWALT is under license. Other trademarks and trade names are those of their respective owners.
FUNCTIONALITY
DEWALT Bluetooth battery packs are capable of connecting with mobile devices that support Bluetooth® Smart (or Bluetooth® 4.0) technology. To see if your mobile device is compatible, visit:
http://www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx
DEWALT Tool Connect™ is an optional application for your smart device (such as a smart phone or tablet) that can connect and control DEWALT products that are specifically marked with the Bluetooth® Smart logo.
Getting Started with DEWALT Tool Connect™
NOTE: The Tool Connect™ App is governed by separate terms and conditions available for viewing through the mobile application.
Step 1: Download the DEWALT Tool Connect™ application at:
Step 2: Follow the instructions in the app to create your Tool Connect™ account.
Step 3: Connect your battery pack with the DEWALT Tool Connect™ app by going to
the Home screen and select Add Tool. You will then be prompted to push and hold the State of Charge button to activate the pairing process.
Step 4: Once the connection is established, you will be prompted to give the product an individual name as well as confirm that you would like to register the product on your DEWALT.com account.
For more information on DEWALT Tool Connect™ functionality and features, please call 1-800-4-DEWALT (1-800-433-9258), visit www.dewalt.com or view the FAQ page and help screens located inside the mobile application.
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286
(NOV24) Part No. xxxxxx Copyright © 2015, 2024 DEWALT
The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme, the “D” shaped air intake grill, the array of pyramids on the handgrip, the kit box configuration, and the array of lozenge-shaped humps on the surface of the tool.
Documents / Resources
 |
DEWALT Tool Connect App [pdf] Instruction Manual NA091171, YJ7-NA091171, YJ7NA091171, Tool Connect App, Connect App, App |
