Contents
hide
DEFINITIVE TECHNOLOGY DM90TM Bipolar Floor Standing Speaker User Guide
1 Unpack
Check that the items shown are included in the box.
2 Remove the Plate
Remove the top plate from the tower speaker by
pushing down the right side and then pulling up.
3 Place
Plug the height channel into the top of the tower speaker.
4. Connect Speaker Wires to the Binding Posts
Connect two speaker wires to the height channel terminals on your tower speaker
5. Connect the Speaker Wires to Your Amplifier
Connect the other ends of your speaker wires to your amplifier.
Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –.
6 Setup is Complete!
support.definitivetechnology.com
Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker sound and volume. Scan the QR code to download the user
manual, see frequently asked questions, or get troubleshooting assistance.
Read More About This Manual & Download PDF:
Documents / Resources
 |
DEFINITIVE TECHNOLOGY DM90TM Bipolar Floor Standing Speaker [pdf] User Guide DM90TM, DM70, DM8, DM90TM Bipolar Floor Standing Speaker, DM90TM, Bipolar Floor Standing Speaker, Floor Standing Speaker, Standing Speaker, Speaker |