DESIGN ML-100 Standing Table
Overview
- This document provides assembly instructions for the ML-100 standing desk by M Design.
- Follow the steps carefully to ensure proper assembly.
Specifications
| Component | Quantity | Description |
|---|---|---|
| A | 37x | Connector |
| B | 37x | Cam Lock |
| C | 16x | Wooden Dowel 8*40MM |
| D | 8x | Screw 3.5*35MM |
| E | 16x | Screw 5*25MM |
| F | 10x | Bracket |
| G | 54x | Cover Cap |
| H | 2x | Wall Anchor |
Parts And Tools
Assembly Instructions
- Assemble the frame using parts 2, 3, 4, and 5. Secure with 8x D screws.
- Attach parts 8, 9, and 12 using connectors A, cam locks B, and dowels C. Use 6x A, 6x B, and 4x C.
- Assemble the shelving unit with parts 6, 10, 11, and 16. Secure with 20x A, 20x B, and 6x F brackets.
- Attach the drawer base 15 to the assembled unit.
- Connect parts 8, 9, and 14 using 2x C dowels.
- Secure the structure with 4x E screws and 4x F brackets.
- Attach the top panel 1 using 12x E screws.
- Secure the entire assembly to the wall using 2x H wall anchors. Finish with 54x G cover caps.
FAQ
What tools are required for assembly?
A screwdriver and a hammer are recommended for assembly.
How long does assembly take?
Assembly typically takes about 1-2 hours.
Can the desk be disassembled?
Yes, the desk can be disassembled for moving or storage.
What is the weight capacity of the desk?
The desk can support up to 100 kg.
Documents / Resources
 |
DESIGN ML-100 Standing Table [pdf] Instruction Manual 5544X, 8 Dx xD8, 20 x A, 20 x B, 6 x F, 6 x A, 6 x B, 4 x C, 2 x C, 4 x E, 4 x F, 12 x E, 10 x A, 10 x B, 10 x C, 2 x H, 5G4xx54G, ML-100 Standing Table, ML-100, Standing Table, Table |
