DESIGN 214-1 Electric Stacker with Leash
Product Specifications
- A1: 1 piece
- A1x1: 1 piece
- C: 1 piece
- Cx1: 1 piece
- D: 1 piece
- Dx1: 1 piece
- E: 1 piece
- Ex1: 1 piece
- F1: 1 piece
- F1x1: 1 piece
- H: 1 piece
- Hx1: 1 piece
- I1: 1 piece
- I1x2: 2 pieces
- J: 1 piece
- Jx1: 1 piece
- K: 2 pieces
- L: 4 pieces
- M: 1 piece
- Mx1: 1 piece
- N: 1 piece
- O: 1 piece
- P: 2 pieces
- Q: 4 pieces
- R: 10 pieces
- S: 8 pieces
- M4: 10mm screws – 10 pieces
- T: 6 pieces
- U: 16 pieces
- V: 1 piece
- W: 4 pieces
- X: 4 pieces
- Y: 1 piece
- Z: 1 piece
- M4: 14mm screws – 1 piece
Product Usage Instructions
- Step 1:
Assemble Dx1 and Lx4 Cx1 together. - Step 2:
Combine Jx1 and I1x2 together. Add Sx2 and Cx1. Finish by adding Rx4. - Step 3:
Attach Dx1 and Cx1 together. - Step 4:
Secure Ux4 and A1x1 together. Then, add Ex1 and finish by attaching Rx6. - Step 5:
Attach F1x1 and Tx6 together. - Step 6:
Combine Kx2 and Hx1 together. Then, attach Ux12. - Step 7:
Follow the sequence by adding Mx1 to the right. - Step 8:
Attach Nx1, Ox1, Sx2, Px2 together.
Step 9: - Add Qx4 to the assembly.
Step 10: - Finish by attaching Vx1 to the product.
Frequently Asked Questions (FAQ):
Q: What should I do if I have extra parts left after assembly?
A: It is normal to have a few extra parts as spares are sometimes provided. If the product functions correctly, the extra parts can be disregarded.
Installation
PARTS
NOTES: If you want to purchase the similar cube, use parts S,W,X.
Installation STEP
- STEP 1
- STEP 2
- STEP3
- STEP4
- STEP5
- STEP6
- STEP7
- STEP8
- STEP9
Documents / Resources
 |
DESIGN 214-1 Electric Stacker with Leash [pdf] Installation Guide 214-1, 1361, 1363, 1365, 214-1 Electric Stacker with Leash, 214-1, Electric Stacker with Leash, Stacker with Leash, with Leash, Leash |
